VisionCB-STM32MP1-STD

VisionCB-STM32MP1-STD

VisionCB-STM32MP1-STD is a carrier board for the VisionSOM-STM32MP1 family of computer-on-modules which are powered by STMicroelectronics SOC (dual core ARM Cortex-M7 + single Cortex-M4). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.

Documentation

• VisionCB-STM32MP1-STD v.1.1 Datasheet and Pinout
• VisionCB-6ULL-STD v. 2.0 - Datasheet
• VisionCB-6ULL-STD v. 2.0 - Wiki Page for CB (Additional Resources)
• VisionCB-6ULL-STD v. 2.0 - STEP
• VisionCB-6ULL-STD v. 2.0 - Schematic

How to

• VisionCB-STM32MP1-STD Power Supply

Specifications

SOM compatibility	VisionSOM-STM32P1 module with STMicroelectronics STM32MP15x processor
SOM socket	SODIMM200
Display connector	24-bit RGB parallel interface (FPC50) 1 lane MIPI-DSI interface (FPC30)
Network	1x Ethernet 10/100Mbit/s, RJ45
USB	USB 2.0 host x1 USB-OTH 2.0 x1
Debugger	Built-in ST-Link/v2-1 compatible (SWD)
Console interface	USB/UART
Switches	2+1 (reset)
LEDs	3+2 (3.3 and 5V power)
Connectors	Raspberry Pi compatible (40 pins, 2,54mm) Universal GPIO header (40 pins, 2,54mm) MicroSD socket
RTC Backup	Battery CR1220 socket
Power supply	External 9-12V DC
Temperature Range	0 to +70°C
Dimensions	160mm x 100mm x 17mm