VisionCB-6ULL-STD: Difference between revisions
From SomLabs Wiki
No edit summary |
No edit summary |
||
| Line 9: | Line 9: | ||
|cb_switches=4+1 (reset) | |cb_switches=4+1 (reset) | ||
|cb_leds=4 + 1 (power) | |cb_leds=4 + 1 (power) | ||
|cb_connectors=Raspberry Pi compatible (40 pins, 2,54mm), | |cb_connectors=Raspberry Pi compatible (40 pins, 2,54mm), Arduino Rev3 | ||
|cb_rtc_backup=none | |cb_rtc_backup=none | ||
|cb_power_supply=External 9-12V DC | |cb_power_supply=External 9-12V DC | ||
Latest revision as of 08:53, 7 April 2020
| VisionCB-6ULL-STD |
|
VisionCB-6ULL-STD is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX 6UL or i.MX 6ULL application processors (ARM Cortex-A7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, UART, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product. |
Documentation
| Specifications |
| SOM compatibility | VisionSOM-6UL and VisionSOM-6ULL module with NXP i.MX6ULL processor |
| SOM socket | SODIMM200 |
| Display connector | 24-bit RGB parallel interface (FPC50) |
| Network | 1x Ethernet 10/100Mbit/s, RJ45 |
| USB | USB 2.0 host x1, USB-OTG 2.0 x1 |
| Debugger | JTAG connector for external debugger |
| Console interface | USB/UART |
| Switches | 4+1 (reset) |
| LEDs | 4 + 1 (power) |
| Connectors | Raspberry Pi compatible (40 pins, 2,54mm), Arduino Rev3 |
| RTC Backup | none |
| Power supply | External 9-12V DC |
| Temperature Range | 0 to +70°C |
| Dimensions | 130mm x 90mm x 17mm |
