Personal tools

VisionCB-STM32MP1-STD Datasheet and Pinout: Difference between revisions

From SomLabs Wiki

Jump to: navigation, search
← Older editNewer edit →
Line 248: Line 248:
</center>
</center>


== Arduino compatible I/O headers (J500-J503) ==
== Universal I/O header ==
[[File:VisionCB-2-0-arduino.png|center|600px]]
[[File:VisionCB-STM32MP1-STD-v11 uniio.png|center|700px]]
 




<center>
{| class="wikitable"
{| class="wikitable"
! style="text-align: center; font-weight: bold;" | Pin
! style="text-align: center; font-weight: bold;" | Pin
! style="text-align: center; font-weight: bold;" | Arduino name
! style="text-align: center; font-weight: bold;" | Default function name
! style="text-align: center; font-weight: bold;" | Default function name
! style="text-align: center; font-weight: bold;" | Description
! style="text-align: center; font-weight: bold;" | Description
|-
|-
| colspan="4" | Power connector J500, red connector
| 1 || +3.3V || +3.3V generated by DC/DC built-in SOM (limited current load)
|-
| 2 || +3.3V || +3.3V generated by DC/DC built-in SOM (limited current load)
|-
| 3 || +3.3V || +3.3V generated by DC/DC built-in SOM (limited current load)
|-
| 4 || LCD-B7 (DATA7) || PB9 - universal GPIO with 3.3V logic levels
|-
|-
| 1
| 5 || SD2-CLK || PE3 - universal GPIO with 3.3V logic levels
| -
| -
| -
|-
|-
| 2
| 6 || LCD-B2 (DATA2) || PD6 - universal GPIO with 3.3V logic levels
| IOREF
| VCC-3V3
| +3.3V generated by internal SOM LDO converter (limited load current).
|-
|-
| 3
| 7 || SD2-CMD || PG6 - universal GPIO with 3.3V logic levels
| RESET
| POR-B
| External warm reset input, active L.
|-
|-
| 4
| 8 || LCD-VSYNC || PA4 - universal GPIO with 3.3V logic levels
| 3.3V
| VCC-3V3
| +3.3V generated by internal SOM LDO converter (limited load current).
|-
|-
| 5
| 9 || SD2-DATA0 || PB14 - universal GPIO with 3.3V logic levels
| 5V
| VCC-5V0
| +5V generated by carrier board built-in DC/DC converter.
|-
|-
| 6
| 10 || LCD-HSYNC || PC6 - universal GPIO with 3.3V logic levels
| GND
| GND
| -
|-
|-
| 7
| 11 || SD2-DATA1 || PB15 - universal GPIO with 3.3V logic levels
| GND
| GND
| -
|-
|-
| 8
| 12 || LCD-B4 (DATA4) || PE12 - universal GPIO with 3.3V logic levels
| VIN
| VCC-3V3
| +3.3V generated by internal SOM LDO converter (limited load current).
|-
|-
| colspan="4" | Analog inputs connector J501, blue connector
| 13 || SD2-DATA2 || PB3 - universal GPIO with 3.3V logic levels
|-
|-
| 1
| 14 || LCD-B3 (DATA3) || PD10 - universal GPIO with 3.3V logic levels<br>MISO line of SPI3
| AIN0
| GPIO1
| Universal GPIO with 3.3V logic levels.
|-
|-
| 2
| 15 || SD2-DATA3 || PB4 - universal GPIO with 3.3V logic levels
| AIN1
| GPIO5
| Universal GPIO with 3.3V logic levels.
|-
|-
| 3
| 16 || LCD-G2 (DATA10) || PA6 - universal GPIO with 3.3V logic levels
| AIN2
| GPIO8
| Universal GPIO with 3.3V logic levels.
|-
|-
| 4
| 17 || LCD-B6 (DATA6) || PB8 - universal GPIO with 3.3V logic levels
| AIN3
| GPIO9
| Universal GPIO with 3.3V logic levels.
|-
|-
| 5
| 18 || LCD-G4 (DATA12) || PB10 - universal GPIO with 3.3V logic levels
| -
| -
| -
|-
|-
| 6
| 19 || LCD-B5 (DATA5) || PA3 - universal GPIO with 3.3V logic levels
| -
| -
| -
|-
|-
| colspan="4" | Digital I/Os connector J503, yellow connector
| 20 || LCD-G3 (DATA11) || PE11 - universal GPIO with 3.3V logic levels
|-
|-
| 1
| 21 || LCD-G6 (DATA14) || PC2 - universal GPIO with 3.3V logic levels
| DIO0
| UART4-RXD
| Default: UART4 RXD line or universal GPIO with 5V logic levels.
|-
|-
| 2
| 22 || LCD-G7 (DATA15) || PG8 - universal GPIO with 3.3V logic levels
| DIO1
| UART4-TXD
| Default: UART4 TXD line or universal GPIO with 5V logic levels.
|-
|-
| 3
| 23 || LCD-G5 (DATA13) || PF11 - universal GPIO with 3.3V logic levels
| DIO2
| UART3-RTS
| Default: UART3 RTS line or universal GPIO with 5V logic levels.
|-
|-
| 4
| 24 || LCD-R4 (DATA20) || PA5 - universal GPIO with 3.3V logic levels
| DIO3
| UART3-CTS
| Default: UART3 CTS line or universal GPIO with 5V logic levels.
|-
|-
| 5
| 25 || LCD-R2 (DATA18) || PC10 - universal GPIO with 3.3V logic levels<br>SCK line of SPI3
| DIO4
| ENET2_RXER
| Default: ENET2 RX ER line or universal GPIO with 5V logic levels.
|-
|-
| 6
| 26 || LCD-R3 (DATA19) || PB0 - universal GPIO with 3.3V logic levels
| DIO5
| ENET2_TX_CLK
| Default: ENET2 TX CLK line or universal GPIO with 5V logic levels.
|-
|-
| 7
| 27 || LCD-R6 (DATA22) || PA8 - universal GPIO with 3.3V logic levels<br>MOSI line of SPI3
| DIO6
| UART1-RTS
| Default: UART1 RTS line or universal GPIO with 5V logic levels.
|-
|-
| 8
| 28 || LCD-R7 (DATA23) || PE15 - universal GPIO with 3.3V logic levels
| DIO7
| UART1-CTS
| Default: UART1 CTS line or universal GPIO with 5V logic levels.
|-
|-
| colspan="4" | Digital I/Os connector J502, yellow connector
| 29 || LCD-R5 (DATA21) || PA9 - universal GPIO with 3.3V logic levels
|-
|-
| 1
| 30 || LCD-DE || PE13 - universal GPIO with 3.3V logic levels
| DIO8
| ENET2_TXD0
| Default: ENET2 TXD0 line or universal GPIO with 5V logic levels.
|-
|-
| 2
| 31 || GPIO-PC2 || PC2 - universal GPIO with 3.3V logic levels
| DIO9
| ENET2_CRS_DV
| Default: ENET2 CRS DV line or universal GPIO with 5V logic levels.
|-
|-
| 3
| 32 || LCD-PCLK || PE14 - universal GPIO with 3.3V logic levels
| DIO10
| UART2-TXD
| Default: UART2 TXD line or universal GPIO with 5V logic levels.
|-
|-
| 4
| 33 || GPIO-PA14 || PA14 - universal GPIO with 3.3V logic levels
| DIO11
| UART2-CTS
| Default: UART2 CTS line or universal GPIO with 5V logic levels.
|-
|-
| 5
| 34 || LCD-RESET/DSI-RESET || PA1 - universal GPIO with 3.3V logic levels
| DIO12
| UART2-RTS
| Default: UART2 RTS line or universal GPIO with 5V logic levels.
|-
|-
| 6
| 35 || PWR-ON || Function depends on LPCFG configuration (output)
| DIO13
| UART2-RXD
| Default: UART2 RXD line or universal GPIO with 5V logic levels.
|-
|-
| 7
| 36 || PWR-LP || Low power mode signalling output
| GND
| GND
| -
|-
|-
| 8
| 37 || GND || -
| AREF
| VCC-3V3
| +3.3V generated by internal SOM LDO converter (limited load current).
|-
|-
| 9
| 38 || GND || -
| DIO14-SCL
| UART5-RXD
| Default: UART5 RXD line or universal GPIO with 5V logic levels.
|-
|-
| 10
| 39 || GND || -
| DIO15-SDA
|-
| UART5-TXD
| 40 || GND || -
| Default: UART5 TXD line or universal GPIO with 5V logic levels.
|}
|}
 
</center>
Notes:<br />
1. All I/O lines are 5V compatible.<br />
2. RESET line is 5V compatible.<br />
3. Preferred voltage range on AIN0…AIN3 lines is 0…+3.3V.<br />
4. Voltage level compatibility can be changed using jumper selector (V-ARD), but voltage range on AIN0…AIN3 lines must be 0…+3.3V.<br />


== User LEDs connections ==
== User LEDs connections ==

Revision as of 09:43, 7 April 2020

VisionCB-STM32MP1-STD v.1.1 Datasheet and Pinout

General description

is a carrier board for the VisionSOM-STM32MP1 family of computer-on-modules which are powered by STMicroelectronics STM32MP15x application processors (single or dual core ARM Cortex-A7 + internal microcontroller Cortex-M4). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as debugger, USB, Ethernet, UART, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.

The carrier board connects with the SoM via a standard SODIMM200 connector.


Applications

  • Industrial embedded Linux computer
  • Home Appliances
  • Home Automation – Smart Home
  • Human-machine Interfaces (HMI)
  • Point-of-sales (POS) terminals
  • Cash Register
  • 2D barcode scanners and printers
  • Smart grid Infrastructure
  • IoT gateways
  • Residential getaways
  • Machine vision equipment
  • Robotics
  • Fitness/outdoor equipment


Features

  • Carrier Board (Base Board) compatible with the VisionSOM-STM32MP1 family of modules based on STMicroelectronics STM32MP15x application processors
  • SoM Interface: SODIMM200
  • Expansion Connectors:
    • Raspberry Pi compatible connectors 2x20 Pin Header (Male)
    • Universal 2x20 Pin Header (Male)
    • MicroSD card socket
  • Communication Connectors:
    • 1x Ethernet 10/100Mbit/s, RJ45
    • 1x USB Host Type A connectors
    • 1x USB OTG Micro AB connector
    • 1x Console MicroUSB B connector
  • Display Interface:
    • 50-pin FFC/FPC Parallel RGB – 24-bit
    • 30-pin FFC/FPC MIPI-DSI
  • User Interface:
    • 3 Pushbuttons
    • 5 LEDs
  • Boot selector
    • External Power Supply 9-12V DC
    • Temperature Range: 0 to +70°C
  • Board Size: 160mm x 100mm x 17mm

Pictures of VisionCB-STM32MP1-STD v1.1 board

Version Photo
VisionCB-STM32MP1-STD v1.1 board only

Ordering info

VisionCB-STM32MP1-STD v1.1

Block Diagram

Electrical parameters

Parameter Value Units Comment
Min. Typ. Max.
Power Supply 9.0 11.0 12.0 V Positive pole on central connector of J102
Supply current - - 0.15 A Excluding LCD, USB and antoher external loads
LCD Power Supply 3.25 3.4 3.5 V Optionally 5V
MicroSD Card Power Supply 3.15 3.3 3.45 V -
GPIO voltage 3.3 V -

Boot Selector

BOOTx Boot Mode Description
BOOT2 BOOT1 BOOT0
0 0 0 UART and USB Wait incoming connection on:
- USART2/3/6 and UART4/5/7/8 on default pins
- USB high-speed device
0 0 1 Serial NOR Flash Not used on VisionSOM-STM32MP1
0 1 0 eMMC eMMC on SDMMC2
0 1 1 NAND Flash Not used on VisionSOM-STM32MP1
1 0 0 - Not used on VisionSOM-STM32MP1
1 0 1 SD card SD card on SDMMC1
1 1 0 UART and USB Wait incoming connection on:
- USART2/3/6 and UART4/5/7/8 on default pins
- USB high-speed device on OTG_HS_DP/DM pins
1 1 1 Serial NAND Flash Not used on VisionSOM-STM32MP1

1. By default lines BOOT3...BOOT0 are pulled-down with 1k resistors

Raspberry Pi compatible I/O header


Pin Default function name Description
1 +3.3V +3.3V generated by DC/DC built-in SOM (limited current load)
2 +5V +5V generated by carrier board built-in DC/DC converter
3 DSI-I2C-SDA I2C4 SDA line
4 +5V +5V generated by carrier board built-in DC/DC converter
5 DSI-I2C-SDA I2C4 SCL line
6 GND -
7 UART8-CTS Default: UART8 CTS line or universal GPIO with 3.3V logic levels
8 UART3-TXD Default: UART3 TXD line or universal GPIO with 3.3V logic levels
9 GND -
10 UART3-RXD Default: UART3 RXD line or universal GPIO with 3.3V logic levels
11 UART8-RTS Default: UART8 RTS line or universal GPIO with 3.3V logic levels
12 GPIO-PD12 Shared with switch S100/10k pullup
13 - -
14 GND -
15 - -
16 GPIO-PD11 Shared with switch S101/10k pullup
17 +3.3V +3.3V generated by DC/DC built-in SOM (limited current load)
18 GPIO-PG12 Shared with user LED (D102, yellow)
LED is buffered by logic inverter
19 LCD-R6 (DATA22) PA8 GPIO line
SPI3 MOSI
20 GND -
21 LCD-B3 (DATA3) PD10 GPIO line
SPI3 MISO
22 GPIO-PA12 Shared with user LED (D100, green)
LED is buffered by logic inverter
23 LCD-R2 (DATA18) PC10 GPIO line
SPI3 SCK
24 GPIO-PA11 Shared with user LED (D101, red)
LED is buffered by logic inverter
25 GND -
26 USART6-RXD Default: UART6 RXD line or universal GPIO with 3.3V logic levels
27 - -
28 - -
29 DSI-BL-PWM PD15 GPIO line
TIM4 CH4 PWM output
30 GND -
31 GPIO-PB1-ADC1-5 Universal GPIO line with 3.3V logic levels or ADC input
32 USART6-TXD Default: UART6 TXD line or universal GPIO with 3.3V logic levels
33 GPIO-PC0-ADC1-10 Universal GPIO line with 3.3V logic levels or ADC input
34 GND -
35 GPIO-PC3-ADC1-13 Universal GPIO line with 3.3V logic levels or ADC input
36 GPIO-PA13 Shared with PHY Ethernet controller interrupt line
37 GPIO-PA0-ADC1-16 Universal GPIO line with 3.3V logic levels or ADC input
38 GPIO-PB6 Universal GPIO with 3.3V logic levels
39 GND -
40 GPIO-PF10 Universal GPIO with 3.3V logic levels

Universal I/O header


Pin Default function name Description
1 +3.3V +3.3V generated by DC/DC built-in SOM (limited current load)
2 +3.3V +3.3V generated by DC/DC built-in SOM (limited current load)
3 +3.3V +3.3V generated by DC/DC built-in SOM (limited current load)
4 LCD-B7 (DATA7) PB9 - universal GPIO with 3.3V logic levels
5 SD2-CLK PE3 - universal GPIO with 3.3V logic levels
6 LCD-B2 (DATA2) PD6 - universal GPIO with 3.3V logic levels
7 SD2-CMD PG6 - universal GPIO with 3.3V logic levels
8 LCD-VSYNC PA4 - universal GPIO with 3.3V logic levels
9 SD2-DATA0 PB14 - universal GPIO with 3.3V logic levels
10 LCD-HSYNC PC6 - universal GPIO with 3.3V logic levels
11 SD2-DATA1 PB15 - universal GPIO with 3.3V logic levels
12 LCD-B4 (DATA4) PE12 - universal GPIO with 3.3V logic levels
13 SD2-DATA2 PB3 - universal GPIO with 3.3V logic levels
14 LCD-B3 (DATA3) PD10 - universal GPIO with 3.3V logic levels
MISO line of SPI3
15 SD2-DATA3 PB4 - universal GPIO with 3.3V logic levels
16 LCD-G2 (DATA10) PA6 - universal GPIO with 3.3V logic levels
17 LCD-B6 (DATA6) PB8 - universal GPIO with 3.3V logic levels
18 LCD-G4 (DATA12) PB10 - universal GPIO with 3.3V logic levels
19 LCD-B5 (DATA5) PA3 - universal GPIO with 3.3V logic levels
20 LCD-G3 (DATA11) PE11 - universal GPIO with 3.3V logic levels
21 LCD-G6 (DATA14) PC2 - universal GPIO with 3.3V logic levels
22 LCD-G7 (DATA15) PG8 - universal GPIO with 3.3V logic levels
23 LCD-G5 (DATA13) PF11 - universal GPIO with 3.3V logic levels
24 LCD-R4 (DATA20) PA5 - universal GPIO with 3.3V logic levels
25 LCD-R2 (DATA18) PC10 - universal GPIO with 3.3V logic levels
SCK line of SPI3
26 LCD-R3 (DATA19) PB0 - universal GPIO with 3.3V logic levels
27 LCD-R6 (DATA22) PA8 - universal GPIO with 3.3V logic levels
MOSI line of SPI3
28 LCD-R7 (DATA23) PE15 - universal GPIO with 3.3V logic levels
29 LCD-R5 (DATA21) PA9 - universal GPIO with 3.3V logic levels
30 LCD-DE PE13 - universal GPIO with 3.3V logic levels
31 GPIO-PC2 PC2 - universal GPIO with 3.3V logic levels
32 LCD-PCLK PE14 - universal GPIO with 3.3V logic levels
33 GPIO-PA14 PA14 - universal GPIO with 3.3V logic levels
34 LCD-RESET/DSI-RESET PA1 - universal GPIO with 3.3V logic levels
35 PWR-ON Function depends on LPCFG configuration (output)
36 PWR-LP Low power mode signalling output
37 GND -
38 GND -
39 GND -
40 GND -

User LEDs connections


LED PCB symbol GPIO Description
D400/blue GPIO10 GPIO1_10 Default: JTAG MOD input or universal GPIO with 3.3V logic levels.
D401/green GPIO11 GPIO1_11 Default: JTAG TMS input or universal GPIO with 3.3V logic levels.
D403/yellow GPIO12 GPIO1_12 Default: JTAG TDO input or universal GPIO with 3.3V logic levels.
D402/red GPIO13 GPIO1_13 Default: JTAG TDI input or universal GPIO with 3.3V logic levels.

Notes:
1. LEDs are switched on by logic „1” set at the GPIO outputs.
2. LEDs are controlled by current drivers and do not load the GPIOs.

User switches connections


Switch PCB symbol GPIO Description
S402 GPIO3 GPIO1_IO03 Universal GPIO with 3.3V logic levels.
S403 GPIO4 GPIO1_IO04 Universal GPIO with 3.3V logic levels.
S404 GPIO8 GPIO1_IO08 Universal GPIO with 3.3V logic levels.
S405 GPIO9 GPIO1_IO09 Universal GPIO with 3.3V logic levels.

Notes:
1. After button pressing on GPIO lines are set to „0”.
2. GPIO lines connected to switches are separated from board’s environment by 1k resistors.

TFT LCD connector (RGB 24b, J405)


J405 pin Default function name LCD interface name
1 LCD-DATA0 LCD-B0
2 LCD-DATA1 LCD-B1
3 LCD-DATA2 LCD-B2
4 LCD-DATA3 LCD-B3
5 LCD-DATA4 LCD-B4
6 LCD-DATA5 LCD-B5
7 LCD-DATA6 LCD-B6
8 LCD-DATA7 LCD-B7
9 GND GND
10 LCD-DATA8 LCD-G0
11 LCD-DATA9 LCD-G1
12 LCD-DATA10 LCD-G2
13 LCD-DATA11 LCD-G3
14 LCD-DATA12 LCD-G4
15 LCD-DATA13 LCD-G5
16 LCD-DATA14 LCD-G6
17 LCD-DATA15 LCD-G7
18 GND GND
19 LCD-DATA16 LCD-R0
20 LCD-DATA17 LCD-R1
21 LCD-DATA18 LCD-R2
22 LCD-DATA19 LCD-R3
23 LCD-DATA20 LCD-R4
24 LCD-DATA21 LCD-R5
25 LCD-DATA22 LCD-R6
26 LCD-DATA23 LCD-R7
27 GND GND
28 LCD-DE DE
29 LCD-HSYNC HSYNC
30 LCD-VSYNC VSYNC
31 GND GND
32 LCD-PCLK DCLK
33 GND GND
34 GPIO4 TS-YPUL
35 GPIO3 TS-YNUR
36 GPIO2 TS-YPLL
37 GPIO1 TS-YNLR
38 - -
39 - -
40 - -
41 - -
42 UART5-TXD I2C-SCL
43 UART5-RXD I2C-SDA
44 GND GND
45 VCC-LCD +3.3V (controlled by ENET2_TXEN)
46 VCC-LCD +3.3V (controlled by ENET2_TXEN)
47 VCC-5V0 +5.0V
48 VCC-5V0 +5.0V
49 LCD-RESET RESET
50 JTAG-nTRST PWREN

Dimensions

Retrieved from "https://wiki.somlabs.com/index.php?title=VisionCB-STM32MP1-STD_Datasheet_and_Pinout&oldid=1828"