Difference between revisions of "SL-ADP-PCIe-M2 Datasheet and Pinout"
From SomLabs Wiki
(→Electrical parameters) |
(→PCIe Pinout) |
||
| Line 131: | Line 131: | ||
| 8 | | 8 | ||
| PCIe_CLK_n | | PCIe_CLK_n | ||
| − | | | + | | Negative CLK data lane |
|- | |- | ||
| 9 | | 9 | ||
| PCIe_CLK_p | | PCIe_CLK_p | ||
| − | | | + | | Positive CLK data lane |
|- | |- | ||
| 10 | | 10 | ||
| Line 143: | Line 143: | ||
| 11 | | 11 | ||
| PCIe_TXN_p | | PCIe_TXN_p | ||
| − | | | + | | Positive TX data lane |
|- | |- | ||
| 12 | | 12 | ||
| PCIe_TXN_n | | PCIe_TXN_n | ||
| − | | | + | | Negative TX data lane |
|- | |- | ||
| 13 | | 13 | ||
| Line 155: | Line 155: | ||
| 14 | | 14 | ||
| PCIe_RXN_p | | PCIe_RXN_p | ||
| − | | | + | | Positive RX data lane |
|- | |- | ||
| 15 | | 15 | ||
| PCIe_RXN_n | | PCIe_RXN_n | ||
| − | | | + | | Negative RX data lane |
|- | |- | ||
| 16 | | 16 | ||
Revision as of 11:14, 4 May 2021
SL-ADP-PCIe-M2 M.2 PCIe mass storage adapter Datasheet and Pinout
Contents
General description
SL-ADP-PCIe-M2 is adapter dedicated to using M.2 mass storage (SSD) in embedded systems based on i.MX8Mmini.
The SL-ADP-PCIe-M2 module is equipped with FPC16 connector - the same like in SoMLabs carrier board VisionCB-8M-STD.
Features
- Equipped with M.2 key M SSD socket
- Single rail +3.3V power supply
- Dual lane PCIe communication interface
- Operating temperature -30÷+85°C
- Fully compatible with SoMLabs carrier boards equippped with PCIe interface on FPC16 connector
- Built-in 32kHz clock source
- Built-in two LEDs
- Compatible with 2242, 2260 and 2280 modules
- Connection with carrier board using FPC16 cable
Pictures
Note: the SSD module shown in the picture is not included in the SL-ADP-PCIe-M2 kit!
Ordering info
SL-ADP-PCIe-M2 - FPC 16-pin flat cable (A-A) is included. The SSD module is not included in the SL-ADP-PCIe-M2 kit.
Operating ranges
| Parameter | Value | Unit | Comment |
|---|---|---|---|
| Power Supply | |
|
Powered from carrier board |
| Current | |
|
Maximum peak value (excluding SSD module) |
| Working temperature | oC | - |
Electrical parameters
| Signal name | Parameter | Value | Units | ||
|---|---|---|---|---|---|
| Min. | Typ. | Max. | |||
| +3.3V | Supply Voltage | 3.2 | 3.3 | 3.35 | V |
| I3.3V | Supply Current (3.3V) | 1 | - | 15 | mA |
| fSUSCLK | Suspend mode CLK frequency | - | 32 | - | kHz |
Note:
1. Current value without SSD module consumption.
2. nPERST, nCLKREQ and nPEWAKE pins are connected to +3.3V with 10k pull-up resistors.
3. 32kHz generator connected to SUSCLK.
PCIe Pinout
| FPC16 connector pin | Function name | Description |
|---|---|---|
| 1 | - | - |
| 2 | - | - |
| 3 | +3.3V | Power supply |
| 4 | +3.3V | Power supply |
| 5 | - | - |
| 6 | - | - |
| 7 | GND | - |
| 8 | PCIe_CLK_n | Negative CLK data lane |
| 9 | PCIe_CLK_p | Positive CLK data lane |
| 10 | GND | - |
| 11 | PCIe_TXN_p | Positive TX data lane |
| 12 | PCIe_TXN_n | Negative TX data lane |
| 13 | GND | - |
| 14 | PCIe_RXN_p | Positive RX data lane |
| 15 | PCIe_RXN_n | Negative RX data lane |
| 16 | GND | - |
Dimensions
