Difference between revisions of "VisionSOM-V2L Datasheet and Pinout"

Revision as of 12:03, 30 August 2023

VisionSOM-V2L Datasheet and Pinout

General description

The VisionSOM-V2L family is a SODIMM-sized SoM based on the Renesas dual core RZ/V2L application processor which features an advanced implementation of DRP-AI (ML+AI) coprocessor. The VisionSOM-V2L family offers energy efficient dual ARM Cortex-A55 cores (at speed up to 1.2GHz) and ARM Cortex-M33 core (at speed up to 200MHz) as well as a 3D Graphics Processing Unit (ARM Mali-G31 GPU @500MHz, 1920x1080 @60fps) with Open GL 3.2ES/OpenCL 2.0 (Full Profile) capabilities and Video Codec Processor (VCP) with 1920x1080 @30fps.

The VisionSOM-V2L is a multimedia and video oriented, highly integrated SoM (System on Module) featuring high computation power, optinally integrated 2.4GHz Wi-Fi and Bluetooth v5.1 connectivity. The option of integrated, fully certified Wi-Fi and Bluetooth module simplifies the carrier board design and is ideally suited for wireless application. The VisionSOM-V2L provides a variety memory configuration, including 1GB of fast and efficient DDR4 and eMMC Flash that meets our customers requirements.

The SoM supports connections to a variety of interfaces: two high-speed USB 2.0 with integrated PHY, dual Ethernet 1Gbit, audio, MIPI-DSI display output with optional touch panel, MIPI-CSI camera input with scaling processor, serial communication interfaces including 2xCAN. In addition, the system supports industrial grade embedded applications.

SoMLabs also provides a complete hardware and software development board for the SoM in the form of a carrier board and optional TFT display and touch panel.

Applications

• IoT Edge Devices
• IoT gateways
• Machine vision equipment
• AI+ML Decision/Recognition Systems
• Robotics
• Human-machine Interfaces (HMI)
• IP Cameras
• Home Appliances
• Home Automation – Smart Home
• Residential gateways
• Industrial embedded Linux computer
• Fitness/outdoor equipment

Features

• Powered by dual core Renesas RZ/V2L application processor (R9A07G054L27GBG)
• Dual ARM Cortex-A55 core at speed up to 1.2GHz
• ARM Cortex-M33 core at speed up to 200MHz
• Integrated Machine-Learning (ML) and Artificial Intelligence (AI) AI Accelerator (DRP-AI)
• Integrated 3D GPU (ARM Mali-G31 @500MHz)
• 1GB RAM (DDR4)
• Up to 32GB eMMC memory
• Optional Murata radio module 2.4GHz Wi-Fi and Bluetooth v5.1
• Built-in dual USB 2.0 interface
• Built-in 2xCAN-FD interfaces
• Built-in MIPI-DSI display interface
• Built-in MIPI-CSI camera interface
• Power-efficient and cost-optimized solution
• Ideal for industrial IoT and embedded applications
• Integrated security features

Pictures of SOM versions

Version	Photo
eMMC

Ordering info

Block Diagram

Operating ranges

Note:
1. Maximum MPU junction temperature is +105^oC.
2. Junction temperature determines MPU lifetime. Details: NXP AN13214 Application Note.

Electrical parameters

Notes:
1. Total current on both VDD-3V3 outputs.
2. Applying the maximum voltage 3.6V results in shorten lifetime. Recommended value is smaller than 3.45V.
3. Input current is limited by 30k resistor connected in series.

SoM pinout

Important notes:
1. Detail pin configurations description you can find, edit and arrange in dedicated MEX file (with free "iMX PinTool" configurational tool).
2. JTAG-MOD (ball G2) is permanently connected to GND
3. BOOT-MODE0 – RECOVERY line 0 -> BOOT-MODE0=1
4. BOOT-MODE1...MODE3 are premanently connected to GND
5. SDIO2 interface is used to communication with Murata 1ZM radio module
6. eMMC memory is connected to SDIO3 interface

Dimensions