VisionCB-x2L-STD Datasheet and Pinout

VisionCB-x2L-STD v.1.2 Datasheet and Pinout

---

General description

The VisionCB-x2L-STD (with SOM equipped with Renesas RZ/V2L and RZ/G2L MPUs compatible) is a carrier board for the VisionSOM-V2L and VisionSOM-G2L family of computer-on-modules which are powered by dual-core Renesas MPUs (2 x ARM Cortex-A55 + Cortex-M33). The carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, CAN, RS485, audio codec, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product. The VisionCB-x2L-STD is equipped with a simple user interface consisting of 4 buttons and 4 LEDs. VisionCB-x2L-STD carrier board is also equipped with a large number of popular peripherals, including: RS485, CAN, 10/100/1G Ethernet, MIPI display and camera connectors, serial console port on USB vCOM.

Applications

• Multimedia
• Video streaming
• Image inspection
• VisionAI gateway
• Doorbell systems
• EV chargers
• Smart agriculture gateways
• Industrial embedded Linux computer
• Home Appliances
• Home Automation – Smart Home
• Human-machine Interfaces (HMI)
• Point-of-sales (POS) terminals
• IoT gateways
• Machine vision equipment
• Robotics
• Fitness/outdoor equipment

Features

• Carrier Board compatible with the VisionSOM-G2L and VisionSOM-V2L families of modules based on dual core, heterogenous Renesas RZ/V2L and RZ/G2L application processors
• SoM Connector: SODIMM200
• Expansion Connectors:
  • ADC+GPIO connector 2x9 Pin Header (Male)
  • Raspberry Pi Compatible Connectors 2x20 Pin Header (Male)
  • Ethernet #1 (GMII) Connector Pin Header (Male)
• Communication Connectors:
  • 1x Ethernet 10/100/1000Mbit/s (RJ45)
  • 1x CAN (1x3 Pin Header, Male)
  • 1x RS-485 (1x3 Pin Header, Male)
  • 1x USB Host Type A connectors
  • 1x USB OTG Micro AB connector
  • 1x Console MicroUSB B connector
• Audio Interface:
  • Mini-jack 3.5mm (headphones + microphone)
• Display Interface:
  • 30-pin FFC/FPC MIPI-DSI (up to 4 lanes)
• Camera Interface:
  • 30-pin FFC/FPC MIPI-CSI2 (up to 4 lanes)
• User Interface:
  • 4+1 Pushbuttons
  • 4+2 LEDs
• External Power Supply 9-12V DC
• Temperature Range: 0 to +70°C
• Board Size: 160mm x 100mm x 21mm

Pictures of VisionCB-x2L-STD v1.2 board

Version	Photo
VisionCB-x2L-STD v1.2 board only
VisionCB-x2L-STD v1.2 with VisionSOM-x2L

Ordering info

VisionCB-x2L-STD v1.2

Block Diagram

Electrical parameters

Parameter	Value			Units	Comment
	Min.	Typ.	Max.
Power Supply	9.0	12.0	15.0	V	Positive pole on central connector of J200
Supply current	-	-	0.13	A	Excluding LCD, USB and antoher external loads
LCD/Camera Power Supply (logic)	3.25	3.3	3.35	V	-
LCD/Camera Power Supply (backlight and aux)	4.75	4.87	4.95	V	-
Arduino GPIO voltage		3.3		V	-

Power supply connector

The VisionCB-x2L-STD is equipped with external power source connector with pin diameter 2.5mm and hole diameter 6mm. The voltage of the external power source should be within the range 9-12 VDC.

Camera MIPI-CSI interface (FPC/FFC30, 0.5mm)

Pin	Signal	MPU signal	Description
1	GND	-	-
2	CSI-CLK-P	-	-
3	CSI-CLK-P	-	-
4	GND	-	-
5	CSI-DATA0-P	-	-
6	CSI-DATA0-N	-	-
7	GND	-	-
8	CSI-DATA1-P	-	-
9	CSI-DATA1-N	-	-
10	GND	-	-
11	CSI-DATA2-P	-	-
12	CSI-DATA2-N	-	-
13	GND	-	-
14	CSI-DATA3-P	-	-
15	CSI-DATA3-N	-	-
16	GND	-	-
17	I2C1-SCL	RIIC1_SCL	Camera confguration I2C interface (3.3V), pull-uped with 2.2k
18	I2C1-SDA	RIIC1_SDA	Camera confguration I2C interface (3.3V), pull-uped with 2.2k
19	GND	-	-
20	CSI-GPIO0	P17-0	Auxiliary GPIO
21	CSI-GPIO1	P17-1	Auxiliary GPIO
22	-	-	-
23	GND	-	-
24	+3.3V	-	Power supply for external devices
25	+3.3V	-	Power supply for external devices
26	+5V	-	Power supply for external devices
27	+5V	-	Power supply for external devices
28	-	-	-
29	-	-	-
30	GND	-	-

Note:
1. The first pin of the MIPI-CSI connector is located in its upper part.

Display MIPI-DSI interface (FPC/FFC30, 0.5mm)

Pin	Signal	MPU signal	Description
1	GND	-
2	DSI-CLK-P	-	-
3	DSI-CLK-P	-	-
4	GND	-	-
5	DSI-DATA0-P	-	-
6	DSI-DATA0-N	-	-
7	GND	-	-
8	DSI-DATA1-P	-	-
9	DSI-DATA1-N	-	-
10	GND	-	-
11	DSI-DATA2-P	-	-
12	DSI-DATA2-N	-	-
13	GND	-	-
14	DSI-DATA3-P	-	-
15	DSI-DATA3-N	-	-
16	GND	-	-
17	I2C1-SCL	RIIC1_SCL	Display confguration I2C interface (3.3V), pull-uped with 2.2k
18	I2C1-SDA	RIIC1_SDA	Display confguration I2C interface (3.3V), pull-uped with 2.2k
19	GND	-	-
20	DISP-RST	P13-2	Optional display reset signal
21	TP-INT	P17-1	Optional touch-panel interrupt signal
22	TP-RST	P17-2	Optional touch-panel reset signal
23	GND	-	-
24	+3.3V	Power supply for external devices
25	+3.3V	Power supply for external devices
26	+5V	Power supply for external devices
27	+5V	Power supply for external devices
28	DSI-BL-PWM	P16-0	Optional PWM backlight signal
29	DSI-BL-EN	P16-1	Optional ENABLE backlight signal
30	GND	-	-

Note:
1. The first pin of the MIPI-DSI connector is located in its upper part.

USB Console Port and Segger J-Link debugger

MPU Port	GPIO	Description
CONSOLE-TXD	UART4-TXD	Signal connected to J304 pin 2
CONSOLE-RXD	UART4-RXD	Signal connected to J304 pin 3

Notes:
1. Linux console port (UART4 in MPU) uses vCOM interface provided by built-in debugger Segger J-Link.
2. vCOM can be disconnected from MPU with JP801 (jumper CONSOLE in position ON or OFF).
3. Lines TXD and RXD of UART4 are easy to monitoring thanks to using J304 gold-pins.
4. Debug JTAG interface can be disconnected from MPU with JP800 (jumper JTAG in position ON or OFF).

ADC + GPIO connector

Pin	Signal	MPU signal	Description
1	GND	-	-
2	3.3V	-	-
3	ADC-CH0	ADC-CH0	Dedicated analog input, 12-bit ADC, max. 1.8V on input
4	ADC-CH1	ADC-CH1	Dedicated analog input, 12-bit ADC, max. 1.8V on input
5	ADC-CH2	ADC-CH2	Dedicated analog input, 12-bit ADC, max. 1.8V on input
6	ADC-CH3	ADC-CH3	Dedicated analog input, 12-bit ADC, max. 1.8V on input
7	ADC-CH4	ADC-CH4	Dedicated analog input, 12-bit ADC, max. 1.8V on input
8	ADC-CH5	ADC-CH5	Dedicated analog input, 12-bit ADC, max. 1.8V on input
9	ADC-CH6	ADC-CH6	Dedicated analog input, 12-bit ADC, max. 1.8V on input
10	ADC-CH7	ADC-CH7	Dedicated analog input, 12-bit ADC, max. 1.8V on input
11	P12-0	P12-0	GPIO 3.3 voltage levels
12	P13-1	P13-1	GPIO 3.3 voltage levels
13	P7-2	P7-2	GPIO 3.3 voltage levels
14	P11-0	P11-0	GPIO 3.3 voltage levels
15	P48-2	P48-2	GPIO 3.3 voltage levels
16	P4-1	P4-1	GPIO 3.3 voltage levels
17	CAN1-RX	P13-0	GPIO 3.3 voltage levels
18	CAN1-TX	P12-1	GPIO 3.3 voltage levels

Raspberry Pi compatible I/O header

Pin	Default function name	Description
1	+3.3V	+3.3V generated by DC/DC built-in SOM (limited current load)
2	+5V	+5V generated by carrier board built-in DC/DC converter
3	I2C1-SDA	I2C1-SDA line
4	+5V	+5V generated by carrier board built-in DC/DC converter
5	I2C1-SDA	I2C1-SDA line
6	GND	-
7	GPIO4-IO09	Universal GPIO with 3.3V logic levels
8	UART3-TXD	Default: UART3 TXD line or universal GPIO with 3.3V logic levels
9	GND	-
10	UART3-RXD	Default: UART3 RXD line or universal GPIO with 3.3V logic levels
11	GPIO4-IO08	Universal GPIO with 3.3V logic levels
12	SPI2-CLK	Default: SPI2-CLK line or universal GPIO with 3.3V logic levels
13	-	-
14	GND	-
15	-	-
16	SPI2-MISO	Default: SPI2-MISO line or universal GPIO with 3.3V logic levels
17	+3.3V	+3.3V generated by DC/DC built-in SOM (limited current load)
18	SPI2-MOSI	Default: SPI2-MOSI line or universal GPIO with 3.3V logic levels
19	SPI1-MOSI	Default: SPI1-MOSI line or universal GPIO with 3.3V logic levels
20	GND	-
21	SPI1-MISO	Default: SPI1-MISO line or universal GPIO with 3.3V logic levels
22	SPI2-SS0	Default: SPI2-SS0 line or universal GPIO with 3.3V logic levels
23	SPI1-CLK	Default: SPI1-CLK line or universal GPIO with 3.3V logic levels
24	SPI1-SS0	Default: SPI1-SS0 line or universal GPIO with 3.3V logic levels
25	GND	-
26	GPIO-IO22	Universal GPIO with 3.3V logic levels
27	-	-
28	-	-
29	GPIO4-IO12	Universal GPIO with 3.3V logic levels
30	GND	-
31	GPIO4-IO13	Universal GPIO with 3.3V logic levels
32	GPIO4-IO20	Universal GPIO with 3.3V logic levels
33	GPIO4-IO14	Universal GPIO with 3.3V logic levels
34	GND	-
35	GPIO4-IO14	Universal GPIO with 3.3V logic levels
36	GPIO4-IO19	Universal GPIO with 3.3V logic levels
37	GPIO4-IO16	Universal GPIO with 3.3V logic levels
38	GPIO4-IO18	Universal GPIO with 3.3V logic levels
39	GND	-
40	GPIO4-IO17	Universal GPIO with 3.3V logic levels

Arduino Uno compatible I/O header

Pin	Arduino name	Default function name	Description
Power connector J700, red connector
1	-	-	-
2	IOREF	VDD-ARDUINO-IO	Selected +3.3V or +5V (with V-ARD jumper).
3	RESET	POR-B	External reset input, active L.
4	3.3V	VCC-3V3	+3.3V generated by internal SOM LDO converter (limited load current).
5	5V	VCC-5V0	+5V generated by carrier board built-in DC/DC converter.
6	GND	GND	-
7	GND	GND	-
8	VIN	VCC-3V3	+3.3V generated by internal SOM LDO converter (limited load current).
Analog inputs connector J702, blue connector
1	AIN0	-	Not internally connected.
2	AIN1	-	Not internally connected.
3	AIN2	-	Not internally connected.
4	AIN3	-	Not internally connected.
5	-	-	Not internally connected.
6	-	-	Not internally connected.
Digital I/Os connector J704, yellow connector
1	DIO0	UART3-RXD	Default: UART3-RXD line or universal GPIO with 3.3/5V logic levels.
2	DIO1	UART3-TXD	Default: UART3-TXD line or universal GPIO with 3.3/5V logic levels.
3	DIO2	GPIO4-IO15	Universal GPIO with 3.3/5V logic levels.
4	DIO3	GPIO4-IO14	Universal GPIO with 3.3/5V logic levels.
5	DIO4	GPIO4-IO13	Universal GPIO with 3.3/5V logic levels.
6	DIO5	GPIO4-IO12	Universal GPIO with 3.3/5V logic levels.
7	DIO6	GPIO4-IO11	Universal GPIO with 3.3/5V logic levels.
8	DIO7	GPIO4-IO10	Universal GPIO with 3.3/5V logic levels.
Digital I/Os connector J703, yellow connector
1	DIO8	GPIO4-IO08	Universal GPIO with 3.3/5V logic levels.
2	DIO9	GPIO4-IO09	Universal GPIO with 3.3/5V logic levels.
3	DIO10	SPI1-SS0	Default: SPI1-SS0 line or universal GPIO with 3.3/5V logic levels.
4	DIO11	SPI1-MOSI	Default: SPI1-MOSI line or universal GPIO with 3.3/5V logic levels.
5	DIO12	SPI1-MISO	Default: SPI1-MISO line or universal GPIO with 3.3/5V logic levels.
6	DIO13	SPI1-CLK	Default: SPI1-CLK line or universal GPIO with 3.3/5V logic levels.
7	GND	GND	-
8	AREF	VDD-ARDUINO-IO	+3.3V or +5V selected with V-ARD jumper.
9	DIO14	I2C1-SCL	Default: I2C1-SCL line or universal GPIO with 3.3/5V logic levels.
10	DIO15	I2C1-SDA	Default: I2C1-SDA line or universal GPIO with 3.3/5V logic levels.

Notes:
1. I/O logic levels are selected 3.3/5V with V-ARD jumper.
2. RESET line is 3.3 and 5V compatible.

Serial Communication/GPIO header (J305)

Pin	Default function name	Description
1	+3.3V	+3.3V generated by DC/DC built-in SOM (limited current load)
2	GPIO5-IO23	Universal GPIO with 3.3V logic levels By default is connected to MIPI-DSI (J301) as touch-panel interrupt line (with 47k pull-up)
3	UART2-CTS	By default: UART2-CTS or universal GPIO with 3.3V logic levels
4	SAI3-TXFS	By default: SAI3-TXFS or universal GPIO with 3.3V logic levels Connected to MIPI-CSI (J302)
5	UART2-RTS	By default: UART2-RTS or universal GPIO with 3.3V logic levels
6	SAI3-TXC	By default: SAI3-TXC or universal GPIO with 3.3V logic levels Connected to MIPI-CSI (J302)
7	UART2-RXD	By default: UART2-RXD or universal GPIO with 3.3V logic levels
8	SAI3-TXD	By default: SAI3-TXD or universal GPIO with 3.3V logic levels
9	UART2-TXD	By default: UART2-TXD or universal GPIO with 3.3V logic levels
10	SAI3-RXFS	By default: SAI3-RXFS or universal GPIO with 3.3V logic levels By default is connected to MIPI-DSI (J301) as display module reset signal
11	I2C2-SCL	By default: I2C2-SCL or universal GPIO with 3.3V logic levels Default I2C port for PCIe (J303), MIPI-DSI (J301) and MIPI-CSI (J302)
12	SAI3-MCLK	By default: SAI3-MCLK or universal GPIO with 3.3V logic levels
13	I2C2-SDA	By default: I2C2-SDA or universal GPIO with 3.3V logic levels Default I2C port for PCIe (J303), MIPI-DSI (J301) and MIPI-CSI (J302)
14	SPDIF-TX	By default: SPDIC-TX or universal GPIO with 3.3V logic levels By default is connected to MIPI-DSI (J301) as touch-panel reset signal
15	I2C3-SCL	By default: I2C3-SCL or universal GPIO with 3.3V logic levels
16	SPDIF-RX	By default: I2C3-SCL or universal GPIO with 3.3V logic levels By default is connected to MIPI-DSI (J301) as display module PWM backlight control
17	I2C3-SDA	By default: I2C3-SDA or universal GPIO with 3.3V logic levels
18	SPDIF-CLK	By default: SPDIF-CLK or universal GPIO with 3.3V logic levels By default is connected to MIPI-DSI (J301) as display module on/off signal
19	GND	-
20	GND	-

User Interface (switches and LEDs)

User switches

Switch	GPIO	Description
S305 (black, most on the left)	GPIO4-IO03	47k pull-up
S304	GPIO4-IO02	47k pull-up
S303	GPIO4-IO01	47k pull-up
S302 (black, most on the right)	GPIO4-IO00	47k pull-up

System switches

Switch	Signal name	Description
S301 (left, red)	Reset	-
S300 (right, red)	BOOT-RECOVERY	-

User LEDs

LED	GPIO	Description
D303 (most on the left)	GPIO4-IO04	User LED1, buffered with inverter
D302	GPIO4-IO05	User LED2, buffered with inverter
D301	GPIO4-IO06	User LED3, buffered with inverter
D300 (most on the right)	GPIO4-IO07	User LED4, buffered with inverter

System LEDs

LED	GPIO	Description
D304	SYS-LED	System function monitoring
D305	-	Power LED (3.3V)

Dimensions