Personal tools

Difference between revisions of "VisionCB-RT1176-STD v.1.2 Datasheet and Pinout"

From SomLabs Wiki

Jump to: navigation, search
(GPIO COMM1 I/O header (J802))
(GPIO COMM1 I/O header (J802))
Line 275: Line 275:
 
== GPIO COMM1 I/O header (J802) ==
 
== GPIO COMM1 I/O header (J802) ==
 
[[File:VisionCB-RT1176-STD-con-comm1.png|center|600px]]
 
[[File:VisionCB-RT1176-STD-con-comm1.png|center|600px]]
 +
 +
 +
 +
{| class="wikitable"
 +
! style="text-align: center; font-weight: bold;" | J802 Pin
 +
! style="text-align: center; font-weight: bold;" | Default function name
 +
! style="text-align: center; font-weight: bold;" | MCU pin name
 +
! style="text-align: center; font-weight: bold;" | Description
 +
|-
 +
| 1
 +
| SPI4.SCK
 +
| GPIO_DISP_B2_12
 +
| 3.3V logic levels
 +
|-
 +
| 2
 +
| SPI4.OUT
 +
| GPIO_DISP_B2_14
 +
| 3.3V logic levels
 +
|-
 +
| 3
 +
| SPI4.IN
 +
| GPIO_DISP_B2_13
 +
| 3.3V logic levels
 +
|-
 +
| 4
 +
| SPI4.CS0
 +
| GPIO_DISP_B2_15
 +
| 3.3V logic levels
 +
|-
 +
| 5
 +
| I2C1.SDA
 +
| GPIO_AD_33
 +
| External 4,7k pull-up resistor
 +
|-
 +
| 6
 +
| I2C1.SCL
 +
| GPIO_AD_32
 +
| External 4,7k pull-up resistor
 +
|-
 +
| 7
 +
| I2C2.SDA
 +
| GPIO_AD_19
 +
| External 4,7k pull-up resistor
 +
|-
 +
| 8
 +
| I2C2.SCL
 +
| GPIO_AD_18
 +
| External 4,7k pull-up resistor
 +
|-
 +
| 9
 +
| CAN2.TX
 +
| GPIO_AD_00
 +
| 3.3V logic levels
 +
|-
 +
| 10
 +
| CAN2.RX
 +
| GPIO_AD_01
 +
| 3.3V logic levels
 +
|-
 +
| 11
 +
| UART1.RXD
 +
| GPIO_AD_25
 +
| Available to the user as GPIO only in SoM without 1DX radio modules.
 +
|-
 +
| 12
 +
| UART1.TXD
 +
| GPIO_AD_24
 +
| Available to the user as GPIO only in SoM without 1DX radio modules.
 +
|-
 +
| 13
 +
| UART1.CTS
 +
| GPIO_AD_26
 +
| Available to the user as GPIO only in SoM without 1DX radio modules.
 +
|-
 +
| 14
 +
| UART1.RTS
 +
| GPIO_AD_27
 +
| Available to the user as GPIO only in SoM without 1DX radio modules.
 +
|-
 +
| 15
 +
| +3V3
 +
| NA
 +
| -
 +
|-
 +
| 16
 +
| GND
 +
| NA
 +
| -
 +
|}
 +
 +
Notes:<br />
 +
1. NA - not available.<br />
 +
 +
 +
== GPIO COMM2 I/O header (J801) ==
 +
[[File:VisionCB-RT1176-STD-con-comm2.png|center|600px]]
  
  

Revision as of 14:57, 2 July 2024

VisionCB-RT1176-STD v.1.2 Datasheet and Pinout


General description

VisionCB-RT1176-STD.png


VisionCB-RT1176-STD is a carrier board for the VisionSOM-RT1170 family of computer-on-modules, which are powered by NXP i.MX RT117x application processors. The carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as audio codec, USB, Ethernet, UART, RS485, CAN etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.

The carrier board connects with the SoM via a standard SODIMM connector.

Applications

  • Digital cluster
  • Home Control Panel
  • Home Automation – Smart Home
  • Human-machine Interfaces (HMI)
  • Point-of-sales (POS) terminals
  • Motor Drives
  • 2D barcode scanners and printers
  • Smart grid infrastructure
  • IoT gateways
  • Transport ticketing
  • PV Energy Generation
  • Robotic appliance
  • Fitness/outdoor equipment

Features

  • Carrier Board (Base Board) compatible with the VisionSOM family of modules based on NXP i.MX RT117x application processors
  • SoM connector: SODIMM200
  • Expansion Connectors:
    • GPIO-SNVS, GPIO-COMM1, GPIO-COMM2 2x16 Pin Headers (Male)
    • MicroSD socket
  • Audio:
    • 24-bit codec audio with headphones and microphone Jack connector
  • Communication Connectors:
    • 1x JTAG connector
    • RS485 half-duplex
    • CAN single channel
    • 1x Ethernet 10/100/1000 Mbit/s, RJ45
    • 1x USB Host Type A connectors
    • 1x USB-OTG Micro AB connector
    • 1x Console MicroUSB B connector (Mbed SWDAP debug probe based on LPC11U35FHI33/501)
  • Display Interface: 30-pin FFC/FPC MIPI-DSI
  • Camera Interface: 30-pin FFC/FPC MIPI-CSI
  • User Interface:
    • 5 Pushbuttons
    • 5 LEDs
  • Recovery jumper
  • Power Supply
    • DC connector: Input Voltage 9-12V DC (5.5x2.1 connector)
    • CR2032 battery socket for RTC
  • Temperature Range: 0 to +70°C
  • Board Size: 145mm x 90mm x 22mm

Pictures of VisionCB-RT1176-STD v1.2 board

Version Photo
VisionCB-RT1176-STD v1.2 board with attached SOM
VisionCB-RT1176-STD.png

Ordering info

VisionCB-RT1176-STD v1.2

Block Diagram

VisionCB-RT1176-STD-block-diagram.png

Electrical parameters

Parameter Value Units Comment
Min. Typ. Max.
Power Supply (J100 input) 9.0 12.0 15.0 V Positive pole on central connector of J100
Supply current - - 0.15 A Excluding LCD, USB and antoher external loads
Output voltage (VCC-3V3) - 3.3 - V Generated by internal LDO
Output VCC-3V3 current - - 500 mA Generated by internal LDO
USB power supply 4.75 4.9 5.5 V On J201 (Linux USB console connector)
Input GPIO voltage (J405) 0 - 3.3 V LCD-RGB connector
Input GPIO voltage (J504) 0 - 3.3 V Raspberry Pi compatible
Input GPIO voltage (J502, J503) 0 - 3.3/5 (1) V Arduino compatible connector (digital I/O)
Input GPIO voltage (J501) 0 - 3.3 V Arduino compatible connector (analog inputs)

Note:
1. Depends on JP3 selector.

Recovery Jumper/MCU Boot Configuration

VisionCB-RT1176-STD-recovery.png

RECOVERY is the boot mode selector. If:

  • RECOVERY = 0 (jupmer installed) then BOOT-MODE0 = 1, as a result serial loader starts
  • RECOVERY = 1 (jumper is not installed) or open then BOOT-MODE0 = 0, as a result MCU boots from fuses

External JTAG Connector

VisionCB-RT1176-STD-JTAG.png
JTAG Connector Default function name MCU pin name
1 +3V3 -
2 TMS GPIO_LPSR_15
3 GND NA
4 TCK GPIO_LPSR_14
5 GND NA
6 TDO GPIO_LPSR_11
7 - -
8 TDI GPIO_LPSR_12
9 GND GPIO_AD_B0_07
10 nRES/TRST GPIO_LPSR_10

DAP Debug Interface

VisionCB-RT1176-STD-swdap.png

The DAP debug interface is based on LPC11U35FHI33/501 and converts USB into two-lines SWD debug interface.
The DAP debug interface also serves as an vCOM (on USB) interface for optional UART console port.

SWDIO DAP Connector

VisionCB-RT1176-STD-swdap-jtag-conn.png
DAP Connector Function name Source: DAP/SoM
1 nRES DAP
2 nRESET DAP
3 SWCLK DAP
4 TCK SoM
5 SWDIO DAP
6 TMS SoM

Note:
1. During normal use, it is recommended to connect pin pairs: 1-2, 3-4, 5-6.


Console DAP Connector

VisionCB-RT1176-STD-swdap-console-conn.png
DAP Connector Function name Signal Source
1 RxD DAP
2 UART2.RxD SoM
3 TxD DAP
4 UART2.TxD SoM

Note:
1. During normal use, it is recommended to connect pin pairs: 1-2, 3-4.

GPIO COMM1 I/O header (J802)

VisionCB-RT1176-STD-con-comm1.png


J802 Pin Default function name MCU pin name Description
1 SPI4.SCK GPIO_DISP_B2_12 3.3V logic levels
2 SPI4.OUT GPIO_DISP_B2_14 3.3V logic levels
3 SPI4.IN GPIO_DISP_B2_13 3.3V logic levels
4 SPI4.CS0 GPIO_DISP_B2_15 3.3V logic levels
5 I2C1.SDA GPIO_AD_33 External 4,7k pull-up resistor
6 I2C1.SCL GPIO_AD_32 External 4,7k pull-up resistor
7 I2C2.SDA GPIO_AD_19 External 4,7k pull-up resistor
8 I2C2.SCL GPIO_AD_18 External 4,7k pull-up resistor
9 CAN2.TX GPIO_AD_00 3.3V logic levels
10 CAN2.RX GPIO_AD_01 3.3V logic levels
11 UART1.RXD GPIO_AD_25 Available to the user as GPIO only in SoM without 1DX radio modules.
12 UART1.TXD GPIO_AD_24 Available to the user as GPIO only in SoM without 1DX radio modules.
13 UART1.CTS GPIO_AD_26 Available to the user as GPIO only in SoM without 1DX radio modules.
14 UART1.RTS GPIO_AD_27 Available to the user as GPIO only in SoM without 1DX radio modules.
15 +3V3 NA -
16 GND NA -

Notes:
1. NA - not available.


GPIO COMM2 I/O header (J801)

VisionCB-RT1176-STD-con-comm2.png


J802 Pin Default function name MCU pin name Description
1 SPI4.SCK GPIO_DISP_B2_12 3.3V logic levels
2 SPI4.OUT GPIO_DISP_B2_14 3.3V logic levels
3 SPI4.IN GPIO_DISP_B2_13 3.3V logic levels
4 SPI4.CS0 GPIO_DISP_B2_15 3.3V logic levels
5 I2C1.SDA GPIO_AD_33 External 4,7k pull-up resistor
6 I2C1.SCL GPIO_AD_32 External 4,7k pull-up resistor
7 I2C2.SDA GPIO_AD_19 External 4,7k pull-up resistor
8 I2C2.SCL GPIO_AD_18 External 4,7k pull-up resistor
9 CAN2.TX GPIO_AD_00 3.3V logic levels
10 CAN2.RX GPIO_AD_01 3.3V logic levels
11 UART1.RXD GPIO_AD_25 Available to the user as GPIO only in SoM without 1DX radio modules.
12 UART1.TXD GPIO_AD_24 Available to the user as GPIO only in SoM without 1DX radio modules.
13 UART1.CTS GPIO_AD_26 Available to the user as GPIO only in SoM without 1DX radio modules.
14 UART1.RTS GPIO_AD_27 Available to the user as GPIO only in SoM without 1DX radio modules.
15 +3V3 NA -
16 GND NA -

Notes:
1. NA - not available.

Arduino compatible I/O headers (J500-J503)

VisionCB-RT-STD-1-0-arduino.png


Pin Arduino name Default function name MCU pin name Description
Power connector J500, red connector
1 - - - -
2 IOREF VCC-3V3 - +3.3V generated by internal SOM LDO converter (load current limited to 500 mA).
3 RESET POR-B POR-B External reset input, active L.
4 3.3V VCC-3V3 - Reference voltage +3.3V generated by internal SOM LDO converter (load current limited to 500 mA).
5 5V VCC-5V0 - Reference voltage +5V generated by carrier board built-in DC/DC converter.
6 GND GND - -
7 GND GND - -
8 VIN VCC-3V3 - +3.3V generated by internal SOM LDO converter (load current limited to 500 mA).
Analog inputs connector J501, blue connector
1 AIN0 GPIO-0 GPIO_AD_B0_00 Analog input or universal GPIO with 3.3V logic levels (added 1k resistor in series and 3.3V voltage limiter).
2 AIN1 GPIO-5 GPIO_AD_B1_11 Analog input or universal GPIO with 3.3V logic levels (added 1k resistor in series and 3.3V voltage limiter).
3 AIN2 GPIO8 GPIO_AD_B1_09 Analog input or universal GPIO with 3.3V logic levels (added 1k resistor in series and 3.3V voltage limiter).
4 AIN3 GPIO9 GPIO_B1_14 Analog input or universal GPIO with 3.3V logic levels (added 1k resistor in series and 3.3V voltage limiter).
5 - - - -
6 - - - -
Digital I/Os connector J503, yellow connector
1 DIO0 UART4-RXD NC(1) -
2 DIO1 UART4-TXD NC(1) -
3 DIO2 UART3-RTS GPIO_AD_B1_05 Default: UART3 RTS line or universal GPIO with 5V logic levels.
4 DIO3 UART3-CTS GPIO_AD_B1_04 Default: UART3 CTS line or universal GPIO with 5V logic levels.
5 DIO4 ENET2_RXER NC(1) -
6 DIO5 ENET2_TX_CLK NC(1) -
7 DIO6 UART1-RTS GPIO_AD_B0_15 Default: UART1 RTS line or universal GPIO with 5V logic levels.
8 DIO7 UART1-CTS GPIO_AD_B0_14 Default: UART1 CTS line or universal GPIO with 5V logic levels.
Digital I/Os connector J502, yellow connector
1 DIO8 ENET2_TXD0 GPIO_B1_15 Default: ENET2 TXD0 line or universal GPIO with 5V logic levels.
2 DIO9 ENET2_CRS_DV GPIO_AD_B1_15 Default: ENET2 CRS DV line or universal GPIO with 5V logic levels.
3 DIO10 UART2-TXD GPIO_AD_B1_02 Default: UART2 TXD line or universal GPIO with 5V logic levels.
4 DIO11 UART2-CTS GPIO_AD_B1_00 Default: UART2 CTS line or universal GPIO with 5V logic levels.
5 DIO12 UART2-RTS GPIO_AD_B1_01 Default: UART2 RTS line or universal GPIO with 5V logic levels.
6 DIO13 UART2-RXD GPIO_AD_B1_03 Default: UART2 RXD line or universal GPIO with 5V logic levels.
7 GND GND -
8 AREF VCC-3V3 +3.3V generated by internal SOM LDO converter (load current limited to 500 mA).
9 DIO14-SCL UART5-RXD GPIO_B1_13 Default: UART5 RXD line or universal GPIO with 5V logic levels.
10 DIO15-SDA UART5-TXD GPIO_B1_12 Default: UART5 TXD line or universal GPIO with 5V logic levels.

Notes:
1. Depends on MCU type. 2. All digital I/O lines are 5V compatible.
3. RESET line is 5V compatible.
4. Preferred voltage range on AIN0…AIN3 lines is 0…+3.3V.
5. Voltage level compatibility can be changed to +3.3V by JP3 selector, but voltage range on AIN0…AIN3 lines must be 0…+3.3V.

User LEDs connections

VisionCB-RT-STD-1-0-led.png


LED PCB designation MCU pin name Description
D400/blue GPIO10 GPIO_AD_B0_08 Default: JTAG MOD input or universal GPIO with 3.3V logic levels.
D401/green GPIO11 GPIO_AD_B0_06 Default: JTAG TMS input or universal GPIO with 3.3V logic levels.
D403/yellow GPIO12 GPIO_AD_B0_10 Default: JTAG TDO input or universal GPIO with 3.3V logic levels.
D402/red GPIO13 GPIO_AD_B0_09 Default: JTAG TDI input or universal GPIO with 3.3V logic levels.

Notes:
1. LEDs are switched on by logic „1” set at the GPIO outputs.
2. LEDs are controlled by current drivers and do not load the GPIOs.

User switches connections

VisionCB-RT-STD-1-0-switche.png


Switch PCB designation MCU pin name Description
S402 GPIO3 GPIO_AD_B0_03 Universal GPIO with 3.3V logic levels.
S403 GPIO4 GPIO_AD_B0_04/BOOT0 Universal GPIO with 3.3V logic levels.
S404 GPIO8 GPIO_AD_B1_09 Universal GPIO with 3.3V logic levels.
S405 GPIO9 GPIO_B1_14 Universal GPIO with 3.3V logic levels.

Notes:
1. After button pressing on GPIO lines are set to „0”.
2. GPIO lines connected to switches are separated from board’s environment by 1k resistors.

TFT LCD connector (RGB 24b, J405)

VisionCB-RT-STD-1-0-lcd.png


J405 pin Default function name MCU pin name LCD interface name
1 LCD-DATA0 Internally connected to GND LCD-B0
2 LCD-DATA1 Internally connected to GND LCD-B1
3 LCD-DATA2 Internally connected to GND LCD-B2
4 LCD-DATA3 GPIO_B0_04 LCD-B3
5 LCD-DATA4 GPIO_B0_05 LCD-B4
6 LCD-DATA5 GPIO_B0_06 LCD-B5
7 LCD-DATA6 GPIO_B0_07 LCD-B6
8 LCD-DATA7 GPIO_B0_08 LCD-B7
9 GND - GND
10 LCD-DATA8 Internally connected to GND LCD-G0
11 LCD-DATA9 Internally connected to GND LCD-G1
12 LCD-DATA10 GPIO_B0_09 LCD-G2
13 LCD-DATA11 GPIO_B0_10 LCD-G3
14 LCD-DATA12 GPIO_B0_11 LCD-G4
15 LCD-DATA13 GPIO_B0_12 LCD-G5
16 LCD-DATA14 GPIO_B0_13 LCD-G6
17 LCD-DATA15 GPIO_B0_14 LCD-G7
18 GND - GND
19 LCD-DATA16 Internally connected to GND LCD-R0
20 LCD-DATA17 Internally connected to GND LCD-R1
21 LCD-DATA18 Internally connected to GND LCD-R2
22 LCD-DATA19 GPIO_B0_15 LCD-R3
23 LCD-DATA20 GPIO_B1_00 LCD-R4
24 LCD-DATA21 GPIO_B1_01 LCD-R5
25 LCD-DATA22 GPIO_B1_02 LCD-R6
26 LCD-DATA23 GPIO_B1_03 LCD-R7
27 GND - GND
28 LCD-DE GPIO_B0_01 DE
29 LCD-HSYNC GPIO_B0_02 HSYNC
30 LCD-VSYNC GPIO_B0_03 VSYNC
31 GND - GND
32 LCD-PCLK GPIO_B0_00 DCLK
33 GND - GND
34 GPIO4 GPIO_AD_B0_04 TS-YPUL
35 GPIO3 GPIO_AD_B0_03 TS-YNUR
36 GPIO2 GPIO_AD_B0_02 TS-YPLL
37 GPIO1 GPIO_AD_B0_00 TS-YNLR
38 - - -
39 - - -
40 - - -
41 - - -
42 UART5-TXD GPIO_B1_12 I2C-SCL
43 UART5-RXD GPIO_B1_13 I2C-SDA
44 GND - GND
45 VCC-LCD - +3.3V (controlled by GPIO_AD_B0_11/JTAG-TRSTB)
46 VCC-LCD - +3.3V (controlled by GPIO_AD_B0_11/JTAG-TRSTB)
47 VCC-5V0 - +5.0V
48 VCC-5V0 - +5.0V
49 LCD-RESET GPIO_AD_B1_08 RESET
50 JTAG-nTRST GPIO_AD_B0_11 PWREN

Note:
1. When GPIO_AD_B0_11/JTAG-TRSTB:
= '1' LCD module power supply is OFF.
= '0' LCD module power supply is ON.

Dimensions

VisionCB-RT-STD-1-0-PCB-size.png
NXP Partner ST Partner Renesas Partner