VisionSOM-RT Datasheet and Pinout
From SomLabs Wiki
VisionSOM-RT Datasheet and Pinout
General description
The VisionSOM-RT family is a SODIMM-sized SoM based on the NXP i.MX RT application processor which features an advanced implementation of a single ARM Cortex-M7 core (at speeds up to 600MHz).
The VisionSOM-RT is a low power highly integrated SoM (System-on-Module) featuring high computation performance, real-time functionality and MCU usability. High security enabled by AES-128, HAB and On-the-fly QSPI Flash Decryption together with 2D graphical acceleration make an ideally suited solution for home and industrial control systems, wireless application, communication solutions and real-time systems.
The system supports industrial grade targeting embedded application.
SOMLabs also provides a complete hardware and software development board for the SoM in the form of a carrier board and optional TFT display and touch panel.
Applications
- Industrial embedded Linux computer
- Home Appliances
- Home Automation – Smart Home
- Human-machine Interfaces (HMI)
- Point-of-sales (POS) terminals
- Cash Register
- 2D barcode scanners and printers
- Smart grid Infrastructure
- IoT gateways
- Residential getaways
- Machine vision equipment
- Robotics
- Fitness/outdoor equipment
Features
- Powered by NXP i.MX RT application processor
- Core clock up to 600MHz
- 512kB on-chip RAM memory
- 256Mb (32MB) SDRAM memory
- 128Mb (16MB) QuadSPI Flash memory
- Power-efficient and cost-optimized solution
- Ideal for industrial IoT and embedded applications
- FreeRTOS support
Pictures of SOM versions
| Version | Photo |
|---|---|
| RAM&QSPI |
 |
| QSPI |
 |
Ordering info
| SLS | Product type SLS - System on Module |
| N | SOM Name 1 - VisionSOM SODIMM200 |
| 2 | CPU Family 2 - i.MX RT |
| CpuType | CPU Type RT52 - i.MX RT 1052 RT62 - i.MX RT 1062 |
| Clock | CPU Clock Speed 528C - 528MHz |
| RamSize | RAM Size 0R - No RAM 32R - 32MB |
| FlashSize | Flash Size Type and Density 4QSPI - 4MB QSPI Flash 16QSPI - 16MB QSPI Flash |
| SF | Special Features 0SF - No Special Features |
| TEMP | Operating Temperature C - Consumer: 0 to +70 C I - Industrial: -40 to +85 C |
| V | SOM Version A - Version 1.2 |
Block Diagram
Operating ranges
| Parameter | Value | Unit | Comment |
|---|---|---|---|
| Power Supply | Connected to +5VIN SODIMM pin | ||
| Input GPIO voltage | - | ||
| Environment temperature1 | oC | Industrial range | |
| Consumer range |
Note:
1. Maximum MPU junction temperature is +105oC (industrial version) or +95oC (consumer version).
Electrical parameters
| SOM signal name |
Parameter | Value | Units | ||
|---|---|---|---|---|---|
| Min. | Typ. | Max. | |||
| +5VIN | Supply Voltage | 4.0 | 5.0 | 5.5 | V |
| - | Total Supply Current1 | x | x | x | A |
| VGPIO | GPIO Input Voltage | 0 | 3.3 | 3.62 | V |
| +3.3VOUT | SOM Internal LDO Output Current |
- | - | 0.5 | A |
| USB-OTGx-VBUS | USB Supply | 4.40 | - | 5.5 | V |
| VDD-COIN-3V | SNVS Backup Battery Supply |
2.66 | - | 3.6 | V |
| - | ADC Inputs Voltage | 0 | - | 3.3 | V |
Notes:
1. Excluding external load connected to +3.3VOUT lines.
2. Applying the maximum voltage 3.6V results in shorten lifetime. Recommended value is smaller than 3.5V.
Pinout
| SODIMM pin | Functional
domain |
Function name | i.MX-RT pad name | Description (refer to i.MX-RTmanuals for details)
} Dimensions |
|---|
