VisionCB-STM32MP1-STD
From SomLabs Wiki
| VisionCB-STM32MP1-STD |
|
VisionCB-STM32MP1-STD is a carrier board for the VisionSOM-STM32MP1 family of computer-on-modules which are powered by STMicroelectronics SOC (dual core ARM Cortex-M7 + single Cortex-M4). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product. |
Documentation
| Specifications |
| SOM compatibility | VisionSOM-STM32P1 module with STMicroelectronics STM32MP15x processor |
| SOM socket | SODIMM200 |
| Display connector | 24-bit RGB parallel interface (FPC50) 1 lane MIPI-DSI interface (FPC30) |
| Network | 1x Ethernet 10/100Mbit/s, RJ45 |
| USB | USB 2.0 host x1 USB-OTH 2.0 x1 |
| Debugger | Built-in ST-Link/v2-1 compatible (SWD) |
| Console interface | USB/UART |
| Switches | 2+1 (reset) |
| LEDs | 3+2 (3.3 and 5V power) |
| Connectors | Raspberry Pi compatible (40 pins, 2,54mm) Universal GPIO header (40 pins, 2,54mm) MicroSD socket |
| RTC Backup | Battery CR1220 socket |
| Power supply | External 9-12V DC |
| Temperature Range | 0 to +70°C |
| Dimensions | 160mm x 100mm x 17mm |
