SpaceCB-8Mplus-ADV

SpaceCB-8Mplus-ADV

SpaceCB-8Mplus-ADV is a carrier board for the SpaceSOM-8Mplus family of computer-on-modules which are powered by NXP SOC iMX8Mplus (quad core ARM Cortex-A53 + single Cortex-M4 + Neural Processing Unit). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, PCIe, HDMI, MIPI-DSI, LVDS, CAN, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product. The carrier board connects with the SoM via a standard SODIMM connector. SpaceCB-8Mplus-ADV carrier board is equipped with HDMI/LVDS and MIPI-DSI video outputs, 24-bit audio codec, PCIe (M.2 key M) socket (2242, 2260, 2280), RS-485 and CAN-FD interfaces. SpaceCB-8Mplus-ADV carrier board is equipped with Segger J-Link debugger and Linux serial console port on USB vCOM.

Documentation

• SpaceCB-8Mplus-ADV Datasheet and Pinout
• SpaceCB-8Mplus-ADV - STEP
• SpaceCB-8Mplus-ADV - Schematic

Specifications

SOM compatibility	SpaceSOM-8Mplus module with quad core NXP iMX8Mplus processor (4 x Cortex-A53 + Cortex-M7)
SOM socket	SODIMM260
Display connector	up to 8 lanes LVDS (FPC30) HDMI up to 4 lanes MIPI-DSI interface (FPC30)
Network	2x Ethernet 10/100/1000Mbit/s, RJ45
USB	USB 3.0 x1 USB-C x1
Console interface	USB/UART
Switches	4/1 (user/system)
LEDs	4/3/1 (user/system/diagnostic)
Connectors	GPIOs (goldpin 2x20) 2x CAN-FD (2x goldpin 1x3) 1x RS485 (goldpin 1x3) PCIe key M 2x MIPI-CSI2
Power supply	External 9-12V DC
Temperature Range	-40 to +85°C
Dimensions	130mm x 90mm x 20mm