VisionCB-RT-STD

VisionCB-RT-STD

VisionCB-RT-STD is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX RT application processors (ARM Cortex-M7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, UART, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.

Documentation

• VisionCB-RT-STD v.1.0 Datasheet and Pinout
• VisionCB-RT-STD - Datasheet
• VisionCB-RT-STD - Wiki Page for CB (Additional Resources)
• VisionCB-RT-STD - STEP
• VisionCB-RT-STD - Schematic

Specifications

CPU	VisionSOM-RT - System on Module with NXP i.MX RT application procesor
Memory	on-chip 512kB RAM (depends on used VisionSOM) or 32MB SDRAM
Display	24-bit RGB parallel interface
Camera	up to 24-bit CSI interface
Storage	4 or 16MB QSPI Flash (depends on used VisionSOM)
Network	1x Ethernet 10/100Mbit/s, RJ45
USB	USB2.0 Host
Temperature Range	0 to +70°C
Dimensions	145mm x 90mm x 17mm