Personal tools

Installing OpenSTLinux on VisionSOM-STM32MP1 with SD card

From SomLabs Wiki

Revision as of 15:33, 20 November 2020 by KrzysztofChojnowski (talk | contribs) (Created page with "{{PageHeader|Installing OpenSTLinux on VisionSOM-STM32MP1 with SD card}} The built system image file can be written to the SD card using the following command: <pre> sudo dd...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Installing OpenSTLinux on VisionSOM-STM32MP1 with SD card

The built system image file can be written to the SD card using the following command: 

sudo dd if=<image .raw file> of=/dev/sdX bs=1M

In order to run the images from SD card the main board jumpers shall be set as follows (BOOT[0:2] = 101):

Retrieved from "https://wiki.somlabs.com/index.php?title=Installing_OpenSTLinux_on_VisionSOM-STM32MP1_with_SD_card&oldid=2294"