VisionCB-STD

VisionCB-STD

VisionCB-STD

VisionCB-STD is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX 6UL or i.MX 6ULL application processors (ARM Cortex-A7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, UART, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.

Documentation

• Datasheet and Pinout
• VisionCB-6ULL-STD v. 2.0 - Datasheet
• VisionCB-6ULL-STD v. 2.0 - Wiki Page for CB (Additional Resources)
• VisionCB-6ULL-STD v. 2.0 - STEP
• VisionCB-6ULL-STD v. 2.0 - Schematic

Specifications

CPU	VisionSOM-6UL - System on Module with NXP i.MX6UL application procesor or VisionSOM-6ULL - System on Module with NXP i.MX6ULL application procesor
Memory	up to 512MB DDR3L (depends on used VisionSOM)
Display	24-bit RGB parallel interface
Camera	up to 24-bit CSI interface
Storage	uSD card or up to 32GB eMMC or up to 512MB NAND Flash (depends on used VisionSOM)
Network	1x Ethernet 10/100Mbit/s, RJ45 Wi-Fi 802.11b/g/n (depends on used VisionSOM)
USB	2x USB2.0 OTG Host/Device
Temperature Range	0 to +70°C
Dimensions	130mm x 90mm x 17mm