VisionCB-6ULL-STD

VisionCB-6ULL-STD

VisionCB-6ULL-STD is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX 6UL or i.MX 6ULL application processors (ARM Cortex-A7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, UART, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.

Documentation

• VisionCB-6ULL-STD v.2.0 Datasheet and Pinout
• VisionCB-6ULL-STD v. 2.0 - Datasheet
• VisionCB-6ULL-STD v. 2.0 - Wiki Page for CB (Additional Resources)
• VisionCB-6ULL-STD v. 2.0 - STEP
• VisionCB-6ULL-STD v. 2.0 - Schematic

How to

• VisionCB-STD Power Supply
• VisionSOM-6ULL - USB recovery mode

Specifications

SOM compatibility	VisionSOM-6UL and VisionSOM-6ULL module with NXP i.MX6ULL processor
SOM socket	SODIMM200
Display connector	24-bit RGB parallel interface (FPC50)
Network	1x Ethernet 10/100Mbit/s, RJ45
USB	USB 2.0 host x1, USB-OTG 2.0 x1
Debugger	JTAG connector for external debugger
Console interface	USB/UART
Switches	4+1 (reset)
LEDs	4 + 1 (power)
Connectors	Raspberry Pi compatible (40 pins, 2,54mm), Aruduiono Rev3
RTC Backup	none
Power supply	External 9-12V DC
Temperature Range	0 to +70°C
Dimensions	130mm x 90mm x 17mm