VisionCB-RT-STD

VisionCB-RT-STD

VisionCB-RT-STD is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX RT application processors (ARM Cortex-M7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, UART, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.

Documentation

• VisionCB-RT-STD v.1.0 Datasheet and Pinout
• VisionCB-RT-STD - Datasheet
• VisionCB-RT-STD - Wiki Page for CB (Additional Resources)
• VisionCB-RT-STD - STEP
• VisionCB-RT-STD - Schematic

Specifications

SOM compatibility	VisionSOM-RT module with NXP i.MX-RT microcontroller
SOM socket	SODIMM200
Display connector	24-bit RGB parallel interface (FPC50)
Network	1x Ethernet 10/100Mbit/s, RJ45
USB	USB 2.0 host x1, USB-OTG 2.0 x1
Debugger	JTAG connector for external debugger
Console interface	USB/UART
Switches	4+1 (reset)
LEDs	4 + 1 (power)
Connectors	Raspberry Pi compatible (40 pins, 2,54mm), Arduino Rev3
RTC Backup	none
Power supply	External 9-12V DC
Dimensions	145mm x 90mm x 17mm