VisionSOM-6UL Datasheet and Pinout
From SomLabs Wiki
VisionSOM-6UL Datasheet and Pinout
General description
The VisionSOM-6UL family is a SODIMM-sized SoM based on the NXP i.MX6 UL application processor which features an advanced implementation of a single ARM Cortex-A7 core (at speeds up to 696MHz).
The VisionSOM-6UL is a low power highly integrated SoM (System on Module) featuring high computation power and 802.11b/g/n Wi-Fi and Bluetooth v5.2 connectivity. The option of integrated, fULy certified Wi-Fi and Bluetooth module simplifies the carrier board design and is ideally suited for wireless application. The VisionSOM-6UL provides a variety memory configuration including flexible range of DDR3L, NAND, eMMC and SD memory card that meets our customers requirements.
The SoM supports connections to a variety of interfaces: two high-speed USB on-the-go with PHY, dual Ethernet, audio, display with touch panel and serial interfaces. In addition, the system supports industrial grade targeting embedded application.
SOMLabs also provides a complete hardware and software development board for the SoM in the form of a carrier board and optional TFT display and touch panel.
Applications
- Industrial embedded Linux computer
- Home Appliances
- Home Automation – Smart Home
- Human-machine Interfaces (HMI)
- Point-of-sales (POS) terminals
- Cash Register
- 2D barcode scanners and printers
- Smart grid Infrastructure
- IoT gateways
- Residential getaways
- Machine vision equipment
- Robotics
- Fitness/outdoor equipment
Features
- Powered by NXP i.MX 6UL application processor
- Core clock up to 696MHz
- Up to 512MB SDRAM DDR3L
- Up to 512MB NAND Flash / 32GB eMMC / uSD memory card
- Optional Murata 802.11b/g/n Wi-Fi and Bluetooth v5.2 module
- Power-efficient and cost-optimized solution
- Ideal for industrial IoT and embedded applications
- Integrated security features
Pictures of SOM versions
Version | Photo |
---|---|
eMMC | |
micro-SD | |
NAND Flash |
Wi-Fi is available for all memory variants configurations. |
Ordering info
SLS | Product type SLS - System on Module |
N | SOM Name 1 - VisionSOM SODIMM200 |
6 | CPU Family 6 - i.MX6 |
CpuType | CPU Type G0 - i.MX6 UL G0 G1 - i.MX6 UL G1 G2 - i.MX6 UL G2 G3 - i.MX6 UL G3 |
Clock | CPU Clock Speed 528C - 528MHz 696C - 696MHz |
RamSize | DDR3 RAM Size 64R - 64MB 128R - 128MB 256R - 256MB 512R - 512MB |
FlashSize | Flash Size Type and Density SD - MicroSD connector 128N - 128MB NAND 256N - 256MB NAND 512N - 512MB NAND 04GE - 4GB eMMC 08GE - 8GB eMMC 16GE - 16GB eMMC 32GE - 32GB eMMC |
SF | Special Features 0SF - No Special Features 1WB - Built-in 802.11b/g/n Wi-Fi and Bluetooth v5.2 Module |
TEMP | Operating Temperature C - Consumer: 0 to +70 C SI - Industrial with Wi-Fi: -30 to +70 C I - Industrial: -40 to +85 C |
V | SOM Version A - Version 1.0 |
Block Diagram
Operating ranges
Parameter | Value | Unit | Comment |
---|---|---|---|
Power Supply | Connected to +5VIN SODIMM pin | ||
Input GPIO voltage | - | ||
Environment temperature1 | oC | Industrial range w/o WiFi module | |
Industrial range with WiFi module | |||
Consumer range |
Note:
1. Maximum MPU junction temperature is +105oC (industrial version) or +95oC (consumer version).
Electrical parameters
SOM signal name |
Parameter | Value | Units | ||
---|---|---|---|---|---|
Min. | Typ. | Max. | |||
+5VIN | Supply Voltage | 4.0 | 5.0 | 5.5 | V |
- | Total Supply Current1 | x | x | x | A |
VGPIO | GPIO Input Voltage | 0 | 3.3 | 3.62 | V |
+3.3VOUT | SOM Internal LDO Output Current |
- | - | 0.5 | A |
USB-OTGx-VBUS | USB Supply | 4.40 | - | 5.5 | V |
VDD-COIN-3V | SNVS Backup Battery Supply |
2.66 | - | 3.6 | V |
- | ADC Inputs Voltage | 0 | - | 3.3 | V |
Notes:
1. Excluding external load connected to +3.3VOUT lines.
2. Applying the maximum voltage 3.6V results in shorten lifetime. Recommended value is smaller than 3.5V.
SODIMM pinout
SODIMM PIN |
Functional domain |
Function name |
i.MX6 UltraLite/UL Pad Name |
Alternate functions |
Description (refer to i.MX6 UltraLite/UL manuals for details) |
---|---|---|---|---|---|
1 | Power | GND | - | - | - |
2 | Power | GND | - | - | - |
3 | Ctrl | PMIC-STBY-REQ | CCM_PMIC_STBY_REQ | - | Output, leave open if not used. |
4 | Ctrl | MX6-POR-B | - | - | External warm reset input, active L. |
5 | Ctrl | PMIC-ON-REQ | SNVS_PMIC_ON_REQ | - | Output, leave open if not used. |
6 | Power | VDD-SNVS-3V3 | VDD_SNVS_IN | - | SNVS backup power supply must be held between 2.9V and 3.3V if the system requires keeping real time and other data on OFF state. Internally connected to +3.3V, leave open. |
7 | BOOT | BOOT-MODE1 | BOOT_MODE1 | GPIO5_IO11 | BOOT-MODE1 BOOT-MODE0 00 boot from fuses (default) |
8 | Power | VDD-COIN-3V | VDD_SNVS_IN | - | Optional external coin battery for SNVS power domain, must be held between 2.9V and 3.3V if the system requires keeping real time and other data on OFF state. Leave open if not used. |
9 | BOOT | BOOT-MODE0 | BOOT_MODE0 | GPIO5_IO10 | BOOT-MODE1 BOOT-MODE0 00 boot from fuses (default) |
10 | GPIO-SNVS | SNVS-TAMPER9 | SNVS_TAMPER9 | GPIO5_IO09 | Tamper input (SNVS power domain) or GPIO 3.3V. |
11 | USB | USB-OTG2-VBUS | USB_OTG2_VBUS | - | +5V USB bus. Leave open if not used. |
12 | GPIO-SNVS | SNVS-TAMPER5 | SNVS_TAMPER5 | GPIO5_IO05 | Tamper input (SNVS power domain) or GPIO 3.3V. |
13 | USB | USB-OTG1-VBUS | USB_OTG1_VBUS | - | +5V USB bus. Leave open if not used. |
14 | Ctrl | ONOFF | SRC_RESET_B | Input for power interrupt generation. Leave open if not used. | |
15 | Power | GND | - | - | - |
16 | Ctrl | POR-B | POR_B | - | Cold reset negative logic input resets all modules and logic in the IC. May be used in addition to internally generated power on |
17 | Power | GND | - | - | - |
18 | GPIO-SNVS | SNVS-TAMPER8 | SNVS_TAMPER8 | GPIO5_IO08 | Tamper input (SNVS power domain) or GPIO 3.3V. |
19 | USB | USB-OTG2-DP | USB_OTG2_DP | - | Leave open if not used. |
20 | Power | GND | - | - | - |
21 | USB | USB-OTG2-DN | USB_OTG2_DN | - | Leave open if not used. |
22 | Power | GND | - | - | - |
23 | Power | GND | - | - | - |
24 | GPIO-SNVS | SNVS-TAMPER7 | SNVS_TAMPER7 | GPIO5_IO07 | Tamper input (SNVS power domain) or GPIO 3.3V. |
25 | USB | USB-OTG1-DP | USB_OTG1_DP | - | Leave open if not used. |
26 | Power | GND | - | - | - |
27 | USB | USB-OTG1-DN | USB_OTG1_DN | - | Leave open if not used. |
28 | Power | GND | - | - | - |
29 | Power | GND | - | - | - |
30 | GPIO-SNVS | SNVS-TAMPER4 | SNVS_TAMPER4 | GPIO5_IO04 | Tamper input (SNVS power domain) or GPIO 3.3V. |
31 | USB | nUSB-OTG-CHD | USB_OTG1_CHD_B | - | Leave open if not used. |
32 | GPIO-SNVS | SNVS-TAMPER1 | SNVS_TAMPER1 | GPIO5_IO01 | Tamper input (SNVS power domain) or GPIO 3.3V. |
33 | JTAG | JTAG-MOD | JTAG_MOD | - | Default: JTAG MOD input or universal GPIO with 3.3V logic levels. Leave open if not used. |
34 | GPIO-SNVS | SNVS-TAMPER3 | SNVS_TAMPER3 | GPIO5_IO03 | Tamper input (SNVS power domain) or GPIO 3.3V. |
35 | Power | GND | - | - | - |
36 | GPIO-SNVS | SNVS-TAMPER0 | SNVS_TAMPER0 | GPIO5_IO00 | Tamper input (SNVS power domain) or GPIO 3.3V. |
37 | CLK1-N | CCM_CLK1_N | - | General purpose differential high speed clock input/output. Leave open if not used. | |
38 | Power | GND | - | - | - |
39 | CLK1-P | CCM_CLK1_P | - | General purpose differential high speed clock input/output. Leave open if not used. | |
40 | Power | GND | - | - | - |
41 | Power | GND | - | - | - |
42 | GPIO-SNVS | SNVS-TAMPER6 | SNVS_TAMPER6 | GPIO5_IO06 | Tamper input (SNVS power domain) or GPIO 3.3V. |
43 | JTAG | JTAG-TDI | JTAG_TDI | - | Default: JTAG TDI input or universal GPIO with 3.3V logic levels. |
44 | GPIO-SNVS | SNVS-TAMPER2 | SNVS_TAMPER2 | GPIO5_IO02 | Tamper input (SNVS power domain) or GPIO 3.3V. |
45 | GPIO | GPIO-8 | GPIO1_IO08 | PWM1_OUT WDOG1_WDOG_B |
Universal GPIO with 3.3V logic levels. |
46 | JTAG | JTAG-TMS | JTAG_TMS | - | Default: JTAG TMS output or universal GPIO with 3.3V logic levels. |
47 | GPIO | GPIO-4 | GPIO1_IO04 | ENET1_REF_CLK1 PWM3_OUT |
Universal GPIO with 3.3V logic levels. |
48 | JTAG | JTAG-nTRST | JTAG_TRST_B | - | JTAG TRST input line (active L). |
49 | GPIO | GPIO-5 | GPIO1_IO05 | ENET2_REF_CLK2 PWM4_OUT |
Universal GPIO with 3.3V logic levels. |
50 | Power | GND | - | - | - |
51 | Power | GND | - | - | - |
52 | JTAG | JTAG-TDO | JTAG_TDO | - | Default: JTAG TDO output or universal GPIO with 3.3V logic levels. |
53 | GPIO | GPIO-7 | GPIO1_IO07 | NET1_MDC ENET2_MDC |
Universal GPIO with 3.3V logic levels. |
54 | JTAG | JTAG-TCK | JTAG_TCK | - | Default: JTAG TCK input or universal GPIO with 3.3V logic levels. |
55 | GPIO | GPIO-3 | GPIO1_IO03 | I2C1_SDA GPT1_COMPARE3 |
Universal GPIO with 3.3V logic levels. |
56 | GPIO | GPIO-9 | GPIO1_IO09 | PWM2_OUT WDOG1_WDOG_ANY |
Universal GPIO with 3.3V logic levels. |
57 | COM-GPIO | UART1-TXD | UART1_TX_DATA | ENET1_RDATA02 I2C3_SCL |
Default: UART1 TxD output or universal GPIO with 3.3V logic levels. |
58 | GPIO | GPIO-2 | GPIO1_IO02 | I2C1_SCL GPT1_COMPARE2 |
Universal GPIO with 3.3V logic levels. |
59 | Power | GND | - | - | - |
60 | Power | GND | - | - | - |
61 | GPIO | GPIO-6 | GPIO1_IO06 | ENET1_MDIO ENET2_MDIO |
Universal GPIO with 3.3V logic levels. |
62 | GPIO | GPIO-1 | GPIO1_IO01 | I2C2_SDA GPT1_COMPARE1 |
Universal GPIO with 3.3V logic levels. |
63 | COM-GPIO | UART1-RXD | UART1_RX_DATA | ENET1_RDATA03 I2C3_SDA |
Default: UART1 RxD input or universal GPIO with 3.3V logic levels. |
64 | GPIO | GPIO-0 | GPIO1_IO00 | I2C2_SCL GPT1_CAPTURE1 |
Universal GPIO with 3.3V logic levels. |
65 | COM-GPIO | UART2-TXD | UART2_TX_DATA | ENET1_TDATA02 I2C4_SCL |
Default: UART2 TxD output or universal GPIO with 3.3V logic levels. |
66 | COM-GPIO | UART1-CTS | UART1_CTS_B | ENET1_RX_CLK USDHC1_WP |
Default: UART1 CTS output or universal GPIO with 3.3V logic levels. |
67 | COM-GPIO | UART2-RXD | UART2_RX_DATA | ENET1_TDATA03 I2C4_SDA |
Default: UART2 RxD input or universal GPIO with 3.3V logic levels. |
68 | COM-GPIO | UART5-RXD | UART5_RX_DATA | ENET2_COL I2C2_SDA |
Default: UART5 RxD input or universal GPIO with 3.3V logic levels. |
69 | COM-GPIO | UART3-TXD | UART3_TX_DATA | ENET2_RDATA02 CSI_DATA01 |
Default: UART3 TxD input or universal GPIO with 3.3V logic levels. |
70 | Power | GND | - | - | - |
71 | Power | GND | - | - | - |
72 | COM-GPIO | UART2-CTS | UART2_CTS_B | ENET1_CRS FLEXCAN2_TX |
Default: UART2 CTS output or universal GPIO with 3.3V logic levels. |
73 | COM-GPIO | UART3-RXD | UART3_RX_DATA | ENET2_RDATA03 CSI_DATA00 |
Default: UART3 RxD input or universal GPIO with 3.3V logic levels. |
74 | COM-GPIO | UART1-RTS | UART1_RTS_B | ENET1_TX_ER USDHC1_CD_B |
Default: UART1 RTS input or universal GPIO with 3.3V logic levels. |
75 | COM-GPIO | UART4-TXD | UART4_TX_DATA | ENET2_TDATA02 I2C1_SCL |
Default: UART4 TxD output or universal GPIO with 3.3V logic levels. |
76 | COM-GPIO | UART3-CTS | UART3_CTS_B | ENET2_RX_CLK FLEXCAN1_TX |
Default: UART3 CTS output or universal GPIO with 3.3V logic levels. |
77 | COM-GPIO | UART4-RXD | UART4_RX_DATA | ENET2_TDATA03 I2C1_SDA |
Default: UART4 RxD input or universal GPIO with 3.3V logic levels. |
78 | COM-GPIO | UART2-RTS | UART2_RTS_B | ENET1_COL FLEXCAN2_RX |
Default: UART2 RTS input or universal GPIO with 3.3V logic levels. |
79 | COM-GPIO | UART5-TXD | UART5_TX_DATA | GPIO1_IO30 ECSPI2_MOSI |
Default: UART5 TxD output or universal GPIO with 3.3V logic levels. |
80 | COM-GPIO | UART3-RTS | UART3_RTS_B | ENET2_TX_ER FLEXCAN1_RX |
Default: UART3 RTS input or universal GPIO with 3.3V logic levels. |
81 | Power | GND | - | - | - |
82 | Power | GND | - | - | - |
83 | NC | - | - | - | - |
84 | Power | GND | - | - | - |
85 | Power | +3.3VOUT | - | - | +3.3V generated by SOM's LDO. |
86 | NC | - | - | - | - |
87 | Power | +3.3VOUT | - | - | +3.3V generated by SOM's LDO. |
88 | Power | +3.3VOUT | - | - | +3.3V generated by SOM's LDO. |
89 | Power | +3.3VOUT | - | - | +3.3V generated by SOM's LDO. |
90 | Power | +3.3VOUT | - | - | +3.3V generated by SOM's LDO. |
91 | Power | +3.3VOUT | - | - | +3.3V generated by SOM's LDO. |
92 | Power | +3.3VOUT | - | - | +3.3V generated by SOM's LDO. |
93 | Power | +3.3VOUT | - | - | +3.3V generated by SOM's LDO. |
94 | NC | - | - | - | - |
95 | NC | - | - | - | - |
96 | Power | +5VIN | - | - | +4.0-5.5V input power supply. |
97 | Ethernet | ENET1-RXD0 | ENET1_RX_DATA0 | UART4_RTS_B PWM1_OUT |
Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels. |
98 | Power | +5VIN | - | - | +4.0-5.5V input power supply. |
99 | Ethernet | ENET1-RXD1 | ENET1_RX_DATA1 | UART4_CTS_B PWM2_OUT |
Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels. |
100 | Power | +5VIN | - | - | +4.0-5.5V input power supply. |
101 | Ethernet | ENET1-CRS-DV | ENET1_RX_EN | UART5_RTS_B CSI_DATA18 |
Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels. |
102 | Power | +5VIN | - | - | +4.0-5.5V input power supply. |
103 | Power | GND | - | - | - |
104 | Power | +5VIN | - | - | +4.0-5.5V input power supply. |
105 | Ethernet | ENET2-TX-CLK | ENET2_TX_CLK | UART8_CTS_B ECSPI4_MISO |
Ethernet MAC2-PHY interface signal or universal GPIO with 3.3V logic levels. |
106 | Power | +5VIN | - | - | +4.0-5.5V input power supply. |
107 | Power | GND | - | - | - |
108 | Power | +5VIN | - | - | +4.0-5.5V input power supply. |
109 | Ethernet | ENET2-RXER | ENET2_RX_ER | UART8_RTS_B ECSPI4_SS0 |
Ethernet MAC2-PHY interface signal or universal GPIO with 3.3V logic levels. |
110 | Power | +5VIN | - | - | +4.0-5.5V input power supply. |
111 | Ethernet | ENET2-RXD0 | ENET2_RX_DATA0 | UART6_TX I2C3_SCL |
Ethernet MAC2-PHY interface signal or universal GPIO with 3.3V logic levels. |
112 | Power | +5VIN | - | - | +4.0-5.5V input power supply. |
113 | Ethernet | ENET2-RXD1 | ENET2_RX_DATA1 | UART6_RX I2C3_SDA |
Ethernet MAC2-PHY interface signal or universal GPIO with 3.3V logic levels. |
114 | Ethernet | ENET1-TXEN | ENET1_TX_EN | UART6_RTS_B PWM6_OUT |
Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels. |
115 | Power | GND | - | - | - |
116 | Power | GND | - | - | - |
117 | Ethernet | ENET2-CRS-DV | ENET2_RX_EN | UART7_TX I2C4_SCL |
Ethernet MAC2-PHY interface signal or universal GPIO with 3.3V logic levels. |
118 | Ethernet | ENET1-TX-CLK | ENET1_TX_CLK | UART7_CTS_B PWM7_OUT |
Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels. |
119 | Ethernet | ENET2-TXD1 | ENET2_TX_DATA1 | UART8_TX ECSPI4_SCLK |
Ethernet MAC2-PHY interface signal or universal GPIO with 3.3V logic levels. |
120 | Power | GND | - | - | - |
121 | Ethernet | ENET2-TXEN | ENET2_TX_EN | UART8_RX ECSPI4_MOSI |
Ethernet MAC2-PHY interface signal or universal GPIO with 3.3V logic levels. |
122 | Ethernet | ENET1-TXD0 | ENET1_TX_DATA0 | UART5_CTS_B CSI_DATA19 |
Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels. |
123 | Ethernet | ENET2-TXD0 | ENET2_TX_DATA0 | UART7_RX I2C4_SDA |
Ethernet MAC2-PHY interface signal or universal GPIO with 3.3V logic levels. |
124 | Ethernet | ENET1-TXD1 | ENET1_TX_DATA1 | UART6_CTS_B PWM5_OUT |
Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels. |
125 | Power | GND | - | - | - |
126 | Ethernet | ENET1-RXER | ENET1_RX_ER | UART7_RTS_B PWM8_OUT |
Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels. |
127 | Power | GND | - | - | - |
128 | Power | GND | - | - | - |
129 | LCD | LCD-DATA21 | LCD_DATA21 | UART8_RX ECSPI1_SS0 |
LCD interface signal or universal GPIO with 3.3V logic levels. |
130 | Power | GND | - | - | - |
131 | LCD | LCD-DATA22 | LCD_DATA22 | MQS_RIGHT ECSPI1_MOSI |
LCD interface signal or universal GPIO with 3.3V logic levels. |
132 | Power | GND | - | - | - |
133 | LCD | LCD-DATA17 | LCD_DATA17 | UART7_RX CSI_DATA00 |
LCD interface signal or universal GPIO with 3.3V logic levels. |
134 | LCD | LCD-DATA23 | LCD_DATA23 | MQS_LEFT ECSPI1_MISO |
LCD interface signal or universal GPIO with 3.3V logic levels. |
135 | Power | GND | - | - | - |
136 | Power | GND | - | - | - |
137 | LCD | LCD-DATA18 | LCD_DATA18 | PWM5_OUT CA7_MX6UL_EVENTO |
LCD interface signal or universal GPIO with 3.3V logic levels. |
138 | LCD | LCD-DATA19 | LCD_DATA19 | PWM6_OUT WDOG1_WDOG_ANY |
LCD interface signal or universal GPIO with 3.3V logic levels. |
139 | LCD | LCD-DATA13 | LCD_DATA13 | SAI3_TX_BCLK CSI_DATA21 |
LCD interface signal or universal GPIO with 3.3V logic levels. |
140 | LCD | LCD-DATA20 | LCD_DATA20 | UART8_TX ECSPI1_SCLK |
LCD interface signal or universal GPIO with 3.3V logic levels. |
141 | LCD | LCD-DATA14 | LCD_DATA14 | SAI3_RX_DATA CSI_DATA22 |
LCD interface signal or universal GPIO with 3.3V logic levels. |
142 | LCD | LCD-DATA15 | LCD_DATA15 | SAI3_TX_DATA CSI_DATA23 |
LCD interface signal or universal GPIO with 3.3V logic levels. |
143 | LCD | LCD-DATA8 | LCD_DATA08 | SPDIF_IN CSI_DATA16 |
LCD interface signal or universal GPIO with 3.3V logic levels. |
144 | LCD | LCD-DATA16 | LCD_DATA16 | UART7_TX CSI_DATA01 |
LCD interface signal or universal GPIO with 3.3V logic levels. |
145 | LCD | LCD-DATA9 | LCD_DATA09 | SAI3_MCLK CSI_DATA17 |
LCD interface signal or universal GPIO with 3.3V logic levels. |
146 | Power | GND | - | - | - |
147 | Power | GND | - | - | - |
148 | LCD | LCD-DATA11 | LCD_DATA11 | SAI3_RX_BCLK CSI_DATA19 |
LCD interface signal or universal GPIO with 3.3V logic levels. |
149 | LCD | LCD-DATA5 | LCD_DATA05 | UART8_RTS_B ENET2_1588_EVENT2_OUT |
LCD interface signal or universal GPIO with 3.3V logic levels. |
150 | LCD | LCD-DATA12 | LCD_DATA12 | SAI3_TX_SYNC CSI_DATA20 |
LCD interface signal or universal GPIO with 3.3V logic levels. |
151 | LCD | LCD-DATA6 | LCD_DATA06 | UART7_CTS_B ENET2_1588_EVENT3_IN |
LCD interface signal or universal GPIO with 3.3V logic levels. |
152 | LCD | LCD-DATA10 | LCD_DATA10 | SAI3_RX_SYNC CSI_DATA18 |
LCD interface signal or universal GPIO with 3.3V logic levels. |
153 | LCD | LCD-DATA0 | LCD_DATA00 | PWM1_OUT ENET1_1588_EVENT2_IN |
LCD interface signal or universal GPIO with 3.3V logic levels. |
154 | LCD | LCD-DATA3 | LCD_DATA03 | PWM4_OUT ENET1_1588_EVENT3_OUT |
LCD interface signal or universal GPIO with 3.3V logic levels. |
155 | LCD | LCD-DATA1 | LCD_DATA01 | PWM2_OUT ENET1_1588_EVENT2_OUT |
LCD interface signal or universal GPIO with 3.3V logic levels. |
156 | Power | GND | - | - | - |
157 | LCD | LCD-RESET | LCD_RESET | LCDIF_CS CA7_MX6UL_EVENTI |
LCD interface signal or universal GPIO with 3.3V logic levels. |
158 | LCD | LCD-DATA4 | LCD_DATA04 | UART8_CTS_B ENET2_1588_EVENT2_IN |
LCD interface signal or universal GPIO with 3.3V logic levels. |
159 | Power | GND | - | - | - |
160 | LCD | LCD-HSYNC | LCD_HSYNC | LCDIF_RS UART4_CTS_B |
LCD interface signal or universal GPIO with 3.3V logic levels. |
161 | LCD | LCD-CLK | LCD_CLK | LCDIF_WR_RWN UART4_TX |
LCD interface signal or universal GPIO with 3.3V logic levels. |
162 | LCD | LCD-VSYNC | LCD_VSYNC | LCDIF_BUSY UART4_RTS_B |
LCD interface signal or universal GPIO with 3.3V logic levels. |
163 | LCD | LCD-ENABLE | LCD_ENABLE | LCDIF_RD_E UART4_RX |
LCD interface signal or universal GPIO with 3.3V logic levels. |
164 | LCD | LCD-DATA2 | LCD_DATA02 | PWM3_OUT ENET1_1588_EVENT3_IN |
LCD interface signal or universal GPIO with 3.3V logic levels. |
165 | Power | GND | - | - | - |
166 | LCD | LCD-DATA7 | LCD_DATA07 | UART7_RTS_B ENET2_1588_EVENT3_OUT |
LCD interface signal or universal GPIO with 3.3V logic levels. |
167 | SDIO | SDIO1-D0 | SD1_DATA0 | GPT2_COMPARE3 SAI2_TX_SYNC |
SDIO interface signal or universal GPIO with 3.3V logic levels. |
168 | Power | GND | - | - | - |
169 | SDIO | SDIO1-D3 | SD1_DATA3 | GPT2_CAPTURE2 SAI2_TX_DATA |
SDIO interface signal or universal GPIO with 3.3V logic levels. |
170 | Power | GND | - | - | - |
171 | SDIO | SDIO1-D1 | SD1_DATA1 | GPT2_CLK SAI2_TX_BCLK |
SDIO interface signal or universal GPIO with 3.3V logic levels. |
172 | Power | GND | - | - | - |
173 | SDIO | SDIO1-CMD | SD1_CMD | GPT2_COMPARE1 SAI2_RX_SYNC |
SDIO interface signal or universal GPIO with 3.3V logic levels. |
174 | Power | GND | - | - | - |
175 | SDIO | SDIO1-D2 | SD1_DATA2 | GPT2_CAPTURE1 SAI2_RX_DATA |
SDIO interface signal or universal GPIO with 3.3V logic levels. |
176 | Power | GND | - | - | - |
177 | Power | GND | - | - | - |
178 | Power | GND | - | - | - |
179 | SDIO | SDIO1-CLK | SD1_CLK | GPT2_COMPARE2 SAI2_MCLK |
SDIO interface signal or universal GPIO with 3.3V logic levels. |
180 | Power | GND | - | - | - |
181 | Power | GND | - | - | - |
182 | Power | GND | - | - | - |
183 | CSI | CSI-PIXCLK | CSI_PIXCLK | USDHC2_WP RAWNAND_CE3_B |
Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
184 | Power | GND | - | - | - |
185 | Power | GND | - | - | - |
186 | CSI | CSI-DATA6 | CSI_DATA06 | USDHC2_DATA6 ECSPI1_MOSI |
Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
187 | CSI | CSI-MCLK | CSI_MCLK | USDHC2_CD_B RAWNAND_CE2_B |
Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
188 | CSI | CSI-DATA7 | CSI_DATA07 | USDHC2_DATA7 ECSPI1_MISO |
Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
189 | Power | GND | - | - | - |
190 | CSI | CSI-DATA5 | CSI_DATA05 | USDHC2_DATA5 USDHC2_DATA5 |
Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
191 | CSI | CSI-DATA4 | CSI_DATA04 | USDHC2_DATA4 ECSPI1_SCLK |
Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
192 | CSI | CSI-DATA3 | CSI_DATA03 | USDHC2_DATA3 ECSPI2_MISO |
Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
193 | CSI | CSI-DATA1 | CSI_DATA01 | USDHC2_DATA1 ECSPI2_SS0 |
Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
194 | CSI | CSI-DATA2 | CSI_DATA02 | USDHC2_DATA2 ECSPI2_MOSI |
Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
195 | CSI | CSI-DATA0 | CSI_DATA00 | USDHC2_DATA0 ECSPI2_SCLK |
Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
196 | Power | CSI-VREF | - | - | Leave open if not used. |
197 | CSI | CSI-HSYNC | CSI_HSYNC | USDHC2_CMD I2C2_SCL |
Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
198 | CSI | CSI-VSYNC | CSI_VSYNC | SDHC2_CLK I2C2_SDA |
Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
199 | Power | GND | - | - | - |
200 | Power | GND | - | - | - |