Personal tools

SL-TFT7-TP-600-1024-LVDS Datasheet and Pinout

From SomLabs Wiki

Jump to: navigation, search

Display module SL-TFT7-TP-600-1024-LVDS Datasheet and Pinout

General description


The SL-TFT7-TP-600-1024-LVDS is complete display TFT-LCD (1024x600 pixels) module integrated with capactive touch-panel. Module is powered from +5V @800mA (max.), the data interface is LVDS + I2C (for touch-panel controller). SL-TFT7-TP-600-1024-LVDS module is equipped with 22-pin flat cable (A-B), compatible with selected SoMLabs carrier-boards and video converters.

Features

  • Powered by Riverdi RVT70HSLNWC00 TFT module covered with protective glass
  • Intergated flexible signal cable
  • Display size 7 inches
  • Display LCD matrix 1024x600 px
  • Capacitive touch-panel + TP controller
  • LVDSinterface
  • Single supply +5V (all necessary DC/DC converters are built-in)
  • Backlight LEDs built-in
  • Compatible with SoMLabs carrier boards equipped with LVDS video interface

Ordering info

SL-TFT7-TP-600-1024-LVDS - FPC 22-pin flat cable (A-B) is included.

Operating ranges

Parameter Value Unit Comment
Power Supply
5
V
 -
Current
0.8
A
 Maximum value, depends on displayed picture and backlight light intensity
Video input voltage
LVDS levels
V
Touch panel controller IO voltage
max. 3.3
V
 I2C interface, 2.2kΩ pull-up resistor on SDA and SCL lines
Environment temperature
-20…+70
 oC -

Electrical parameters

Signal name Parameter Value Units
Min. Typ. Max.
+3.3V Supply Voltage 3.0 3.3 3.6 V
- Total Supply Current 450 860 1290 mA
VIO Video IO Input Voltage 0 3.3 3.6 V
VTPIO TP Controller IO Voltage 0 3.3 3.6 V
VPWREN Power Enable Input Voltage 0 - 3.3 V
fTPI2C TP Controller I2C Speed - - 400 kHz
fPWM PWM Dimming Frequency - - 1 kHz
RINT Interrupt Output Pull-up Resistance - 10 - kΩ
RPWREN Power Enable Pull-up Resistance - 10 - kΩ
RTPI2C Touch Panel Controller I2C IOs Pull-up Resistance - 2.2 - kΩ

Pinout




IDC20 connector

Connector pin Function name Description
1 +5V Power supply
2 +5V Power supply
3 PWREN Backlight power enable input (10kOhm pull-down)
4 PWMIN Backlight brightness input (PWM)
5 GND -
6 GND -
7 RXIN0- Data lane 0 negative
8 RXIN0+ Data lane 0 positive
9 RXIN1- Data lane 1 negative
10 RXIN1+ Data lane 1 positive
11 RXIN2- Data lane 2 negative
12 RXIN2+ Data lane 2 positive
13 GND -
14 GND -
15 RXCLK- Data clock negative
16 RXCLK+ Data clock positive
17 RXIN3- Data lane 3 negative
18 RXIN3+ Data lane 3 positive
19 TP_SCL Touch panel controller SCL (2.2kOhm pull-up, TTL-LV)
20 TP_SDA Touch panel controller SDA (2.2kOhm pull-up, TTL-LV)

Note:
1. PWREN is external signal input that can be disconnected from DC/DC converter with on-board switch (vide section Switches)
2. PWMIN is external signal input that can be disconnected from DC/DC converter with on-board switch (vide section Switches)

FPC22 connector

Connector pin Function name Description
1 GND -
2 RXIN0- Data lane 0 negative
3 RXIN0+ Data lane 0 positive
4 GND -
5 RXIN1- Data lane 1 negative
6 RXIN1+ Data lane 1 positive
7 GND -
8 RXIN2- Data lane 2 negative
9 RXIN2+ Data lane 2 positive
10 GND -
11 RXCLK- Data clock negative
12 RXCLK+ Data clock positive
13 GND -
14 RXIN3- Data lane 3 negative
15 RXIN3+ Data lane 3 positive
16 PWREN Backlight power enable input (10kOhm pull-down)
17 PWMIN Backlight brightness input (PWM)
18 TP_INT Touch panel interrupt (10kOhm pull-up, TTL-LV)
19 TP_SCL Touch panel controller SCL (2.2kOhm pull-up, TTL-LV)
20 TP_SDA Touch panel controller SDA (2.2kOhm pull-up, TTL-LV)
21 +5V Power supply
22 +5V Power supply

Recommended power supply connection


Dimensions

Retrieved from "https://wiki.somlabs.com/index.php?title=SL-TFT7-TP-600-1024-LVDS_Datasheet_and_Pinout&oldid=3330"