VisionSOM-V2L Datasheet and Pinout
From SomLabs Wiki
VisionSOM-V2L Datasheet and Pinout
Contents
General description
The VisionSOM-V2L family is a SODIMM-sized SoM based on the Renesas dual core RZ/V2L application processor which features an advanced implementation of DRP-AI (ML+AI) coprocessor. The VisionSOM-V2L family offers energy efficient dual ARM Cortex-A55 cores (at speed up to 1.2GHz) and ARM Cortex-M33 core (at speed up to 200MHz) as well as a 3D Graphics Processing Unit (ARM Mali-G31 GPU @500MHz, 1920x1080 @60fps) with Open GL 3.2ES/OpenCL 2.0 (Full Profile) capabilities and Video Codec Processor (VCP) with 1920x1080 @30fps.
The VisionSOM-V2L is a multimedia and video oriented, highly integrated SoM (System on Module) featuring high computation power, optinally integrated 2.4GHz Wi-Fi and Bluetooth v5.1 connectivity. The option of integrated, fully certified Wi-Fi and Bluetooth module simplifies the carrier board design and is ideally suited for wireless application. The VisionSOM-V2L provides a variety memory configuration, including 1GB of fast and efficient DDR4 and eMMC Flash that meets our customers requirements.
The SoM supports connections to a variety of interfaces: two high-speed USB 2.0 with integrated PHY, dual Ethernet 1Gbit, audio, MIPI-DSI display output with optional touch panel, MIPI-CSI camera input with scaling processor, serial communication interfaces including 2xCAN. In addition, the system supports industrial grade embedded applications.
SoMLabs also provides a complete hardware and software development board for the SoM in the form of a carrier board and optional TFT display and touch panel.
Applications
- IoT Edge Devices
- IoT gateways
- Machine vision equipment
- AI+ML Decision/Recognition Systems
- Robotics
- Human-machine Interfaces (HMI)
- IP Cameras
- Home Appliances
- Home Automation – Smart Home
- Residential gateways
- Industrial embedded Linux computer
- Fitness/outdoor equipment
Features
- Powered by dual core Renesas RZ/V2L application processor (R9A07G054L27GBG)
- Dual ARM Cortex-A55 core at speed up to 1.2GHz
- ARM Cortex-M33 core at speed up to 200MHz
- Integrated Machine-Learning (ML) and Artificial Intelligence (AI) AI Accelerator (DRP-AI)
- Integrated 3D GPU (ARM Mali-G31 @500MHz)
- 1GB RAM (DDR4)
- Up to 32GB eMMC memory
- Optional Murata radio module 2.4GHz Wi-Fi and Bluetooth v5.1
- Built-in dual USB 2.0 interface
- Built-in 2xCAN-FD interfaces
- Built-in MIPI-DSI display interface
- Built-in MIPI-CSI camera interface
- Power-efficient and cost-optimized solution
- Ideal for industrial IoT and embedded applications
- Integrated security features
Pictures of SOM versions
Version | Photo |
---|---|
eMMC |
WiFi/BT module is available for all memory configurations. |
Ordering info
SLS | Product type SLS - System on Module |
2 | SOM Name 2 - High Performance VisionSOM SODIM200 module |
2 | CPU Family 2 - Renesas RZ/V2L family |
CpuType | CPU Type RV2LDC - RZ/V2L dual Cortex-A55 + Cortex-M33 + DRP-AI |
Clock | CPU Clock Speed 1200C - 1.2GHz |
RamSize | DDR4 RAM Size 01GR - 1GB (1024MB) |
FlashSize | eMMC Memory Size 04GE - 4GB eMMC 08GE - 8GB eMMC 16GE - 16GB eMMC 32GE - 32GB eMMC |
SF | Special Features 0SF - No Special Features 1WB - Built-in 2.4GHz Wi-Fi and Bluetooth v5.1 |
TEMP | Operating Temperature E - Extended: -25 to +70 C I - Industrial: -40 to +85 C |
Block Diagram
Operating ranges
Parameter | Value | Unit | Comment |
---|---|---|---|
Power Supply | |
|
Connected to VDD 5V SODIM260 pins |
Max. input GPIO voltage | |
|
- |
Environment temperature1 | |
oC | Industrial range w/o WiFi module |
|
Industrial range with WiFi module | ||
|
Consumer range |
Note:
1. Maximum MPU junction temperature is +105oC.
2. Junction temperature determines MPU lifetime. Details: NXP AN13214 Application Note.
Electrical parameters
SOM signal name |
Parameter | Value | Unit | ||
---|---|---|---|---|---|
Min. | Typ. | Max. | |||
VDD-5V | Supply Voltage (Input) | 4.0 | 5.0 | 5.5 | V |
VDD-1V8 | Output power supply for external 1.8V accesories | - | - | 0.31 | A |
VDD-3V3 | Output power supply for external 3.3V accesories | - | - | 0.32 | A |
VGPIO @1V8 | GPIO Input Voltage | 0 | - | 2.05 | V |
VGPIO @3V3 | GPIO Input Voltage | 0 | - | 3.62 | V |
VUSB0-VBUS | USB VBUS Input Voltage | 0 | - | 5.253 | V |
VETH0 | I/O voltage for Ethernet 0 | 0 | 1.8 | - | V |
VETH1 | I/O voltage for Ethernet 1 | 0 | 1.8 or 3.34 | - | V |
VJTAG | I/O voltage for Ethernet 1 | 0 | 1.85 | - | V |
Notes:
1. Total current on both VDD-1V8 outputs.
1. Total current on both VDD-3V3 outputs.
3. Input current is limited by 2,8kOhm resistor connected in series.
4. Depends on logic state on ET1-VDD-SEL (ET1-VDD-SEL='0' -> V=1.8V, ET1-VDD-SEL='1' or left open -> V=3.3V, internally pull-uped.).
5. JTAG/SWD interface lines are 1.8V compatible.
SoM pinout
Important notes:
1. Detail pin configurations description you can find, edit and arrange in dedicated SCFG file (with free "Smart Configurator" tool).
2. JTAG-MOD (ball G2) is permanently connected to GND
3. BOOT-MODE0 – RECOVERY line 0 -> BOOT-MODE0=1
4. BOOT-MODE1...MODE3 are premanently connected to GND
5. SDIO2 interface is used to communication with Murata 1ZM radio module
6. eMMC memory is connected to SDIO3 interface
SOM pin numer | Default function | GPIO | BGA456 ball | Notes |
---|---|---|---|---|
1 | GND | Power | - | |
2 | GND | Power | - | |
3 | ET0-PHY-RST | P47-1 | A20 | 1.8V Power Domain GPIO mode not allowed |
4 | PWR-GOOD | Output | PMIC power-good signalling for external devices | |
5 | ET0-INT | P47-0 | B20 | 3.3V Power Domain |
6 | PWR-ON | Input | PMIC PWRON input (on-off function) Internal pull-down Connect to GND if not used Connect to VDD-3V3 with external pull-up resistor (4.7kOhm) and pushbutton to GND if used | |
7 | ET0-MDIO | I/O | U1 | 1.8V Power Domain GPIO mode not allowed |
8 | PWR-FAIL | Input | PMIC enable-input: PWR-FAIL='0' -> SOM power supply is off PWR-FAIL='1' or left open -> SOM power supply is on Can bue used as cold-reset input (active low) | |
9 | ET0-MDC | I/O | U2 | 1.8V Power Domain GPIO mode not allowed |
10 | RESET-OUT | Output | RESET output for external peripherals | |
11 | GND | Power | - | |
12 | RESET-IN | Input | MPU reset input, active low | |
13 | ET0-RXC | I/O | P2 | 1.8V Power Domain GPIO mode not allowed |
14 | GND | Power | - | |
15 | ET0-RX-CTL | I/O | P1 | 1.8V Power Domain GPIO mode not allowed |
16 | UART0-RXD | P38-1 | B15 | 3.3V Power Domain |
17 | ET0-RXD0 | I/O | R2 | 1.8V Power Domain GPIO mode not allowed |
18 | UART0-TXD | P38-0 | A15 | 3.3V Power Domain |
19 | ET0-RXD1 | I/O | R1 | 1.8V Power Domain GPIO mode not allowed |
20 | UART1-CTS | P41-0 | E17 | 3.3V Power Domain |
21 | ET0-RXD2 | I/O | T2 | 1.8V Power Domain GPIO mode not allowed |
22 | UART1-RTS | P41-1 | A18 | 3.3V Power Domain |
23 | ET0-RXD3 | I/O | T1 | 1.8V Power Domain GPIO mode not allowed |
24 | UART1-RXD | P40-0 | C17 | 3.3V Power Domain |
25 | GND | Power | - | |
26 | UART1-TXD | P40-1 | B17 | 3.3V Power Domain |
27 | ET0-TX-CTL | I/O | N2 | 1.8V Power Domain GPIO mode not allowed |
28 | UART4-RXD | P2-1 | A13 | 3.3V Power Domain |
29 | ET0-TXC | I/O | N1 | 1.8V Power Domain GPIO mode not allowed |
30 | UART4-TXD | P2-0 | B13 | 3.3V Power Domain |
31 | ET0-TXD3 | I/O | N1 | 1.8V Power Domain GPIO mode not allowed |
32 | UART3-RXD | P0-1 | B12 | 3.3V Power Domain |
33 | ET0-TXD2 | I/O | L2 | 1.8V Power Domain GPIO mode not allowed |
34 | UART3-TXD | P0-0 | A11 | 3.3V Power Domain |
35 | ET0-TXD1 | I/O | M2 | 1.8V Power Domain GPIO mode not allowed |
36 | VBAT-RTC | Power | - | RTC 3V battery |
37 | ET0-TXD0 | I/O | M1 | 1.8V Power Domain GPIO mode not allowed |
38 | GND | Power | - | |
39 | VDD-1V8 | Power | 1.8V output for external devices, max. 300 mA | |
40 | VDD-1V8 | Power | 1.8V output for external devices, max. 300 mA | |
41 | VDD-5V0 | Power | External power supply | |
42 | VDD-5V0 | Power | External power supply | |
43 | VDD-5V0 | Power | External power supply | |
44 | VDD-5V0 | Power | External power supply | |
45 | VDD-5V0 | Power | External power supply | |
46 | VDD-5V0 | Power | External power supply | |
47 | VDD-5V0 | Power | External power supply | |
48 | VDD-5V0 | Power | External power supply | |
49 | VDD-5V0 | Power | External power supply | |
50 | VDD-5V0 | Power | External power supply | |
51 | NC | Not Connected | - | |
52 | NC | Not Connected | - | |
53 | VDD-3V3 | Power | 3.3V output for external devices, max. 300mA | |
54 | VDD-3V3 | Power | - | 3.3V output for external devices, max. 300mA |
55 | GND | Power | - | |
56 | SYSLED | P42-0 | AG4 | 3.3V Power Domain |
57 | VPROG | NC | - | For SoMLabs purposes only, leave unconnected |
58 | GND | Power | - | |
59 | BOOT-RECOVERY | Input | BOOT input, active low during reset | |
61 | GND | Power | - | |
62 | SSI0-RXD | P7-1 | AH28 | 3.3V Power Domain |
63 | ET1-VDD-SEL | Input | Ethernet 1 (ET1) interface voltage selection: ET1-VDD-SEL='0' -> V=1.8V ET1-VDD-SEL='1' or left open -> V=3.3V The line has internal pull-up. | |
64 | SSI0-TXD | P7-0 | AJ28 | 3.3V Power Domain |
65 | ET1-PHY-RST | P47-3 | B21 | 3.3V Power Domain |
66 | SSI0-RCK | P6-1 | AH27 | 3.3V Power Domain |
67 | ET1-INT | P47-2 | A21 | 3.3V Power Domain |
68 | SSI0-BCK | P6-0 | AJ27 | 3.3V Power Domain |
69 | ET1-MDIO | P37-1 | W1 | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL GPIO allowed only for 3.3V. |
70 | GND | Power | - | |
71 | ET1-MDC | P37-0 | W2 | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL GPIO allowed only for 3.3V. |
72 | CAN1-RX | P13-0 | AF23 | 3.3V Power Domain |
73 | GND | Power | - | |
74 | CAN1-TX | P12-1 | AE23 | 3.3V Power Domain |
75 | ET1-RXC | P33-1 | AC1 | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL GPIO allowed only for 3.3V. |
76 | CAN0-RX | P42-2 | AJ3 | 3.3V Power Domain |
77 | ET1-RX-CTL | P34-0 | AC2 | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL GPIO allowed only for 3.3V. |
78 | CAN0-TX | P42-1 | AE7 | 3.3V Power Domain |
79 | ET1-RXD0 | P34-1 | AC3 | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL GPIO allowed only for 3.3V. |
80 | GND | Power | - | |
81 | ET1-RXD1 | P35-0 | AC4 | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL GPIO allowed only for 3.3V. |
82 | I2C3-SCL-EXT | P46-3 | D13 | I2C interface used for on-board PMIC configuration Built-in pull-up resistor 2.2kOhm connected to 3.3V 3.3V Power Domain |
83 | ET1-RXD2 | P35-1 | AB4 | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL GPIO allowed only for 3.3V. |
84 | I2C3-SDA-EXT | P46-2 | C12 | I2C interface used for on-board PMIC configuration Built-in pull-up resistor 2.2kOhm connected to 3.3V 3.3V Power Domain |
85 | ET1-RXD3 | P36-0 | AB3 | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL GPIO allowed only for 3.3V. |
86 | I2C2-SCL | P42-4 | AC5 | Built-in pull-up resistor 2.2kOhm connected to 3.3V |
87 | GND | Power | - | |
88 | I2C2-SDA | P42-3 | AH3 | Built-in pull-up resistor 2.2kOhm connected to 3.3V |
89 | ET1-TX-CTL | P29-1 | Y1 | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL GPIO allowed only for 3.3V. |
90 | P19-0 | P19-0 | B1 | 3.3V Power Domain |
91 | ET1-TXC | P29-0 | AB2 | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL GPIO allowed only for 3.3V. |
92 | P18-0 | P18-0 | C2 | 3.3V Power Domain |
93 | ET1-TXD3 | P31-1 | Y2 | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL GPIO allowed only for 3.3V. |
94 | GND | Power | - | |
95 | ET1-TXD2 | P31-0 | AA1 | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL GPIO allowed only for 3.3V. |
96 | P18-1 | P18-1 | D3 | 3.3V Power Domain |
97 | ET1-TXD1 | P30-1 | AA2 | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL GPIO allowed only for 3.3V. |
98 | P45-0 | P45-0 | A8 | 3.3V Power Domain |
99 | ET1-TXD0 | P30-0 | AB1 | 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL GPIO allowed only for 3.3V. |
100 | P45-2 | P45-2 | A9 | 3.3V Power Domain |
101 | GND | Power | - | |
102 | P45-3 | P45-3 | B9 | 3.3V Power Domain |
103 | USB1-D_N | Analog I/O | - | |
104 | P46-0 | P46-0 | B10 | 3.3V Power Domain |
105 | USB1-D_P | Analog I/O | - | |
106 | P46-1 | P46-1 | A10 | 3.3V Power Domain |
107 | USB1-OC | P8-1 | AJ20 | 3.3V Power Domain |
108 | P45-1 | P45-1 | D12 | 3.3V Power Domain |
109 | USB1-EN | P8-0 | AH19 | 3.3V Power Domain |
110 | P1-1 | P1-1 | A12 | 3.3V Power Domain |
111 | GND | Power | - | |
112 | P3-1 | P3-1 | B14 | 3.3V Power Domain |
113 | USB0-OC | P5-0 | AJ4 | 3.3V Power Domain |
114 | P1-0 | P1-0 | C13 | 3.3V Power Domain |
115 | USB0-EN | P4-0 | AJ5 | 3.3V Power Domain |
116 | GND | Power | - | |
117 | USB0-ID | P5-1 | AH4 | 3.3V Power Domain |
118 | P3-0 | P3-0 | A14 | 3.3V Power Domain |
119 | USB0-D_N | Analog I/O | - | |
120 | P48-2 | P48-2 | A22 | 3.3V Power Domain |
121 | USB0-D_P | Analog I/O | - | |
122 | P4-1 | P4-1 | AH6 | 3.3V Power Domain |
123 | USB0-VBUS | Dedicated input | AH10 | 3.3V Power Domain |
124 | P7-2 | P7-2 | AJ19 | 3.3V Power Domain |
125 | GND | Power | - | |
126 | GND | Power | - | |
127 | P11-1 | P11-1 | AF22 | 3.3V Power Domain |
128 | P11-0 | P11-0 | AG22 | 3.3V Power Domain |
129 | P8-2 | P8-2 | AH20 | 3.3V Power Domain |
130 | P12-0 | P12-0 | AE22 | 3.3V Power Domain |
131 | P9-1 | P9-1 | AH21 | 3.3V Power Domain |
132 | P13-1 | P13-1 | AG23 | 3.3V Power Domain |
133 | P9-0 | P9-0 | AJ21 | 3.3V Power Domain |
134 | SPI1-SSL | P44-3 | B19 | 3.3V Power Domain |
135 | SPI0-SSL | P43-3 | B19 | 3.3V Power Domain |
136 | SPI1-MISO | P44-2 | D18 | 3.3V Power Domain |
137 | SPI0-MISO | P43-2 | E18 | 3.3V Power Domain |
138 | SPI1-MOSI | P44-1 | F17 | 3.3V Power Domain |
139 | SPI0-MOSI | P43-1 | D17 | 3.3V Power Domain |
140 | SPI1-CLK | P44-0 | A19 | 3.3V Power Domain |
141 | SPI0-CLK | P43-0 | B18 | 3.3V Power Domain |
142 | GND | Power | - | |
143 | GND | Power | - | |
144 | I2C1-SCL | Dedicated I2C line | C23 | RIIC1_SCL Built-in pull-up resistor 2.2kOhm connected to 3.3V |
145 | P14-0 | P14-0 | AF27 | 3.3V Power Domain |
146 | I2C1-SDA | Dedicated I2C line | A24 | RIIC1_SDA Built-in pull-up resistor 2.2kOhm connected to 3.3V |
147 | P10-1 | P10-1 | AH22 | 3.3V Power Domain |
148 | I2C0-SCL | Dedicated I2C line | B24 | RIIC0_SCL Built-in pull-up resistor 2.2kOhm connected to 3.3V |
149 | P10-0 | P10-0 | AJ22 | 3.3V Power Domain |
150 | I2C0-SDA | Dedicated I2C line | A25 | RIIC0_SDA Built-in pull-up resistor 2.2kOhm connected to 3.3V |
151 | P15-0 | P15-0 | AH23 | 3.3V Power Domain |
152 | GND | Power | - | |
153 | P14-1 | P14-1 | AJ23 | 3.3V Power Domain |
154 | ADC-CH7 | Dedicated analog input | 12-bit ADC, max. 1.8V on input | |
155 | P16-0 | P16-0 | AH24 | 3.3V Power Domain |
156 | ADC-CH6 | Dedicated analog input | 12-bit ADC, max. 1.8V on input | |
157 | P15-1 | P15-1 | AJ24 | 3.3V Power Domain |
158 | ADC-CH5 | Dedicated analog input | 12-bit ADC, max. 1.8V on input | |
159 | P17-0 | P17-0 | AH25 | 3.3V Power Domain |
160 | ADC-CH4 | Dedicated analog input | 12-bit ADC, max. 1.8V on input | |
160 | SSI-MCLK | AUDIO-CLK | E12 | Reference clock output (for audio codec) |
161 | P16-1 | P16-1 | AJ25 | 3.3V Power Domain |
162 | ADC-CH3 | Dedicated analog input | 12-bit ADC, max. 1.8V on input | |
163 | P17-2 | P17-2 | AH26 | 3.3V Power Domain |
164 | ADC-CH2 | Dedicated analog input | 12-bit ADC, max. 1.8V on input | |
165 | P17-1 | P17-1 | AJ26 | 3.3V Power Domain |
166 | ADC-CH1 | Dedicated analog input | 12-bit ADC, max. 1.8V on input | |
167 | P13-2 | P13-2 | AG26 | 3.3V Power Domain |
168 | ADC-CH0 | Dedicated analog input | 12-bit ADC, max. 1.8V on input | |
169 | GND | Power | - | |
170 | GND | Power | - | |
171 | DSI-DATA3_P | Analog I/O | AH18 | MIPI-DSI line |
172 | CSI-DATA3_N | Analog I/O | AH11 | MIPI-CSI line |
173 | DSI-DATA3_N | Analog I/O | AJ18 | MIPI-DSI line |
174 | CSI-DATA3_P | Analog I/O | AJ11 | MIPI-CSI line |
175 | GND | Power | - | |
176 | GND | Power | - | |
177 | DSI-DATA2_P | Analog I/O | AH15 | MIPI-DSI line |
178 | CSI-DATA2_N | Analog I/O | AH14 | MIPI-CSI line |
179 | DSI-DATA2_N | Analog I/O | AJ15 | MIPI-DSI line |
180 | CSI-DATA2_P | Analog I/O | AJ14 | MIPI-CSI line |
181 | GND | Power | - | |
182 | GND | Power | - | |
183 | DSI-CLK_P | Analog I/O | AG17 | MIPI-DSI line |
184 | CSI-CLK_N | Analog I/O | AG12 | MIPI-CSI line |
185 | DSI-CLK_N | Analog I/O | AG18 | MIPI-DSI line |
186 | CSI-CLK_P | Analog I/O | AG13 | MIPI-CSI line |
187 | GND | Power | - | |
188 | GND | Power | - | |
189 | DSI-DATA1_P | Analog I/O | AH17 | MIPI-DSI line |
190 | CSI-DATA1_N | Analog I/O | AH12 | MIPI-CSI line |
191 | DSI-DATA1_N | Analog I/O | AJ17 | MIPI-DSI line |
192 | CSI-DATA1_P | Analog I/O | AJ12 | MIPI-CSI line |
193 | GND | Power | - | |
194 | GND | Power | - | |
195 | DSI-DATA0_P | Analog I/O | AH16 | MIPI-DSI line |
196 | CSI-DATA0_N | Analog I/O | AH13 | MIPI-CSI line |
197 | DSI-DATA0_N | Analog I/O | AJ16 | MIPI-DSI line |
198 | CSI-DATA0_P | Analog I/O | AJ13 | MIPI-CSI line |
199 | GND | Power | - | |
200 | GND | Power | - | |
- | WLAN-ENABLE | P40-2 | A17 | 1DX radio module line (WiFi) Not available externally |
- | WLAN-H-WAKE | P19-1 | B2 | 1DX radio module line (WiFi) Not available externally |
- | SD1-CLK | - | H3 | 1DX radio module line (WiFi) Not available externally |
- | SD1-CMD | - | J2 | 1DX radio module line (WiFi) Not available externally |
- | SD1-DATA0 | - | H1 | 1DX radio module line (WiFi) Not available externally |
- | SD1-DATA1 | - | H2 | 1DX radio module line (WiFi) Not available externally |
- | SD1-DATA2 | - | K2 | 1DX radio module line (WiFi) Not available externally |
- | SD1-DATA3 | - | J1 | 1DX radio module line (WiFi) Not available externally |
- | UART2-RXD | P48-1 | B23 | 1DX radio module line (BLE) Not available externally |
- | UART2-TXD | P48-0 | B22 | 1DX radio module line (BLE) Not available externally |
- | UART2-RTS | P48-4 | B23 | 1DX radio module line (BLE) Not available externally |
- | UART2-CTS | P48-3 | C22 | 1DX radio module line (BLE) Not available externally |
- | BT-DEV-WAKE | P39-0 | A16 | 1DX radio module line (BLE) Not available externally |
- | BT-HOST-WAKE | P39-1 | C15 | 1DX radio module line (BLE) Not available externally |
- | BT-REG-ON | P39-3 | B16 | 1DX radio module line (BLE) Not available externally |
- | JTAG-TMS | AD2 | JTAG interface 1.8V Power Domain | |
- | JTAG-TCK | AE1 | JTAG interface 1.8V Power Domain | |
- | JTAG-TDO | AE2 | JTAG interface 1.8V Power Domain | |
- | JTAG-TDI | AF1 | JTAG interface 1.8V Power Domain | |
- | JTAG-TRST | AF2 | JTAG interface 1.8V Power Domain | |
- | QSPI-CLK | C4 | Optional on-board QSPI Flash (W25Q128FWPIG) | |
- | QSPI-IO0 | A3 | Optional on-board QSPI Flash (W25Q128FWPIG) | |
- | QSPI-IO1 | B3 | Optional on-board QSPI Flash (W25Q128FWPIG) | |
- | QSPI-IO2 | A4 | Optional on-board QSPI Flash (W25Q128FWPIG) | |
- | QSPI-IO3 | B4 | Optional on-board QSPI Flash (W25Q128FWPIG) | |
- | QSPI-SS | A2 | Optional on-board QSPI Flash (W25Q128FWPIG) |