VisionCB-RT1176-STD
From SomLabs Wiki
Revision as of 11:36, 1 July 2024 by Piotrzbysinski (talk | contribs)
| VisionCB-RT1176-STD |
|
VisionCB-RT1176-STD is a carrier board for the VisionSOM-RT1170 family of computer-on-modules, which are powered by NXP i.MX RT1170x application processors. The carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as audio codec, USB, Ethernet, UART, RS485, CAN etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product. |
| Specifications |
| SOM compatibility | VisionSOM-RT module with NXP i.MX-RT117x microcontroller |
| SOM socket | SODIMM200 |
| Display connector | MIPI-DSI (FPC30) |
| Network | 1x Ethernet 10/100/1000 Mbit/s, RJ45 |
| USB | USB 2.0 host x1, USB-OTG 2.0 x1 |
| Debugger | JTAG connector for external debugger |
| Console interface | SWDAP and vCOM (console port) |
| Switches | 4+1 (reset) |
| LEDs | 4 + 1 (power) |
| Connectors | 3 sections of GPIO |
| RTC Backup | CR2032 battery |
| Power supply | External 9-12V DC |
| Dimensions | 145mm x 90mm x 17mm |
