VisionSOM-6ULL Datasheet and Pinout
From SomLabs Wiki
VisionSOM-6ULL Datasheet and Pinout
General description
The VisionSOM-6ULL family is a SODIMM-sized SoM based on the NXP i.MX6 ULL application processor which features an advanced implementation of a single ARM Cortex-A7 core (at speeds up to 900MHz).
The VisionSOM-6ULL is a low power highly integrated SoM (System on Module) featuring high computation power and 802.11b/g/n Wi-Fi and Bluetooth v4.1 connectivity. The option of integrated, fully certified Wi-Fi and Bluetooth module simplifies the carrier board design and is ideally suited for wireless application. The VisionSOM-6ULL provides a variety memory configuration including flexible range of DDR3L, NAND, eMMC and SD memory card that meets our customers requirements.
The SoM supports connections to a variety of interfaces: two high-speed USB on-the-go with PHY, dual Ethernet, audio, display with touch panel and serial interfaces. In addition, the system supports industrial grade targeting embedded application.
SOMLabs also provides a complete hardware and software development board for the SoM in the form of a carrier board and optional TFT display and touch panel.
Applications
- Industrial embedded Linux computer
- Home Appliances
- Home Automation – Smart Home
- Human-machine Interfaces (HMI)
- Point-of-sales (POS) terminals
- Cash Register
- 2D barcode scanners and printers
- Smart grid Infrastructure
- IoT gateways
- Residential getaways
- Machine vision equipment
- Robotics
- Fitness/outdoor equipment
Features
- Powered by NXP i.MX 6ULL application processor
- Core clock up to 900MHz
- Up to 512MB SDRAM DDR3L
- Up to 512MB NAND Flash / 32GB eMMC / uSD memory card
- Optional Murata 802.11b/g/n Wi-Fi and Bluetooth v4.1+EDR module
- Power-efficient and cost-optimized solution
- Ideal for industrial IoT and embedded applications
- Integrated security features
Pictures of SOM versions
Version | Photo |
---|---|
eMMC | |
micro-SD | |
NAND Flash |
Wi-Fi is available for all memory variants configurations. |
Ordering info
SLS | Product type SLS - System on Module |
N | SOM Name 1 - VisionSOM SODIMM200 |
6 | CPU Family 6 - i.MX6 |
CpuType | CPU Type Y0 - i.MX6 ULL Y0 Y1 - i.MX6 ULL Y1 Y2 - i.MX6 ULL Y2 |
Clock | CPU Clock Speed 528C - 528MHz 792C - 792MHz 900C - 900MHz |
RamSize | DDR3 RAM Size 64R - 64MB 128R - 128MB 256R - 256MB 512R - 512MB |
FlashSize | Flash Size Type and Density SD - MicroSD connector 128N - 128MB NAND 256N - 256MB NAND 512N - 512MB NAND 04GE - 4GB eMMC 08GE - 8GB eMMC 16GE - 16GB eMMC 32GE - 32GB eMMC |
SF | Special Features 0SF - No Special Features 1WB - Built-in 802.11b/g/n Wi-Fi and Bluetooth v4.1+EDR Module |
TEMP | Operating Temperature C - Consumer: 0 to +70 C SI - Industrial with Wi-Fi: -30 to +70 C I - Industrial: -40 to +85 C |
V | SOM Version A - Version 1.0 |
Block Diagram
Operating ranges
Parameter | Value | Unit | Comment |
---|---|---|---|
Power Supply | Connected to +5VIN SODIMM pin | ||
Input GPIO voltage | - | ||
Environment temperature1 | oC | Industrial range w/o WiFi module | |
Industrial range with WiFi module | |||
Consumer range |
Note:
1. Maximum MPU junction temperature is +105oC (industrial version) or +95oC (consumer version).
Electrical parameters
SOM signal name |
Parameter | Value | Units | ||
---|---|---|---|---|---|
Min. | Typ. | Max. | |||
+5VIN | Supply Voltage | 4.0 | 5.0 | 5.5 | V |
- | Total Supply Current1 | x | x | x | A |
VGPIO | GPIO Input Voltage | 0 | 3.3 | 3.62 | V |
+3.3VOUT | SOM Internal LDO Output Current |
- | - | 0.5 | A |
USB-OTGx-VBUS | USB Supply | 4.40 | - | 5.5 | V |
VDD-COIN-3V | SNVS Backup Battery Supply |
2.66 | - | 3.6 | V |
- | ADC Inputs Voltage | 0 | - | 3.3 | V |
Notes:
1. Excluding external load connected to +3.3VOUT lines.
2. Applying the maximum voltage 3.6V results in shorten lifetime. Recommended value is smaller than 3.5V.
SOM pinout
SODIMM PIN | Functionaldomain | Functionname | i.MX6 UltraLite/ULL Pad Name | Alternate functions | Description (refer to i.MX6 UltraLite/ULL manuals for details) |
---|---|---|---|---|---|
1 | Power | GND | - | - | - |
2 | Power | GND | - | - | - |
3 | Ctrl | PMIC-STBY-REQ | CCM_PMIC_STBY_REQ | - | Output, leave open if not used. |
4 | Ctrl | MX6-POR-B | - | - | External warm reset input, active L. |
5 | Ctrl | PMIC-ON-REQ | SNVS_PMIC_ON_REQ | - | Output, leave open if not used. |
6 | Power | VDD-SNVS-3V3 | VDD_SNVS_IN | - | SNVS backup power supply must be held between 2.9V and 3.3V if the system requires keeping real time and other data on OFF state. Internally connected to +3.3V, leave open. |
7 | BOOT | BOOT-MODE1 | BOOT_MODE1 | GPIO5_IO11 | BOOT-MODE1 BOOT-MODE000 boot from fuses (default)01 serial downloader10 internal boot11 reserved |
8 | Power | VDD-COIN-3V | VDD_SNVS_IN | - | Optional external coin battery for SNVS power domain, must be held between 2.9V and 3.3V if the system requires keeping real time and other data on OFF state.Leave open if not used. |
9 | BOOT | BOOT-MODE0 | BOOT_MODE0 | GPIO5_IO10 | BOOT-MODE1 BOOT-MODE000 boot from fuses (default)01 serial downloader10 internal boot11 reserved |
10 | GPIO-SNVS | SNVS-TAMPER9 | SNVS_TAMPER9 | GPIO5_IO09 | Tamper input (SNVS power domain) or GPIO 3.3V. |
11 | USB | USB-OTG2-VBUS | USB_OTG2_VBUS | - | +5V USB bus. Leave open if not used. |
12 | GPIO-SNVS | SNVS-TAMPER5 | SNVS_TAMPER5 | GPIO5_IO05 | Tamper input (SNVS power domain) or GPIO 3.3V. |
13 | USB | USB-OTG1-VBUS | USB_OTG1_VBUS | - | +5V USB bus. Leave open if not used. |
14 | Ctrl | ONOFF | SRC_RESET_B | Input for power interrupt generation. Leave open if not used. | |
15 | Power | GND | - | - | - |
16 | Ctrl | POR-B | POR_B | - | Cold reset negative logic input resets all modules and logic in the IC.May be used in addition to internally generated power on reset signal (logical AND, both internaland external signals are considered active low). |
17 | Power | GND | - | - | - |
18 | GPIO-SNVS | SNVS-TAMPER8 | SNVS_TAMPER8 | GPIO5_IO08 | Tamper input (SNVS power domain) or GPIO 3.3V. |
19 | USB | USB-OTG2-DP | USB_OTG2_DP | - | Leave open if not used. |
20 | Power | GND | - | - | - |
21 | USB | USB-OTG2-DN | USB_OTG2_DN | - | Leave open if not used. |
22 | Power | GND | - | - | - |
23 | Power | GND | - | - | - |
24 | GPIO-SNVS | SNVS-TAMPER7 | SNVS_TAMPER7 | GPIO5_IO07 | Tamper input (SNVS power domain) or GPIO 3.3V. |
25 | USB | USB-OTG1-DP | USB_OTG1_DP | - | Leave open if not used. |
26 | Power | GND | - | - | - |
27 | USB | USB-OTG1-DN | USB_OTG1_DN | - | Leave open if not used. |
28 | Power | GND | - | - | - |
29 | Power | GND | - | - | - |
30 | GPIO-SNVS | SNVS-TAMPER4 | SNVS_TAMPER4 | GPIO5_IO04 | Tamper input (SNVS power domain) or GPIO 3.3V. |
31 | USB | nUSB-OTG-CHD | USB_OTG1_CHD_B | - | Leave open if not used. |
32 | GPIO-SNVS | SNVS-TAMPER1 | SNVS_TAMPER1 | GPIO5_IO01 | Tamper input (SNVS power domain) or GPIO 3.3V. |
33 | JTAG | JTAG-MOD | JTAG_MOD | - | Leave open if not used. |
34 | GPIO-SNVS | SNVS-TAMPER3 | SNVS_TAMPER3 | GPIO5_IO03 | Tamper input (SNVS power domain) or GPIO 3.3V. |
35 | Power | GND | - | - | - |
36 | GPIO-SNVS | SNVS-TAMPER0 | SNVS_TAMPER0 | GPIO5_IO00 | Tamper input (SNVS power domain) or GPIO 3.3V. |
37 | CLK1-N | CCM_CLK1_N | - | General purpose differential high speed clock input/output.Leave open if not used. | |
38 | Power | GND | - | - | - |
39 | CLK1-P | CCM_CLK1_P | - | General purpose differential high speed clock input/output.Leave open if not used. | |
40 | Power | GND | - | - | - |
41 | Power | GND | - | - | - |
42 | GPIO-SNVS | SNVS-TAMPER6 | SNVS_TAMPER6 | GPIO5_IO06 | Tamper input (SNVS power domain) or GPIO 3.3V. |
43 | JTAG | JTAG-TDI | JTAG_TDI | - | JTAG TDI input line. |
44 | GPIO-SNVS | SNVS-TAMPER2 | SNVS_TAMPER2 | GPIO5_IO02 | Tamper input (SNVS power domain) or GPIO 3.3V. |
45 | GPIO | GPIO-8 | GPIO1_IO08 | PWM1_OUTWDOG1_WDOG_BSPDIF_OUTCSI_VSYNCUSDHC2_VSELECTCCM_PMIC_RDYUART5_RTS_B | Universal GPIO with 3.3V logic levels. |
46 | JTAG | JTAG-TMS | JTAG_TMS | - | JTAG TMS input line. |
47 | GPIO | GPIO-4 | GPIO1_IO04 | ENET1_REF_CLK1PWM3_OUTUSB_OTG1_PWRUSDHC1_RESET_BENET2_1588_EVENT0_INUART5_TX | Universal GPIO with 3.3V logic levels. |
48 | JTAG | JTAG-nTRST | JTAG_TRST_B | - | JTAG TRST input line (active L). |
49 | GPIO | GPIO-5 | GPIO1_IO05WLAN-ENABLE in SOM with WiFi/BT module | ENET2_REF_CLK2PWM4_OUTANATOP_OTG2_IDCSI_FIELDUSDHC1_VSELECTENET2_1588_EVENT0_OUTUART5_RX | Universal GPIO with 3.3V logic levels. |
50 | Power | GND | - | - | - |
51 | Power | GND | - | - | - |
52 | JTAG | JTAG-TDO | JTAG_TDO | - | JTAG TDO output line. |
53 | GPIO | GPIO-7 | GPIO1_IO07 | NET1_MDCENET2_MDCUSB_OTG_HOST_MODECSI_PIXCLKUSDHC2_CD_BCCM_STOPUART1_RTS_B | Universal GPIO with 3.3V logic levels. |
54 | JTAG | JTAG-TCK | JTAG_TCK | - | JTAG TCK input line. |
55 | GPIO | GPIO-3 | GPIO1_IO03 | I2C1_SDAGPT1_COMPARE3USB_OTG2_OCUSDHC1_CD_BCCM_DI0_EXT_CLKSRC_TESTER_ACK | Universal GPIO with 3.3V logic levels. |
56 | GPIO | GPIO-9 | GPIO1_IO09 | PWM2_OUTWDOG1_WDOG_ANYSPDIF_INCSI_HSYNCUSDHC2_RESET_BUSDHC1_RESET_BUART5_CTS_B | Universal GPIO with 3.3V logic levels. |
57 | COM-GPIO | UART1-TXD | UART1_TX_DATA | ENET1_RDATA02I2C3_SCLCSI_DATA02GPT1_COMPARE1GPIO1_IO16SPDIF_OUTUART5_TX of | Default: UART1 TxD outputor universal GPIO with 3.3V logic levels. |
58 | GPIO | GPIO-2 | GPIO1_IO02 | I2C1_SCLGPT1_COMPARE2USB_OTG2_PWRENET1_REF_CLK_25MUSDHC1_WPSDMA_EXT_EVENT00SRC_ANY_PU_RESETUART1_TX | Universal GPIO with 3.3V logic levels. |
59 | Power | GND | - | - | - |
60 | Power | GND | - | - | - |
61 | GPIO | GPIO-6 | GPIO1_IO06 | ENET1_MDIOENET2_MDIOUSB_OTG_PWR_WAKECSI_MCLKUSDHC2_WPCCM_WAITCCM_REF_EN_BUART1_CTS_B | Universal GPIO with 3.3V logic levels. |
62 | GPIO | GPIO-1 | GPIO1_IO01 | I2C2_SDAGPT1_COMPARE1USB_OTG1_OCENET2_REF_CLK2MQS_LEFTENET1_1588_EVENT0_OUTSRC_EARLY_RESETWDOG1_WDOG_B | Universal GPIO with 3.3V logic levels. |
63 | COM-GPIO | UART1-RXD | UART1_RX_DATA | ENET1_RDATA03I2C3_SDACSI_DATA03GPT1_CLKGPIO1_IO17SPDIF_INUART5_RX | Default: UART1 RxD inputor universal GPIO with 3.3V logic levels. |
64 | GPIO | GPIO-0 | GPIO1_IO00 | I2C2_SCLGPT1_CAPTURE1ANATOP_OTG1_IDENET1_REF_CLK1MQS_RIGHTENET1_1588_EVENT0_INSRC_SYSTEM_RESETWDOG3_WDOG_B | Universal GPIO with 3.3V logic levels. |
65 | COM-GPIO | UART2-TXD | UART2_TX_DATA | ENET1_TDATA02I2C4_SCLCSI_DATA06GPT1_CAPTURE1GPIO1_IO20ECSPI3_SS0 | Default: UART2 TxD outputor universal GPIO with 3.3V logic levels. |
66 | COM-GPIO | UART1-CTS | UART1_CTS_B | ENET1_RX_CLKUSDHC1_WPCSI_DATA04ENET2_1588_EVENT1_INGPIO1_IO18USDHC2_WPUART5_CTS_B | Default: UART1 CTS outputor universal GPIO with 3.3V logic levels. |
67 | COM-GPIO | UART2-RXD | UART2_RX_DATA | ENET1_TDATA03I2C4_SDACSI_DATA07GPT1_CAPTURE2GPIO1_IO21SJC_DONEECSPI3_SCLK | Default: UART2 RxD inputor universal GPIO with 3.3V logic levels. |
68 | COM-GPIO | UART5-RXD | UART5_RX_DATA | ENET2_COLI2C2_SDACSI_DATA15CSU_CSU_INT_DEBGPIO1_IO31ECSPI2_MISOEPDC_PWRCTRL03 | Default: UART5 RxD inputor universal GPIO with 3.3V logic levels. |
69 | COM-GPIO | UART3-TXD | UART3_TX_DATA | ENET2_RDATA02CSI_DATA01UART2_CTS_BGPIO1_IO24SJC_JTAG_ACT | Default: UART3 TxD inputor universal GPIO with 3.3V logic levels. |
70 | Power | GND | - | - | - |
71 | Power | GND | - | - | - |
72 | COM-GPIO | UART2-CTS | UART2_CTS_B | ENET1_CRSFLEXCAN2_TXCSI_DATA08GPT1_COMPARE2GPIO1_IO22SJC_DE_BECSPI3_MOSI | Default: UART2 CTS outputor universal GPIO with 3.3V logic levels. |
73 | COM-GPIO | UART3-RXD | UART3_RX_DATA | ENET2_RDATA03CSI_DATA00UART2_RTS_BGPIO1_IO25EPIT1_OUT | Default: UART3 RxD inputor universal GPIO with 3.3V logic levels. |
74 | COM-GPIO | UART1-RTS | UART1_RTS_B | ENET1_TX_ERUSDHC1_CD_BCSI_DATA05ENET2_1588_EVENT1_OUTGPIO1_IO19USDHC2_CD_BUART5_RTS_B | Default: UART1 RTS inputor universal GPIO with 3.3V logic levels. |
75 | COM-GPIO | UART4-TXD | UART4_TX_DATA | ENET2_TDATA02I2C1_SCLCSI_DATA12CSU_CSU_ALARM_AUT02GPIO1_IO28ECSPI2_SCLK | Default: UART4 TxD outputor universal GPIO with 3.3V logic levels. |
76 | COM-GPIO | UART3-CTS | UART3_CTS_B | ENET2_RX_CLKFLEXCAN1_TXCSI_DATA10ENET1_1588_EVENT1_INGPIO1_IO26EPIT2_OUT | Default: UART3 CTS outputor universal GPIO with 3.3V logic levels. |
77 | COM-GPIO | UART4-RXD | UART4_RX_DATA | ENET2_TDATA03I2C1_SDACSI_DATA13CSU_CSU_ALARM_AUT01GPIO1_IO29ECSPI2_SS0EPDC_PWRCTRL01 | Default: UART4 RxD inputor universal GPIO with 3.3V logic levels. |
78 | COM-GPIO | UART2-RTS | UART2_RTS_B | ENET1_COLFLEXCAN2_RXCSI_DATA09GPT1_COMPARE3GPIO1_IO23SJC_FAILECSPI3_MISO | Default: UART2 RTS inputor universal GPIO with 3.3V logic levels. |
79 | COM-GPIO | UART5-TXD | UART5_TX_DATA | GPIO1_IO30ECSPI2_MOSIEPDC_PWRCTRL02ENET2_CRSI2C2_SCLCSI_DATA14CSU_CSU_ALARM_AUT00 | Default: UART5 TxD outputor universal GPIO with 3.3V logic levels. |
80 | COM-GPIO | UART3-RTS | UART3_RTS_B | ENET2_TX_ERFLEXCAN1_RXCSI_DATA11ENET1_1588_EVENT1_OUTGPIO1_IO27WDOG1_WDOG_B | Default: UART3 RTS inputor universal GPIO with 3.3V logic levels. |
81 | Power | GND | - | - | - |
82 | Power | GND | - | - | - |
83 | NC | - | - | - | - |
84 | Power | GND | - | - | - |
85 | Power | +3.3VOUT | - | - | +3.3V generated by SOM's LDO. |
86 | NC | - | - | - | - |
87 | Power | +3.3VOUT | - | - | +3.3V generated by SOM's LDO. |
88 | Power | +3.3VOUT | - | - | +3.3V generated by SOM's LDO. |
89 | Power | +3.3VOUT | - | - | +3.3V generated by SOM's LDO. |
90 | Power | +3.3VOUT | - | - | +3.3V generated by SOM's LDO. |
91 | Power | +3.3VOUT | - | - | +3.3V generated by SOM's LDO. |
92 | Power | +3.3VOUT | - | - | +3.3V generated by SOM's LDO. |
93 | Power | +3.3VOUT | - | - | +3.3V generated by SOM's LDO. |
94 | NC | - | - | - | - |
95 | NC | - | - | - | - |
96 | Power | +5VIN | - | - | +4.0-5.5V input power supply. |
97 | Ethernet | ENET1-RXD0 | ENET1_RX_DATA0 | UART4_RTS_BPWM1_OUTCSI_DATA16FLEXCAN1_TXGPIO2_IO00KPP_ROW00USDHC1_LCTLEPDC_SDCE04 | Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels. |
98 | Power | +5VIN | - | - | +4.0-5.5V input power supply. |
99 | Ethernet | ENET1-RXD1 | ENET1_RX_DATA1 | UART4_CTS_BPWM2_OUTCSI_DATA17FLEXCAN1_RXGPIO2_IO01KPP_COL00USDHC2_LCTLEPDC_SDCE05 | Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels. |
100 | Power | +5VIN | - | - | +4.0-5.5V input power supply. |
101 | Ethernet | ENET1-CRS-DV | ENET1_RX_EN | UART5_RTS_BCSI_DATA18FLEXCAN2_TXGPIO2_IO02KPP_ROW01USDHC1_VSELECTEPDC_SDCE06 | Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels. |
102 | Power | +5VIN | +4.0-5.5V input power supply. | ||
103 | Power | GND | - | - | - |
104 | Power | +5VIN | +4.0-5.5V input power supply. | ||
105 | Ethernet | ENET2-TX-CLK | ENET2_TX_CLK | UART8_CTS_BECSPI4_MISOENET2_REF_CLK2GPIO2_IO14KPP_ROW07ANATOP_OTG2_IDEPDC_SDDO14 | Ethernet MAC2-PHY interface signal or universal GPIO with 3.3V logic levels. |
106 | Power | +5VIN | +4.0-5.5V input power supply. | ||
107 | Power | GND | - | - | - |
108 | Power | +5VIN | +4.0-5.5V input power supply. | ||
109 | Ethernet | ENET2-RXER | ENET2_RX_ER | UART8_RTS_BECSPI4_SS0EIM_ADDR25GPIO2_IO15KPP_COL07WDOG1_WDOG_ANYEPDC_SDDO15 | Ethernet MAC2-PHY interface signal or universal GPIO with 3.3V logic levels. |
110 | Power | +5VIN | - | - | +4.0-5.5V input power supply. |
111 | Ethernet | ENET2-RXD0 | ENET2_RX_DATA0 | UART6_TXI2C3_SCLENET1_MDIOGPIO2_IO08KPP_ROW04USB_OTG1_PWREPDC_SDDO08 | Ethernet MAC2-PHY interface signal or universal GPIO with 3.3V logic levels. |
112 | Power | +5VIN | - | - | +4.0-5.5V input power supply. |
113 | Ethernet | ENET2-RXD1 | ENET2_RX_DATA1 | UART6_RXI2C3_SDAENET1_MDCGPIO2_IO09KPP_COL04USB_OTG1_OCEPDC_SDDO09 | Ethernet MAC2-PHY interface signal or universal GPIO with 3.3V logic levels. |
114 | Ethernet | ENET1-TXEN | ENET1_TX_EN | UART6_RTS_BPWM6_OUTCSI_DATA21ENET2_MDCGPIO2_IO05KPP_COL02WDOG2_WDOG_RST_B_DEBEPDC_SDCE09 | Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels. |
115 | Power | GND | - | - | - |
116 | Power | GND | - | - | - |
117 | Ethernet | ENET2-CRS-DV | ENET2_RX_EN | UART7_TXI2C4_SCLEIM_ADDR26GPIO2_IO10KPP_ROW05ENET1_REF_CLK_25MEPDC_SDDO10 | Ethernet MAC2-PHY interface signal or universal GPIO with 3.3V logic levels. |
118 | Ethernet | ENET1-TX-CLK | ENET1_TX_CLK | UART7_CTS_BPWM7_OUTCSI_DATA22ENET1_REF_CLK1GPIO2_IO06KPP_ROW03GPT1_CLKEPDC_SDOED | Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels. |
119 | Ethernet | ENET2-TXD1 | ENET2_TX_DATA1 | UART8_TXECSPI4_SCLKEIM_EB_B03GPIO2_IO12KPP_ROW06USB_OTG2_PWREPDC_SDDO12 | Ethernet MAC2-PHY interface signal or universal GPIO with 3.3V logic levels. |
120 | Power | GND | - | - | - |
121 | Ethernet | ENET2-TXEN | ENET2_TX_EN | UART8_RXECSPI4_MOSIEIM_ACLK_FREERUNGPIO2_IO13KPP_COL06USB_OTG2_OCEPDC_SDDO13 | |
122 | Ethernet | ENET1-TXD0 | ENET1_TX_DATA0 | UART5_CTS_BCSI_DATA19FLEXCAN2_RXGPIO2_IO03KPP_COL01USDHC2_VSELECTEPDC_SDCE07 | Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels. |
123 | Ethernet | ENET2-TXD0 | ENET2_TX_DATA0 | UART7_RXI2C4_SDAEIM_EB_B02GPIO2_IO11KPP_COL05EPDC_SDDO11 | Ethernet MAC2-PHY interface signal or universal GPIO with 3.3V logic levels. |
124 | Ethernet | ENET1-TXD1 | ENET1_TX_DATA1 | UART6_CTS_BPWM5_OUTCSI_DATA20ENET2_MDIOGPIO2_IO04KPP_ROW02WDOG1_WDOG_RST_B_DEBEPDC_SDCE08 | Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels. |
125 | Power | GND | - | - | - |
126 | Ethernet | ENET1-RXER | ENET1_RX_ER | UART7_RTS_BPWM8_OUTCSI_DATA23EIM_CREGPIO2_IO07KPP_COL03GPT1_CAPTURE2EPDC_SDOEZ | Ethernet MAC1-PHY interface signal or universal GPIO with 3.3V logic levels. |
127 | Power | GND | - | - | - |
128 | Power | GND | - | - | - |
129 | LCD | LCD-DATA21 | LCD_DATA21 | UART8_RXECSPI1_SS0CSI_DATA13EIM_DATA13GPIO3_IO26SRC_BT_CFG29USDHC2_DATA1EPDC_SDCE01 | LCD interface signal or universal GPIO with 3.3V logic levels. |
130 | Power | GND | - | - | - |
131 | LCD | LCD-DATA22 | LCD_DATA22 | MQS_RIGHTECSPI1_MOSICSI_DATA14EIM_DATA14GPIO3_IO27SRC_BT_CFG30USDHC2_DATA2USDHC2_DATA2 | LCD interface signal or universal GPIO with 3.3V logic levels. |
132 | Power | GND | - | - | - |
133 | LCD | LCD-DATA17 | LCD_DATA17 | UART7_RXCSI_DATA00EIM_DATA09GPIO3_IO22SRC_BT_CFG25USDHC2_DATA7EPDC_GDSP | LCD interface signal or universal GPIO with 3.3V logic levels. |
134 | LCD | LCD-DATA23 | LCD_DATA23 | MQS_LEFTECSPI1_MISOCSI_DATA15EIM_DATA15GPIO3_IO28SRC_BT_CFG31USDHC2_DATA3EPDC_SDCE03 | LCD interface signal or universal GPIO with 3.3V logic levels. |
135 | Power | GND | - | - | - |
136 | Power | GND | - | - | - |
137 | LCD | LCD-DATA18 | LCD_DATA18 | PWM5_OUTCA7_MX6ULL_EVENTOCSI_DATA10EIM_DATA10GPIO3_IO23SRC_BT_CFG26USDHC2_CMDEPDC_BDR01 | LCD interface signal or universal GPIO with 3.3V logic levels. |
138 | LCD | LCD-DATA19 | LCD_DATA19 | PWM6_OUTWDOG1_WDOG_ANYCSI_DATA11EIM_DATA11GPIO3_IO24SRC_BT_CFG27USDHC2_CLKEPDC_VCOM00 | LCD interface signal or universal GPIO with 3.3V logic levels. |
139 | LCD | LCD-DATA13 | LCD_DATA13 | SAI3_TX_BCLKCSI_DATA21EIM_DATA05GPIO3_IO18SRC_BT_CFG13USDHC2_RESET_BEPDC_BDR00 | LCD interface signal or universal GPIO with 3.3V logic levels. |
140 | LCD | LCD-DATA20 | LCD_DATA20 | UART8_TXECSPI1_SCLKCSI_DATA12EIM_DATA12GPIO3_IO25SRC_BT_CFG28USDHC2_DATA0EPDC_VCOM01 | LCD interface signal or universal GPIO with 3.3V logic levels. |
141 | LCD | LCD-DATA14 | LCD_DATA14 | SAI3_RX_DATACSI_DATA22EIM_DATA06GPIO3_IO19SRC_BT_CFG14USDHC2_DATA4EPDC_SDSHR | LCD interface signal or universal GPIO with 3.3V logic levels. |
142 | LCD | LCD-DATA15 | LCD_DATA15 | SAI3_TX_DATACSI_DATA23EIM_DATA07GPIO3_IO20SRC_BT_CFG15USDHC2_DATA5EPDC_GDRL | LCD interface signal or universal GPIO with 3.3V logic levels. |
143 | LCD | LCD-DATA8 | LCD_DATA08 | SPDIF_INCSI_DATA16EIM_DATA00GPIO3_IO13SRC_BT_CFG08FLEXCAN1_TXEPDC_PWRIRQ | LCD interface signal or universal GPIO with 3.3V logic levels. |
144 | LCD | LCD-DATA16 | LCD_DATA16 | UART7_TXCSI_DATA01EIM_DATA08GPIO3_IO21SRC_BT_CFG24USDHC2_DATA6EPDC_GDCLK | LCD interface signal or universal GPIO with 3.3V logic levels. |
145 | LCD | LCD-DATA9 | LCD_DATA09 | SAI3_MCLKCSI_DATA17EIM_DATA01GPIO3_IO14SRC_BT_CFG09FLEXCAN1_RXEPDC_PWRWAKE | LCD interface signal or universal GPIO with 3.3V logic levels. |
146 | Power | GND | - | - | - |
147 | Power | GND | - | - | - |
148 | LCD | LCD-DATA11 | LCD_DATA11 | SAI3_RX_BCLKCSI_DATA19EIM_DATA03GPIO3_IO16SRC_BT_CFG11FLEXCAN2_RXEPDC_PWRSTAT | LCD interface signal or universal GPIO with 3.3V logic levels. |
149 | LCD | LCD-DATA5 | LCD_DATA05 | UART8_RTS_BENET2_1588_EVENT2_OUTSPDIF_OUTGPIO3_IO10SRC_BT_CFG05ECSPI1_SS1EPDC_SDDO05 | LCD interface signal or universal GPIO with 3.3V logic levels. |
150 | LCD | LCD-DATA12 | LCD_DATA12 | SAI3_TX_SYNCCSI_DATA20EIM_DATA04GPIO3_IO17SRC_BT_CFG12ECSPI1_RDYEPDC_PWRCTRL00 | LCD interface signal or universal GPIO with 3.3V logic levels. |
151 | LCD | LCD-DATA6 | LCD_DATA06 | UART7_CTS_BENET2_1588_EVENT3_INSPDIF_LOCKGPIO3_IO11SRC_BT_CFG06ECSPI1_SS2EPDC_SDDO06 | LCD interface signal or universal GPIO with 3.3V logic levels. |
152 | LCD | LCD-DATA10 | LCD_DATA10 | SAI3_RX_SYNCCSI_DATA18EIM_DATA02GPIO3_IO15SRC_BT_CFG10FLEXCAN2_TXEPDC_PWRCOM | LCD interface signal or universal GPIO with 3.3V logic levels. |
153 | LCD | LCD-DATA0 | LCD_DATA00 | PWM1_OUTENET1_1588_EVENT2_INI2C3_SDAGPIO3_IO05SRC_BT_CFG00SAI1_MCLKEPDC_SDDO00 | LCD interface signal or universal GPIO with 3.3V logic levels. |
154 | LCD | LCD-DATA3 | LCD_DATA03 | PWM4_OUTENET1_1588_EVENT3_OUTI2C4_SCLGPIO3_IO08SRC_BT_CFG03SAI1_RX_DATAEPDC_SDDO03 of | LCD interface signal or universal GPIO with 3.3V logic levels. |
155 | LCD | LCD-DATA1 | LCD_DATA01 | PWM2_OUTENET1_1588_EVENT2_OUTI2C3_SCLGPIO3_IO06SRC_BT_CFG01SAI1_TX_SYNCEPDC_SDDO01 | LCD interface signal or universal GPIO with 3.3V logic levels. |
156 | Power | GND | - | - | - |
157 | LCD | LCD-RESET | LCD_RESET | LCDIF_CSCA7_MX6ULL_EVENTISAI3_TX_DATAWDOG1_WDOG_ANYGPIO3_IO04ECSPI2_SS3EPDC_GDOE | LCD interface signal or universal GPIO with 3.3V logic levels. |
158 | LCD | LCD-DATA4 | LCD_DATA04 | UART8_CTS_BENET2_1588_EVENT2_INSPDIF_SR_CLKGPIO3_IO09SRC_BT_CFG04SAI1_TX_DATAEPDC_SDDO04 | LCD interface signal or universal GPIO with 3.3V logic levels. |
159 | Power | GND | - | - | - |
160 | LCD | LCD-HSYNC | LCD_HSYNC | LCDIF_RSUART4_CTS_BSAI3_TX_BCLKWDOG3_WDOG_RST_B_DEBGPIO3_IO02ECSPI2_SS1EPDC_SDOE | LCD interface signal or universal GPIO with 3.3V logic levels. |
161 | LCD | LCD-CLK | LCD_CLK | LCDIF_WR_RWNUART4_TXSAI3_MCLKEIM_CS2_BGPIO3_IO00WDOG1_WDOG_RST_B_DEBEPDC_SDCLK | LCD interface signal or universal GPIO with 3.3V logic levels. |
162 | LCD | LCD-VSYNC | LCD_VSYNC | LCDIF_BUSYUART4_RTS_BSAI3_RX_DATAWDOG2_WDOG_BGPIO3_IO03ECSPI2_SS2EPDC_SDCE00 | LCD interface signal or universal GPIO with 3.3V logic levels. |
163 | LCD | LCD-ENABLE | LCD_ENABLE | LCDIF_RD_EUART4_RXSAI3_TX_SYNCEIM_CS3_BGPIO3_IO01ECSPI2_RDYEPDC_SDLE | LCD interface signal or universal GPIO with 3.3V logic levels. |
164 | LCD | LCD-DATA2 | LCD_DATA02 | PWM3_OUTENET1_1588_EVENT3_INI2C4_SDAGPIO3_IO07SRC_BT_CFG02SAI1_TX_BCLKEPDC_SDDO02 | LCD interface signal or universal GPIO with 3.3V logic levels. |
165 | Power | GND | - | - | - |
166 | LCD | LCD-DATA7 | LCD_DATA07 | UART7_RTS_BENET2_1588_EVENT3_OUTSPDIF_EXT_CLKGPIO3_IO12SRC_BT_CFG07ECSPI1_SS3EPDC_SDDO07 | LCD interface signal or universal GPIO with 3.3V logic levels. |
167 | SDIO | SDIO1-D0 | SD1_DATA0 | GPT2_COMPARE3SAI2_TX_SYNCFLEXCAN1_TXEIM_ADDR21GPIO2_IO18ANATOP_OTG1_ID | SDIO interface signal or universal GPIO with 3.3V logic levels. |
168 | Power | GND | - | - | - |
169 | SDIO | SDIO1-D3 | SD1_DATA3 | GPT2_CAPTURE2SAI2_TX_DATAFLEXCAN2_RXEIM_ADDR24GPIO2_IO21CCM_CLKO2ANATOP_OTG2_ID | SDIO interface signal or universal GPIO with 3.3V logic levels. |
170 | Power | GND | - | - | - |
171 | SDIO | SDIO1-D1 | SD1_DATA1 | GPT2_CLKSAI2_TX_BCLKFLEXCAN1_RXEIM_ADDR22GPIO2_IO19USB_OTG2_PWR | SDIO interface signal or universal GPIO with 3.3V logic levels. |
172 | Power | GND | - | - | - |
173 | SDIO | SDIO1-CMD | SD1_CMD | GPT2_COMPARE1SAI2_RX_SYNCSPDIF_OUTEIM_ADDR19GPIO2_IO16SDMA_EXT_EVENT00USB_OTG1_PWR | SDIO interface signal or universal GPIO with 3.3V logic levels. |
174 | Power | GND | - | - | - |
175 | SDIO | SDIO1-D2 | SD1_DATA2 | GPT2_CAPTURE1SAI2_RX_DATAFLEXCAN2_TXEIM_ADDR23GPIO2_IO20CCM_CLKO1USB_OTG2_OC | SDIO interface signal or universal GPIO with 3.3V logic levels. |
176 | Power | GND | - | - | - |
177 | Power | GND | - | - | - |
178 | Power | GND | - | - | - |
179 | SDIO | SDIO1-CLK | SD1_CLK | GPT2_COMPARE2SAI2_MCLKSPDIF_INEIM_ADDR20GPIO2_IO17USB_OTG1_OC | SDIO interface signal or universal GPIO with 3.3V logic levels. |
180 | Power | GND | - | - | - |
181 | Power | GND | - | - | - |
182 | Power | GND | - | - | - |
183 | CSI | CSI-PIXCLK | CSI_PIXCLKBT-WAKE in SOM with WiFi/BT module | USDHC2_WPRAWNAND_CE3_BI2C1_SCLEIM_OEGPIO4_IO18SNVS_HP_VIO_5UART6_RXESAI_TX2_RX3 | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
184 | Power | GND | - | - | - |
185 | Power | GND | - | - | - |
186 | CSI | CSI-DATA6 | CSI_DATA06BT-PCM-OUT in SOM with WiFi/BT module | USDHC2_DATA6ECSPI1_MOSIEIM_AD06GPIO4_IO27SAI1_RX_DATAUSDHC1_RESET_BESAI_TX5_RX0 | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
187 | CSI | CSI-MCLK | CSI_MCLKBT-ENABLE in SOM with WiFi/BT module | USDHC2_CD_BRAWNAND_CE2_BI2C1_SDAEIM_CS0_BGPIO4_IO17SNVS_HP_VIO_5_CTLUART6_TXESAI_TX3_RX2 | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
188 | CSI | CSI-DATA7 | CSI_DATA07BT-PCM-IN in SOM with WiFi/BT module | USDHC2_DATA7ECSPI1_MISOEIM_AD07GPIO4_IO28SAI1_TX_DATAUSDHC1_VSELECTESAI_TX0 | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
189 | Power | GND | - | - | - |
190 | CSI | CSI-DATA5 | CSI_DATA05BT-PCM-CLK in SOM with WiFi/BT module | USDHC2_DATA5USDHC2_DATA5EIM_AD05GPIO4_IO26SAI1_TX_BCLKUSDHC1_CD_BESAI_TX_CLK | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
191 | CSI | CSI-DATA4 | CSI_DATA04BT-PCM-SYNC in SOM with WiFi/BT module | USDHC2_DATA4ECSPI1_SCLKEIM_AD04GPIO4_IO25SAI1_TX_SYNCUSDHC1_WPESAI_TX_FS | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
192 | CSI | CSI-DATA3 | CSI_DATA03BT-CTS in SOM with WiFi/BT module | USDHC2_DATA3ECSPI2_MISOEIM_AD03GPIO4_IO24SAI1_RX_BCLKUART5_CTS_BESAI_RX_CLK | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
193 | CSI | CSI-DATA1 | CSI_DATA01BT-TXD in SOM with WiFi/BT module | USDHC2_DATA1ECSPI2_SS0EIM_AD01GPIO4_IO22SAI1_MCLKUART5_RXESAI_RX_HF_CLK | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
194 | CSI | CSI-DATA2 | CSI_DATA02BT-RTS in SOM with WiFi/BT module | USDHC2_DATA2ECSPI2_MOSIEIM_AD02GPIO4_IO23SAI1_RX_SYNCUART5_RTS_BESAI_RX_FS | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
195 | CSI | CSI-DATA0 | CSI_DATA00BT-RXD in SOM with WiFi/BT module | USDHC2_DATA0ECSPI2_SCLKEIM_AD00GPIO4_IO21SRC_INT_BOOTUART5_TXESAI_TX_HF_CLK | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
196 | Power | CSI-VREF | - | - | Leave open if not used. |
197 | CSI | CSI-HSYNC | CSI_HSYNCWLAN-HWAKE in SOM with WiFi/BT module | USDHC2_CMDI2C2_SCLEIM_LBA_BGPIO4_IO20PWM8_OUTUART6_CTS_BESAI_TX1 | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
198 | CSI | CSI-VSYNC | CSI_VSYNCBT-HWAKE in SOM with WiFi/BT module | SDHC2_CLKI2C2_SDAEIM_RWGPIO4_IO19PWM7_OUTUART6_RTS_BESAI_TX4_RX1 | Video CMOS sensor signal or universal GPIO with 3.3V logic levels. |
199 | Power | GND | - | - | - |
200 | Power | GND | - | - | - |