Personal tools

Writing StarSBC-6ULL system image to eMMC memory

From SomLabs Wiki

Jump to: navigation, search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Writing system image to eMMC memory

Prerequisites

  • A complete package with NXP UUU application - uuu-visionsom-6ull.zip
  • Built and extracted system image file called image.wic (from Yocto build tmp/deploy/images/starsbc-6ull/somlabs-image-starsbc-6ull.wic.zst)
  • Built bootloader binary u-boot.imx (from Yocto build tmp/deploy/images/starsbc-6ull/u-boot.imx)

Information

The uuu-visionsom-6ull.zip archive contains the compiled NXP uuu binary for Linux, the commands script and the bootloader supporting fastboot command. The script requires the image.wic and u-boot.imx files to be in the same directory.


Programming StartSBC-6ULL eMMC memory

For image programing, use one of the following commands.

On Linux host: 

sudo ./uuu vsom-6ull-cmds

On Windows host: 

uuu.exe vsom-6ull-cmds

After the uuu tool stops and the following message is displayed: 

Wait for Known USB Device Appear...

connect the board to the PC using the microUSB port with connected pads on the bottom side of the module.

The pads need to be shortcuted until the uuu programming process starts.

After the process is done the board may be reset to start the programmed image.

Retrieved from "https://wiki.somlabs.com/index.php?title=Writing_StarSBC-6ULL_system_image_to_eMMC_memory&oldid=3007"