Personal tools

Difference between revisions of "Installing OpenSTLinux on VisionSOM-STM32MP1 with SD card"

From SomLabs Wiki

Jump to: navigation, search
(Created page with "{{PageHeader|Installing OpenSTLinux on VisionSOM-STM32MP1 with SD card}} The built system image file can be written to the SD card using the following command: <pre> sudo dd...")
 
 
Line 6: Line 6:
 
sudo dd if=<image .raw file> of=/dev/sdX bs=1M
 
sudo dd if=<image .raw file> of=/dev/sdX bs=1M
 
</pre>
 
</pre>
 +
 +
The ''/dev/sdX'' shall be changed according to the SD card device name.
  
 
In order to run the images from SD card the main board jumpers shall be set as follows (BOOT[0:2] = 101):
 
In order to run the images from SD card the main board jumpers shall be set as follows (BOOT[0:2] = 101):
  
 
[[File:Stm32mp1_sd_boot_jumpers.png|center|300px]]
 
[[File:Stm32mp1_sd_boot_jumpers.png|center|300px]]

Latest revision as of 16:52, 20 November 2020

Installing OpenSTLinux on VisionSOM-STM32MP1 with SD card


The built system image file can be written to the SD card using the following command:

sudo dd if=<image .raw file> of=/dev/sdX bs=1M

The /dev/sdX shall be changed according to the SD card device name.

In order to run the images from SD card the main board jumpers shall be set as follows (BOOT[0:2] = 101):

Stm32mp1 sd boot jumpers.png
NXP Partner ST Partner Renesas Partner