OpenSTLinux for VisionSOM-STM32MP1

OpenSTLinux for VisionSOM-STM32MP1

OpenSTLinux for VisionSOM-STM32MP1

---

VisionSOM-STM32MP1 module is supported by Yocto meta-layer available on SoMLabs github:

https://github.com/SoMLabs/openst-meta-somlabs

The described layer shall be used with the OpenSTLinux Distribution Package provided by the STMicroelectronics:

https://wiki.st.com/stm32mpu/wiki/STM32MP1_Distribution_Package

It provides the support for VisionSOM-STM32MP1 module and VisionCB-STD-STM32MP1 board and is intended for build with the st-image-weston system image.

Building the system image

The following steps are the summary of the image building description that can be found on the ST wiki pages with the additional SoMLabs meta-layer.

First let's clone all of the repositories containing the required packages and system distribution:

cd <working directory path>/Distribution-Package
mkdir openstlinux-4.19-thud-mp1-19-10-09 
cd openstlinux-4.19-thud-mp1-19-10-09
repo init -u https://github.com/STMicroelectronics/oe-manifest.git -b refs/tags/openstlinux-4.19-thud-mp1-19-10-09
repo sync
cd layers/meta-st
git clone https://github.com/SoMLabs/openst-meta-somlabs.git meta-somlabs
cd ../../

The last git clone instruction downloads the meta layer with VisionSOM-STM32MP1 module support. Now we can configure the environment and build the image by calling:

DISTRO=openstlinux-weston MACHINE=stm32mp157a-visionsom-mx source layers/meta-st/scripts/envsetup.sh
bitbake st-image-weston
cd tmp-glibc/deploy/images/stm32mp157a-visionsom-mx/scripts/
./create_sdcard_from_flashlayout.sh ../flashlayout_st-image-weston/FlashLayout_sdcard_stm32mp157a-visionsom-mx-basic.tsv

These commands generate the OpenSTLinux weston image that can be run on VisionSOM-STM32MP1 module and VisionCB-STD-STM32MP1 board. The image file flashlayout_st-image-weston_FlashLayout_sdcard_stm32mp157a-visionsom-mx-basic.raw is located in the tmp-glibc/deploy/images/stm32mp157a-visionsom-mx directory and can be copied directly to the SD card:

sudo dd if=tmp-glibc/deploy/images/stm32mp157a-visionsom-mx/flashlayout_st-image-weston_FlashLayout_sdcard_stm32mp157a-visionsom-mx-basic.raw of=/dev/sdX bs=1M

The /dev/sdX shall be changed according to the SD card device name.

Building the SDK

In order to build the cross-compiler and required libraries for software development on the host machine we need to build the SDK. After building the system image as described in the previous chapter we can simply call another bitbake command:

bitbake st-image-weston -c populate_sdk

It will create the SDK installer st-image-weston-openstlinux-weston-stm32mp157a-visionsom-mx-x86_64-toolchain-2.6-snapshot.sh that is located in the tmp-glibc/deploy/sdk directory directory. The installation script should be run on the host machine to install the development toolchain.