Personal tools

SL-ADP-PCIe-M2 Datasheet and Pinout

From SomLabs Wiki

Revision as of 11:34, 4 May 2021 by Piotrzbysinski (talk | contribs) (Ordering info)
Jump to: navigation, search

SL-ADP-PCIe-M2 M.2 PCIe mass storage adapter Datasheet and Pinout


General description

SL-ADP-PCIe-M2-ssd.png


SL-ADP-PCIe-M2 is adapter dedicated to using M.2 mass storage (SSD) in embedded systems based on i.MX8Mmini. The SL-ADP-PCIe-M2 module is equipped with FPC16 connector - the same like in SoMLabs carrier board VisionCB-8M-STD.

Features

  • Equipped with M.2 key M SSD socket
  • Single rail +3.3V power supply
  • SSD configuration via I2C
  • Dual lane PCIe communication interface
  • Operating temperature -30÷+85°C
  • Fully compatible with SoMLabs carrier boards equippped with PCIe interface on FPC16 connector
  • Built-in 32kHz clock source
  • Built-in two LEDs
  • Compatible with 2242, 2260 and 2280 modules
  • Connection with carrier board using FPC16 cable

Pictures

Note: the SSD module shown in the picture is not included in the SL-ADP-PCIe-M2 kit!

SL-ADP-PCIe-M2-2.jpg

SL-ADP-PCIe-M2-3.jpg

SL-ADP-PCIe-M2-4.jpg

SL-ADP-PCIe-M2-5.jpg

Ordering info

SL-ADP-PCIe-M2 - FPC 16-pin flat cable (A-A) is included.

Operating ranges

Parameter Value Unit Comment
Power Supply
3.3
V
Powered from carrier board
Current
0.16
A
Maximum peak value
Working temperature
-30…+70
oC -

Electrical parameters

Signal name Parameter Value Units
Min. Typ. Max.
+3.3V Supply Voltage 3.2 3.3 3.35 V
I3.3V Supply Current (3.3V) 0.11 .16 - mA
tPWRSEQ PMIC power-up time - 150 - ms
VIO I2C, RES, PWDN Input Voltage 0 3.3 3.5 V
fI2C I2C Controller Speed - - 400 kHz
RI2C I2C IOs Pull-up Resistance - 10 -
RPWDN Serial resistors voltage divider connected between FPC30 pin and PWDN input of OV5640 sensor - 2x10 -

MIPI-CSI (output) Pinout


SL-MIPI-CSI-OV5640-conn.png



FPC30 connector pin Function name Description
1 GND -
2 - -
3 - -
4 - -
5 - -
6 +3.3V Power supply
7 +3.3V Power supply
8 GND -
9 - -
10 PWDN OV5640 - Power Down input (active high, internal pull-down)
11 RESET OV5640 - Reset input (active low, internal pull-up)
12 GND -
13 SIOD_C SDA line of configuration I2C interface (internal pull-up)
14 SIO_D SCL line of configuration I2C interface (internal pull-up)
15 GND -
16 - -
17 - -
18 GND -
19 - -
20 - -
21 GND -
22 MDN1 CSI_DATA1_n
23 MDP1 CSI_DATA1_p
24 GND -
25 MDN0 CSI_DATA0_n
26 MDP0 CSI_DATA0_p
27 GND -
28 MCN CSI_CLK_n
29 MCP CSI_CLK_p
30 GND -

Dimensions


SL-MIPI-CSI-OV5640-dimension.png
NXP Partner ST Partner Renesas Partner