Personal tools

Difference between revisions of "SL-MIPI-CSI-OV5640 Datasheet and Pinout"

From SomLabs Wiki

Jump to: navigation, search
(Operating ranges)
(Electrical parameters)
Line 71: Line 71:
 
| Typ.
 
| Typ.
 
| Max.
 
| Max.
|-
 
| +5V
 
| Supply Voltage
 
| 4.75
 
| 5.0
 
| 5.25
 
| V
 
 
|-
 
|-
 
| +3.3V
 
| +3.3V

Revision as of 13:23, 30 April 2021

SL-MIPI-CSI-OV5640 5Mpx camera module with MIPI-CSI interface and OV5640 video sensor Datasheet and Pinout


General description

SL-MIPI-CSI-OV5640-1.png


SL-MIPI-CSI-OV5640 is the 5 Mpx color camera module. Module is equipped with MIPI-CSI interface and FPC30 connector therefore SL-MIPI-CSI-OV5640 module is matched to the SoMLabs carrier boards.
The SL-MIPI-CSI-OV5640 is equipped with OV5640 hi-res HD 5 Mpx CMOS video sensor. Video interface is dual lane MIPI-CSI interface and module supports electronic shutter mode: rolling shutter/frame exposure.
As a result of using advanced PMIC – SL1 – developed by SoMLabs, the SL-MIPI-CSI-OV5640 module is powered from single +3.3V line available in FPC connector.
The SL-MIPI-CSI-OV5640 is fully compatible with SoMLabs carrier boards equipped with MIPI-CSI connectors. By default SL-MIPI-CSI-OV5640 module is equipped with fish-eye (120º) lens.

Features

  • Based on OV5640 CMOS video chip
  • Resolution 2592 x 1944 px
  • Fish-eye lens (120º)
  • Output formats: 8/10-b RGB RAW
  • MIPI-CSI interface (2 lanes)
  • Typical frame rates:
  • QSXGA (2592×1944): 15 fps
    • 1080p: 30 fps
    • 1280×960: 45 fps
    • 720p: 60 fps
    • VGA (640×480): 90 fps
    • QVGA (320×240): 120 fps
  • Shutter: rolling/frame exposure
  • Single rail +3.3V power supply
  • Configuration via I2C
  • Operating temperature -30÷+70°C
  • Fully compatible with SoMLabs carrier boards equippped with MIPI-CSI interface (FPC30 connector)
  • Built-in clock source
  • Built-in SL1 PMIC (developed by SoMLabs)
  • Connection with carrier board using FPC30 cable

Pictures

SL-MIPI-CSI-OV5640-2.jpg

SL-MIPI-CSI-OV5640-3.jpg

SL-MIPI-CSI-OV5640-4.jpg

SL-MIPI-CSI-OV5640-5.jpg

Ordering info

SL-MIPI-CSI-OV5640 - FPC 30-pin flat cable (A-A) is included.

Operating ranges

Parameter Value Unit Comment
Power Supply
3.3
V
Powered from carrier board
Current
0.16
A
Maximum peak value
Environment temperature
-30…+70
oC -

Electrical parameters

Signal name Parameter Value Units
Min. Typ. Max.
+3.3V Supply Voltage 3.2 3.3 3.35 V
I5V Supply Current (5V) 40 80 100 mA
I3.3V Supply Current (3.3V) 1 2.2 8 mA
VIOI2C I2C Input Voltage 0 3.3 3.6 V
VIORES/SPDIF RES/SPDIF Input Voltage 0 3.3 3.6 V
fI2C I2C Controller Speed - - 400 kHz
RINT Interrupt Output Pull-up Resistance - 4.7 -
RI2C I2C IOs Pull-up Resistance - 4.7 -

MIPI-CSI (output) Pinout


SL-MIPI-CSI-OV5640-conn.png



FPC30 connector pin Function name Description
1 GND -
2 - -
3 HPD HPD line from HDMI (voltage translated to 3.3V)
4 +5V Power supply (input)
5 +5V Power supply (input)
6 +3.3V Power supply (input)
7 +3.3V Power supply (input)
8 GND -
9 SPDIF-TX SPDIF input from SBC
10 INT Interrupt output (voltage translated to 3.3V)
11 RESET Reset input (voltage translated to 3.3V)
12 GND -
13 SDA I2C SDA line (voltage translated to 3.3V)
14 SCL I2C SCL line (voltage translated to 3.3V)
15 GND -
16 D3n MIPI-DSI lane 3 negative line
17 D3p MIPI-DSI lane 3 positive line
18 GND -
19 D2n MIPI-DSI lane 2 negative line
20 D2p MIPI-DSI lane 2 positive line
21 GND -
22 D1n MIPI-DSI lane 1 negative line
23 D1p MIPI-DSI lane 1 positive line
24 GND -
25 D0n MIPI-DSI lane 0 negative line
26 D0p MIPI-DSI lane 0 positive line
27 GND -
28 CLKn MIPI-DSI clock negative line
29 CLKp MIPI-DSI clock positive line
30 GND -

Dimensions


SL-MIPI-CSI-OV5640-dimension.png
NXP Partner ST Partner Renesas Partner