Difference between revisions of "SL-MIPI-LVDS-HDMI-CNV"
From SomLabs Wiki
| Line 19: | Line 19: | ||
| | | | ||
content=  | content=  | ||
| − | *[[SL- | + | *[[SL-MIPI-LVDS-HDMI-CNV-11 Datasheet and Pinout|Datasheet and Pinout]] |
__WP_Files(1958) | __WP_Files(1958) | ||
}} | }} | ||
}} | }} | ||
Revision as of 13:18, 30 September 2020
| SL-MIPI-LVDS-HDMI-CNV |
|
SL-MIPI-HDMI-LVDS-CNV module is hardware MIPI-DSI to LVDS and/or HDMI display converter. Module integrates D-PHY1.1 (DSI1.02) with 1 up to 4 MIPI input data lanes, and is fully compatible with MIPI-DSI data packets: 18bpp, RGB666 and 24bpp RGB888. Maximum input bandwidth up tp 6Gb/s (4 lanes), LVDS output clocking up to 154 MHz. SL-MIPI-LVDS-HDMI-CNV module is fully compatible with SoMLabs carrier board: |
| Specifications |
| Diagonal | 7 inch |
| Size | 800x480 pixels |
| Display Area | 154.99 x 85.92 mm |
| Interface | MIPI-DSI (In)/HDMI/LVDS (Out) |
| Touch Panel Type | capactitive |
| Touch Panel Controller | FT5426 (I2C) |
| Temperature Range | -20 to +70°C |
| Dimensions | 192.96 x 110.76 x 10.8 mm |
| Backlight | built-in LED |
| Display Model | Powertip PH800480T013-IBC15 |
| Power Supply | single +5V (max. 400mA) |
