Difference between revisions of "SL-MIPI-LVDS-HDMI-CNV"
From SomLabs Wiki
| Line 1: | Line 1: | ||
{{Product|category1=SOM|category2=|image=sl-mipi-lvds-hdmi-cnv-v11-angle.png | {{Product|category1=SOM|category2=|image=sl-mipi-lvds-hdmi-cnv-v11-angle.png | ||
| − | | | + | |adapter_in_port=MIPI-DSI |
| − | | | + | |adapter_in_lane=1...4 |
| − | | | + | |adapter_out_port=LVDS and HDMI |
| + | |adapter_out_lane=4 | ||
| + | |adapter_in_connector=FPC30 (SoMLabs standard) | ||
|interface= MIPI-DSI (In)/HDMI/LVDS (Out) | |interface= MIPI-DSI (In)/HDMI/LVDS (Out) | ||
|tp=capactitive | |tp=capactitive | ||
Revision as of 16:00, 30 September 2020
| SL-MIPI-LVDS-HDMI-CNV |
|
SL-MIPI-HDMI-LVDS-CNV module is hardware MIPI-DSI to LVDS and/or HDMI display converter. Module integrates D-PHY1.1 (DSI1.02) with 1 up to 4 MIPI input data lanes, and is fully compatible with MIPI-DSI data packets: 18bpp, RGB666 and 24bpp RGB888. Maximum input bandwidth up tp 6Gb/s (4 lanes), LVDS output clocking up to 154 MHz. SL-MIPI-LVDS-HDMI-CNV module is fully compatible with SoMLabs carrier board: |
Documentation
| Specifications |
| Interface | MIPI-DSI (In)/HDMI/LVDS (Out) |
| Touch Panel Type | capactitive |
| Touch Panel Controller | FT5426 (I2C) |
| Input Port | MIPI-DSI |
| Output Port | LVDS and HDMI |
| Input Connector | FPC30 (SoMLabs standard) |
| Input Lane | 1...4 |
| Output Lane | 4 |
| Temperature Range | -20 to +70°C |
| Dimensions | 192.96 x 110.76 x 10.8 mm |
| Backlight | built-in LED |
| Display Model | Powertip PH800480T013-IBC15 |
| Power Supply | single +5V (max. 400mA) |
