Difference between revisions of "SL-MIPI-LVDS-HDMI-CNV-11 Datasheet and Pinout"
From SomLabs Wiki
(→MIPI-DSI (input)Pinout) |
|||
Line 133: | Line 133: | ||
|} | |} | ||
− | == MIPI-DSI (input)Pinout == | + | == MIPI-DSI (input) Pinout == |
+ | [[File:sl-mipi-lvds-hdmi-cnv-MIPI-conn.png|center]] | ||
+ | <br /> | ||
+ | <br> | ||
+ | {| class="wikitable" | ||
+ | ! style="text-align: center; font-weight: bold;" | FPC30 connector pin | ||
+ | ! style="text-align: center; font-weight: bold;" | Function name | ||
+ | ! style="text-align: center; font-weight: bold;" | Description | ||
+ | |- | ||
+ | | 1 | ||
+ | | GND | ||
+ | | - | ||
+ | |- | ||
+ | | 2 | ||
+ | | - | ||
+ | | - | ||
+ | |- | ||
+ | | 3 | ||
+ | | HPD | ||
+ | | HPD line from HDMI (voltage translated to 3.3V) | ||
+ | |- | ||
+ | | 4 | ||
+ | | +5V | ||
+ | | Power supply (input) | ||
+ | |- | ||
+ | | 5 | ||
+ | | +5V | ||
+ | | Power supply (input) | ||
+ | |- | ||
+ | | 6 | ||
+ | | +3.3V | ||
+ | | Power supply (input) | ||
+ | |- | ||
+ | | 7 | ||
+ | | +3.3V | ||
+ | | Power supply (input) | ||
+ | |- | ||
+ | | 8 | ||
+ | | GND | ||
+ | | - | ||
+ | |- | ||
+ | | 9 | ||
+ | | SPDIF-TX | ||
+ | | SPDIF input from SBC | ||
+ | |- | ||
+ | | 10 | ||
+ | | INT | ||
+ | | Interrupt output (voltage translated to 3.3V) | ||
+ | |- | ||
+ | | 11 | ||
+ | | RESET | ||
+ | | Reset input (voltage translated to 3.3V) | ||
+ | |- | ||
+ | | 12 | ||
+ | | GND | ||
+ | | - | ||
+ | |- | ||
+ | | 13 | ||
+ | | SDA | ||
+ | | I2C SDA line (voltage translated to 3.3V) | ||
+ | |- | ||
+ | | 14 | ||
+ | | SCL | ||
+ | | I2C SCL line (voltage translated to 3.3V) | ||
+ | |- | ||
+ | | 15 | ||
+ | | GND | ||
+ | | - | ||
+ | |- | ||
+ | | 16 | ||
+ | | D3n | ||
+ | | MIPI-DSI lane 3 negative line | ||
+ | |- | ||
+ | | 17 | ||
+ | | D3p | ||
+ | | MIPI-DSI lane 3 positive line | ||
+ | |- | ||
+ | | 18 | ||
+ | | GND | ||
+ | | - | ||
+ | |- | ||
+ | | 19 | ||
+ | | D2n | ||
+ | | MIPI-DSI lane 2 negative line | ||
+ | |- | ||
+ | | 20 | ||
+ | | D2p | ||
+ | | MIPI-DSI lane 2 positive line | ||
+ | |- | ||
+ | | 21 | ||
+ | | GND | ||
+ | | - | ||
+ | |- | ||
+ | | 22 | ||
+ | | D1n | ||
+ | | MIPI-DSI lane 1 negative line | ||
+ | |- | ||
+ | | 23 | ||
+ | | D1p | ||
+ | | MIPI-DSI lane 1 positive line | ||
+ | |- | ||
+ | | 24 | ||
+ | | GND | ||
+ | | - | ||
+ | |- | ||
+ | | 25 | ||
+ | | D0n | ||
+ | | MIPI-DSI lane 0 negative line | ||
+ | |- | ||
+ | | 26 | ||
+ | | D0p | ||
+ | | MIPI-DSI lane 0 positive line | ||
+ | |- | ||
+ | | 27 | ||
+ | | GND | ||
+ | | - | ||
+ | |- | ||
+ | | 28 | ||
+ | | CLKn | ||
+ | | MIPI-DSI clock negative line | ||
+ | |- | ||
+ | | 29 | ||
+ | | CLKp | ||
+ | | MIPI-DSI clock positive line | ||
+ | |- | ||
+ | | 30 | ||
+ | | GND | ||
+ | | - | ||
+ | |} | ||
+ | |||
+ | == LVDS (output) Pinout == | ||
[[File:sl-mipi-lvds-hdmi-cnv-MIPI-conn.png|center]] | [[File:sl-mipi-lvds-hdmi-cnv-MIPI-conn.png|center]] | ||
<br /> | <br /> |
Revision as of 15:12, 30 September 2020
SL-MIPI-LVDS-HDMI-CNV MIPI-DSI to LVDS and HDMI converter Datasheet and Pinout
Contents
General description
SL-MIPI-LVDS-HDMI-CNV (MIPI-DSI to LVDS HDMI converter) is flexible MIPI-DSI to LVDS and/or HDMI converter. The solution we dedicate to SoMLabs carrier boards equipped with MIPI-DSI interface (with FPC30 connector). Converter is fully compliant with DSI1.02 and HDMI1.4 and converts video stream up to 1080p @60Hz/8b.
SL-MIPI-LVDS-HDMI-CNV is fully compatible with SoMLabs carrier borads equipeed with MIPI-CSI FPC30 connector.
Features
- MIPI-DSI to LVDS and/or HDMI display converter
- Integrated D-PHY1.1 (DSI1.02)
- From 1 up to 4 MIPI input data lanes
- Compatible with MIPI-DSI data packets: 18bpp, RGB666 and 24bpp RGB888
- Input bandwidth up tp 6Gb/s (4 lanes)
- LVDS output clocking up to 154 MHz
- Fully compatible with SoMLabs carrier board:
- VisionCB-8M-STD (dedicated to i.MX8M mini multicore MPU)
- VisionCB-STM32MP1-STD (dedicated to STM32MP1 multicore MPU)
- Plug & Play solution for SoMLabs customers
- Integrated stereo audio channel
- Connection with carrier board using FPC30 cable A-A type
Pictures
Ordering info
SL-MIPI-LVDS-HDMI-CNV - FPC 30-pin flat cable (A-A) is included.
Operating ranges
Parameter | Value | Unit | Comment |
---|---|---|---|
Power Supply | |
|
Powered from carrier board |
Current | |
|
Maximum peak value |
Environment temperature | oC | - |
Electrical parameters
Signal name | Parameter | Value | Units | ||
---|---|---|---|---|---|
Min. | Typ. | Max. | |||
+5V | Supply Voltage | 4.0 | 5.0 | 5.5 | V |
- | Total Supply Current | 230 | 330 | 400 | mA |
VIO | Video IO Input Voltage | 0 | 3.3 | 3.6 | V |
VTPIO | TP Controller IO Voltage | 0 | 3.3 | 3.6 | V |
VPWREN | Power Enable Input Voltage | 0 | - | 5.5 | V |
fTPI2C | TP Controller I2C Speed | - | - | 400 | kHz |
fPWM | PWM Dimming Frequency | - | - | 1 | kHz |
RINT | Interrupt Output Pull-up Resistance | - | 10 | - | kΩ |
RPWREN | Power Enable Pull-up Resistance | - | 10 | - | kΩ |
RTPI2C | Touch Panel Controller I2C IOs Pull-up Resistance | - | 2.2 | - | kΩ |
MIPI-DSI (input) Pinout
FPC30 connector pin | Function name | Description |
---|---|---|
1 | GND | - |
2 | - | - |
3 | HPD | HPD line from HDMI (voltage translated to 3.3V) |
4 | +5V | Power supply (input) |
5 | +5V | Power supply (input) |
6 | +3.3V | Power supply (input) |
7 | +3.3V | Power supply (input) |
8 | GND | - |
9 | SPDIF-TX | SPDIF input from SBC |
10 | INT | Interrupt output (voltage translated to 3.3V) |
11 | RESET | Reset input (voltage translated to 3.3V) |
12 | GND | - |
13 | SDA | I2C SDA line (voltage translated to 3.3V) |
14 | SCL | I2C SCL line (voltage translated to 3.3V) |
15 | GND | - |
16 | D3n | MIPI-DSI lane 3 negative line |
17 | D3p | MIPI-DSI lane 3 positive line |
18 | GND | - |
19 | D2n | MIPI-DSI lane 2 negative line |
20 | D2p | MIPI-DSI lane 2 positive line |
21 | GND | - |
22 | D1n | MIPI-DSI lane 1 negative line |
23 | D1p | MIPI-DSI lane 1 positive line |
24 | GND | - |
25 | D0n | MIPI-DSI lane 0 negative line |
26 | D0p | MIPI-DSI lane 0 positive line |
27 | GND | - |
28 | CLKn | MIPI-DSI clock negative line |
29 | CLKp | MIPI-DSI clock positive line |
30 | GND | - |
LVDS (output) Pinout
FPC30 connector pin | Function name | Description |
---|---|---|
1 | GND | - |
2 | - | - |
3 | HPD | HPD line from HDMI (voltage translated to 3.3V) |
4 | +5V | Power supply (input) |
5 | +5V | Power supply (input) |
6 | +3.3V | Power supply (input) |
7 | +3.3V | Power supply (input) |
8 | GND | - |
9 | SPDIF-TX | SPDIF input from SBC |
10 | INT | Interrupt output (voltage translated to 3.3V) |
11 | RESET | Reset input (voltage translated to 3.3V) |
12 | GND | - |
13 | SDA | I2C SDA line (voltage translated to 3.3V) |
14 | SCL | I2C SCL line (voltage translated to 3.3V) |
15 | GND | - |
16 | D3n | MIPI-DSI lane 3 negative line |
17 | D3p | MIPI-DSI lane 3 positive line |
18 | GND | - |
19 | D2n | MIPI-DSI lane 2 negative line |
20 | D2p | MIPI-DSI lane 2 positive line |
21 | GND | - |
22 | D1n | MIPI-DSI lane 1 negative line |
23 | D1p | MIPI-DSI lane 1 positive line |
24 | GND | - |
25 | D0n | MIPI-DSI lane 0 negative line |
26 | D0p | MIPI-DSI lane 0 positive line |
27 | GND | - |
28 | CLKn | MIPI-DSI clock negative line |
29 | CLKp | MIPI-DSI clock positive line |
30 | GND | - |