Personal tools

Difference between revisions of "SL-MIPI-LVDS-HDMI-CNV-11 Datasheet and Pinout"

From SomLabs Wiki

Jump to: navigation, search
(→‎MIPI-DSI (input)Pinout)
(→‎General description)
 
(26 intermediate revisions by the same user not shown)
Line 5: Line 5:
 
<br>  
 
<br>  
 
SL-MIPI-LVDS-HDMI-CNV (MIPI-DSI to LVDS HDMI converter) is flexible MIPI-DSI to LVDS and/or HDMI converter. The solution we dedicate to SoMLabs carrier boards equipped with MIPI-DSI interface (with FPC30 connector). Converter is fully compliant with DSI1.02 and HDMI1.4 and converts video stream up to 1080p @60Hz/8b.
 
SL-MIPI-LVDS-HDMI-CNV (MIPI-DSI to LVDS HDMI converter) is flexible MIPI-DSI to LVDS and/or HDMI converter. The solution we dedicate to SoMLabs carrier boards equipped with MIPI-DSI interface (with FPC30 connector). Converter is fully compliant with DSI1.02 and HDMI1.4 and converts video stream up to 1080p @60Hz/8b.
−
SL-MIPI-LVDS-HDMI-CNV is fully compatible with SoMLabs carrier borads equipeed with MIPI-CSI FPC30 connector.
+
SL-MIPI-LVDS-HDMI-CNV is fully compatible with SoMLabs carrier borads equipeed with MIPI-DSI FPC30 connector.
  
 
== Features ==
 
== Features ==
Line 23: Line 23:
 
== Pictures ==
 
== Pictures ==
 
[[File:sl-mipi-lvds-hdmi-cnv-v11-angle-OK.jpg|800px|center]]<br>
 
[[File:sl-mipi-lvds-hdmi-cnv-v11-angle-OK.jpg|800px|center]]<br>
 +
[[File:sl-mipi-lvds-hdmi-cnv-v11-CB1.jpg|800px|center]]<br>
 +
[[File:sl-mipi-lvds-hdmi-cnv-v11-CB2.jpg|800px|center]]<br>
 
[[File:sl-mipi-lvds-hdmi-cnv-v11.jpg|800px|center]]<br>
 
[[File:sl-mipi-lvds-hdmi-cnv-v11.jpg|800px|center]]<br>
  
Line 36: Line 38:
 
|-
 
|-
 
| Power Supply
 
| Power Supply
−
| <center>5.0</center>
+
| <center>3.3 & 5.0</center>
 
| <center>V</center>
 
| <center>V</center>
 
| Powered from carrier board
 
| Powered from carrier board
Line 64: Line 66:
 
| +5V
 
| +5V
 
| Supply Voltage
 
| Supply Voltage
−
| 4.0
+
| 4.75
 
| 5.0
 
| 5.0
−
| 5.5
+
| 5.25
 
| V
 
| V
 
|-
 
|-
−
| -
+
| +3.3V
−
| Total Supply Current
+
| Supply Voltage
−
| 230
+
| 3.2
−
| 330
+
| 3.3
−
| 400
+
| 3.35
 +
| V
 +
|-
 +
| I<sub>5V</sub>
 +
| Supply Current (5V)
 +
| 40
 +
| 80
 +
| 100
 +
| mA
 +
|-
 +
| I<sub>3.3V</sub>
 +
| Supply Current (3.3V)
 +
| 1
 +
| 2.2
 +
| 8
 
| mA
 
| mA
 
|-
 
|-
−
| VIO
+
| VIO<sub>I2C</sub>
−
| Video IO Input Voltage
+
| I2C Input Voltage  
 
| 0
 
| 0
 
| 3.3
 
| 3.3
Line 83: Line 99:
 
| V
 
| V
 
|-
 
|-
−
| V<sub>TPIO</sub>
+
| VIO<sub>RES/SPDIF</sub>
−
| TP Controller IO Voltage
+
| RES/SPDIF Input Voltage  
 
| 0
 
| 0
 
| 3.3
 
| 3.3
Line 90: Line 106:
 
| V
 
| V
 
|-
 
|-
−
| V<sub>PWREN</sub>
+
| f<sub>I2C</sub>
−
| Power Enable Input Voltage
+
| I2C Controller Speed
−
| 0
 
−
| -
 
−
| 5.5
 
−
| V
 
−
|-
 
−
| f<sub>TPI2C</sub>
 
−
| TP Controller I2C Speed
 
 
| -
 
| -
 
| -
 
| -
 
| 400
 
| 400
−
| kHz
 
−
|-
 
−
| f<sub>PWM</sub>
 
−
| PWM Dimming Frequency
 
−
| -
 
−
| -
 
−
| 1
 
 
| kHz
 
| kHz
 
|-
 
|-
Line 114: Line 116:
 
| Interrupt Output Pull-up Resistance
 
| Interrupt Output Pull-up Resistance
 
| -
 
| -
−
| 10
+
| 4.7
−
| -
 
−
| kΩ
 
−
|-
 
−
| R<sub>PWREN</sub>
 
−
| Power Enable Pull-up Resistance
 
−
| -
 
−
| 10
 
 
| -
 
| -
 
| kΩ
 
| kΩ
 
|-
 
|-
−
| R<sub>TPI2C</sub>
+
| R<sub>I2C</sub>
−
| Touch Panel Controller I2C IOs Pull-up Resistance
+
| I2C IOs Pull-up Resistance
 
| -
 
| -
−
| 2.2
+
| 4.7
 
| -
 
| -
 
| kΩ
 
| kΩ
 
|}
 
|}
  
−
== MIPI-DSI (input)Pinout ==
+
== MIPI-DSI (input) Pinout ==
 +
<br>
 
[[File:sl-mipi-lvds-hdmi-cnv-MIPI-conn.png|center]]
 
[[File:sl-mipi-lvds-hdmi-cnv-MIPI-conn.png|center]]
 
<br />
 
<br />
Line 152: Line 148:
 
| 3
 
| 3
 
| HPD
 
| HPD
−
| HPD line from HDMI (voltage translated)
+
| HPD line from HDMI (voltage translated to 3.3V)
 
|-
 
|-
 
| 4
 
| 4
Line 180: Line 176:
 
| 10
 
| 10
 
| INT
 
| INT
−
| Interrupt output (voltage translated)
+
| Interrupt output (voltage translated to 3.3V)
 
|-
 
|-
 
| 11
 
| 11
−
| G1
+
| RESET
−
| Green 1 input
+
| Reset input (voltage translated to 3.3V)
 
|-
 
|-
 
| 12
 
| 12
−
| G2
+
| GND
−
| Green 2 input
+
| -
 
|-
 
|-
 
| 13
 
| 13
−
| G3
+
| SDA
−
| Green 3 input
+
| I2C SDA line (voltage translated to 3.3V)
 
|-
 
|-
 
| 14
 
| 14
−
| G4
+
| SCL
−
| Green 4 input
+
| I2C SCL line (voltage translated to 3.3V)
 
|-
 
|-
 
| 15
 
| 15
−
| G5
+
| GND
−
| Green 5 input
+
| -
 
|-
 
|-
 
| 16
 
| 16
−
| G6
+
| D3n
−
| Green 6 input
+
| MIPI-DSI lane 3 negative line
 
|-
 
|-
 
| 17
 
| 17
−
| G7
+
| D3p
−
| Green 7 input
+
| MIPI-DSI lane 3 positive line
 
|-
 
|-
 
| 18
 
| 18
 
| GND
 
| GND
−
| Power supply
+
| -
 
|-
 
|-
 
| 19
 
| 19
−
| R0
+
| D2n
−
| Red 0 input
+
| MIPI-DSI lane 2 negative line
 
|-
 
|-
 
| 20
 
| 20
−
| R1
+
| D2p
−
| Red 1 input
+
| MIPI-DSI lane 2 positive line
 
|-
 
|-
 
| 21
 
| 21
−
| R2
+
| GND
−
| Red 2 input
+
| -
 
|-
 
|-
 
| 22
 
| 22
−
| R3
+
| D1n
−
| Red 3 input
+
| MIPI-DSI lane 1 negative line
 
|-
 
|-
 
| 23
 
| 23
−
| R4
+
| D1p
−
| Red 4 input
+
| MIPI-DSI lane 1 positive line
 
|-
 
|-
 
| 24
 
| 24
−
| R5
+
| GND
−
| Red 5 input
+
| -
 
|-
 
|-
 
| 25
 
| 25
−
| R6
+
| D0n
−
| Red 6 input
+
| MIPI-DSI lane 0 negative line
 
|-
 
|-
 
| 26
 
| 26
−
| R7
+
| D0p
−
| Red 7 input
+
| MIPI-DSI lane 0 positive line
 
|-
 
|-
 
| 27
 
| 27
 
| GND
 
| GND
−
| Power supply
+
| -
 
|-
 
|-
 
| 28
 
| 28
−
| DE
+
| CLKn
−
| DE display controller input
+
| MIPI-DSI clock negative line
 
|-
 
|-
 
| 29
 
| 29
−
| HSYNC
+
| CLKp
−
| HSYNC display controller input
+
| MIPI-DSI clock positive line
 
|-
 
|-
 
| 30
 
| 30
−
| VSYNC
 
−
| VSYNC display controller input
 
−
|-
 
−
| 31
 
 
| GND
 
| GND
−
| Power supply
+
| -
 +
|}
 +
 
 +
== LVDS (output) Pinout ==
 +
<br>
 +
[[File:sl-mipi-lvds-hdmi-cnv-LVDS-conn.png|center]]
 +
<br />
 +
<br>
 +
{| class="wikitable"
 +
! style="text-align: center; font-weight: bold;" | LVDS connector pin
 +
! style="text-align: center; font-weight: bold;" | Function name
 +
! style="text-align: center; font-weight: bold;" | Description
 
|-
 
|-
−
| 32
+
| 1
−
| DCLK
+
| +5V
−
| Main clock input (display controller)
+
| Power supply for external devices (max. 20 mA)<br>Internally connected with pin 2
 
|-
 
|-
−
| 33
+
| 2
−
| GND
+
| +5V
−
| Power supply
+
| Power supply for external devices (max. 20 mA)<br>Internally connected with pin 1
 
|-
 
|-
−
| 34
+
| 3
 
| -
 
| -
 
| -
 
| -
 
|-
 
|-
−
| 35
+
| 4
 +
| GND
 
| -
 
| -
 +
|-
 +
| 5
 +
| GND
 
| -
 
| -
 
|-
 
|-
−
| 36
+
| 6
−
| nINT
+
| GND
−
| Touch-panel controller interrupt output (OC with 10kΩ pull-up)
+
| -
 
|-
 
|-
−
| 37
+
| 7
−
| GPIO1
+
| D0n
−
| PWM signal input for backlight control (leave open if not used)
+
| LVDS D0n data line
 
|-
 
|-
−
| 38
+
| 8
−
| -
+
| D0p
−
| -
+
| LVDS D0p data line
 
|-
 
|-
−
| 39
+
| 9
−
| -
+
| D1n
−
| -
+
| LVDS D1n data line
 
|-
 
|-
−
| 40
+
| 10
−
| -
+
| D1p
−
| -
+
| LVDS D1p data line
 
|-
 
|-
−
| 41
+
| 11
−
| -
+
| D2n
−
| -
+
| LVDS D2n data line
 
|-
 
|-
−
| 42
+
| 12
−
| SCL
+
| D2p
−
| Touch-panel controller SCL input (with 2.2kΩ pull-up)
+
| LVDS D2p data line
 
|-
 
|-
−
| 43
+
| 13
−
| SDA
+
| GND
−
| Touch-panel controller SDA IO (with 2.2kΩ pull-up)
+
| -
 
|-
 
|-
−
| 44
+
| 14
 
| GND
 
| GND
−
| Power supply
+
| -
 
|-
 
|-
−
| 45
+
| 15
−
| NC
+
| CLKn
−
| No external connections!
+
| LVDS CLKn clock line
 
|-
 
|-
−
| 46
+
| 16
−
| NC
+
| CLKp
−
| No external connections!
+
| LVDS CLKp clock line
 
|-
 
|-
−
| 47
+
| 17
−
| +5V
+
| D3n
−
| Power supply
+
| LVDS D3n data line
 
|-
 
|-
−
| 48
+
| 18
−
| +5V
+
| D3p
−
| Power supply
+
| LVDS D3p data line
−
|-
 
−
| 49
 
−
| nRES_TP
 
−
| Touch-panel controller reset signal
 
−
|-
 
−
| 50
 
−
| PWREN
 
−
| Backlight LEDs on/off, with 10kΩ pull-up resisitor (level +5V).<br />If PWREN pin is open or connected to "1" - LEDs are on.
 
 
|}
 
|}
 +
 +
== HDMI (output) Pinout ==
 +
<br>
 +
[[File:sl-mipi-lvds-hdmi-cnv-HDMI-conn.png|center]]
 +
<br />
 +
HDMI connector built-in SL-MIPI-LVDS-HDMI-CNV converter has standard HDMI pinout.
  
 
== Dimensions ==
 
== Dimensions ==
 +
<br>
 
[[File:sl-mipi-lvds-hdmi-cnv-dimension.png|center]]
 
[[File:sl-mipi-lvds-hdmi-cnv-dimension.png|center]]

Latest revision as of 15:45, 30 October 2023

SL-MIPI-LVDS-HDMI-CNV MIPI-DSI to LVDS and HDMI converter Datasheet and Pinout

General description

Sl-mipi-lvds-hdmi-cnv-v11.jpg


SL-MIPI-LVDS-HDMI-CNV (MIPI-DSI to LVDS HDMI converter) is flexible MIPI-DSI to LVDS and/or HDMI converter. The solution we dedicate to SoMLabs carrier boards equipped with MIPI-DSI interface (with FPC30 connector). Converter is fully compliant with DSI1.02 and HDMI1.4 and converts video stream up to 1080p @60Hz/8b. SL-MIPI-LVDS-HDMI-CNV is fully compatible with SoMLabs carrier borads equipeed with MIPI-DSI FPC30 connector.

Features

  • MIPI-DSI to LVDS and/or HDMI display converter
  • Integrated D-PHY1.1 (DSI1.02)
  • From 1 up to 4 MIPI input data lanes
  • Compatible with MIPI-DSI data packets: 18bpp, RGB666 and 24bpp RGB888
  • Input bandwidth up tp 6Gb/s (4 lanes)
  • LVDS output clocking up to 154 MHz
  • Fully compatible with SoMLabs carrier board:
    • VisionCB-8M-STD (dedicated to i.MX8M mini multicore MPU)
    • VisionCB-STM32MP1-STD (dedicated to STM32MP1 multicore MPU)
  • Plug & Play solution for SoMLabs customers
  • Integrated stereo audio channel
  • Connection with carrier board using FPC30 cable A-A type

Pictures

Sl-mipi-lvds-hdmi-cnv-v11-angle-OK.jpg

Sl-mipi-lvds-hdmi-cnv-v11-CB1.jpg

Sl-mipi-lvds-hdmi-cnv-v11-CB2.jpg

Sl-mipi-lvds-hdmi-cnv-v11.jpg

Ordering info

SL-MIPI-LVDS-HDMI-CNV - FPC 30-pin flat cable (A-A) is included.

Operating ranges

Parameter Value Unit Comment
Power Supply
3.3 & 5.0
V
 Powered from carrier board
Current
0.1
A
 Maximum peak value
Environment temperature
-40…+85
 oC -

Electrical parameters

Signal name Parameter Value Units
Min. Typ. Max.
+5V Supply Voltage 4.75 5.0 5.25 V
+3.3V Supply Voltage 3.2 3.3 3.35 V
I5V Supply Current (5V) 40 80 100 mA
I3.3V Supply Current (3.3V) 1 2.2 8 mA
VIOI2C I2C Input Voltage 0 3.3 3.6 V
VIORES/SPDIF RES/SPDIF Input Voltage 0 3.3 3.6 V
fI2C I2C Controller Speed - - 400 kHz
RINT Interrupt Output Pull-up Resistance - 4.7 - kΩ
RI2C I2C IOs Pull-up Resistance - 4.7 - kΩ

MIPI-DSI (input) Pinout


Sl-mipi-lvds-hdmi-cnv-MIPI-conn.png



FPC30 connector pin Function name Description
1 GND -
2 - -
3 HPD HPD line from HDMI (voltage translated to 3.3V)
4 +5V Power supply (input)
5 +5V Power supply (input)
6 +3.3V Power supply (input)
7 +3.3V Power supply (input)
8 GND -
9 SPDIF-TX SPDIF input from SBC
10 INT Interrupt output (voltage translated to 3.3V)
11 RESET Reset input (voltage translated to 3.3V)
12 GND -
13 SDA I2C SDA line (voltage translated to 3.3V)
14 SCL I2C SCL line (voltage translated to 3.3V)
15 GND -
16 D3n MIPI-DSI lane 3 negative line
17 D3p MIPI-DSI lane 3 positive line
18 GND -
19 D2n MIPI-DSI lane 2 negative line
20 D2p MIPI-DSI lane 2 positive line
21 GND -
22 D1n MIPI-DSI lane 1 negative line
23 D1p MIPI-DSI lane 1 positive line
24 GND -
25 D0n MIPI-DSI lane 0 negative line
26 D0p MIPI-DSI lane 0 positive line
27 GND -
28 CLKn MIPI-DSI clock negative line
29 CLKp MIPI-DSI clock positive line
30 GND -

LVDS (output) Pinout


Sl-mipi-lvds-hdmi-cnv-LVDS-conn.png



LVDS connector pin Function name Description
1 +5V Power supply for external devices (max. 20 mA)
Internally connected with pin 2
2 +5V Power supply for external devices (max. 20 mA)
Internally connected with pin 1
3 - -
4 GND -
5 GND -
6 GND -
7 D0n LVDS D0n data line
8 D0p LVDS D0p data line
9 D1n LVDS D1n data line
10 D1p LVDS D1p data line
11 D2n LVDS D2n data line
12 D2p LVDS D2p data line
13 GND -
14 GND -
15 CLKn LVDS CLKn clock line
16 CLKp LVDS CLKp clock line
17 D3n LVDS D3n data line
18 D3p LVDS D3p data line

HDMI (output) Pinout


Sl-mipi-lvds-hdmi-cnv-HDMI-conn.png


HDMI connector built-in SL-MIPI-LVDS-HDMI-CNV converter has standard HDMI pinout.

Dimensions


Sl-mipi-lvds-hdmi-cnv-dimension.png
Retrieved from "https://wiki.somlabs.com/index.php?title=SL-MIPI-LVDS-HDMI-CNV-11_Datasheet_and_Pinout&oldid=3495"
NXP Partner ST Partner Renesas Partner