Personal tools

SL-MIPI-LVDS-HDMI-CNV-11 Datasheet and Pinout

From SomLabs Wiki

Revision as of 14:20, 30 September 2020 by Piotrzbysinski (talk | contribs) (LVDS (output) Pinout)
Jump to: navigation, search

SL-MIPI-LVDS-HDMI-CNV MIPI-DSI to LVDS and HDMI converter Datasheet and Pinout


General description

Sl-mipi-lvds-hdmi-cnv-v11.jpg


SL-MIPI-LVDS-HDMI-CNV (MIPI-DSI to LVDS HDMI converter) is flexible MIPI-DSI to LVDS and/or HDMI converter. The solution we dedicate to SoMLabs carrier boards equipped with MIPI-DSI interface (with FPC30 connector). Converter is fully compliant with DSI1.02 and HDMI1.4 and converts video stream up to 1080p @60Hz/8b. SL-MIPI-LVDS-HDMI-CNV is fully compatible with SoMLabs carrier borads equipeed with MIPI-CSI FPC30 connector.

Features

  • MIPI-DSI to LVDS and/or HDMI display converter
  • Integrated D-PHY1.1 (DSI1.02)
  • From 1 up to 4 MIPI input data lanes
  • Compatible with MIPI-DSI data packets: 18bpp, RGB666 and 24bpp RGB888
  • Input bandwidth up tp 6Gb/s (4 lanes)
  • LVDS output clocking up to 154 MHz
  • Fully compatible with SoMLabs carrier board:
    • VisionCB-8M-STD (dedicated to i.MX8M mini multicore MPU)
    • VisionCB-STM32MP1-STD (dedicated to STM32MP1 multicore MPU)
  • Plug & Play solution for SoMLabs customers
  • Integrated stereo audio channel
  • Connection with carrier board using FPC30 cable A-A type

Pictures

Sl-mipi-lvds-hdmi-cnv-v11-angle-OK.jpg

Sl-mipi-lvds-hdmi-cnv-v11.jpg

Ordering info

SL-MIPI-LVDS-HDMI-CNV - FPC 30-pin flat cable (A-A) is included.

Operating ranges

Parameter Value Unit Comment
Power Supply
5.0
V
Powered from carrier board
Current
0.1
A
Maximum peak value
Environment temperature
-40…+85
oC -

Electrical parameters

Signal name Parameter Value Units
Min. Typ. Max.
+5V Supply Voltage 4.0 5.0 5.5 V
- Total Supply Current 230 330 400 mA
VIO Video IO Input Voltage 0 3.3 3.6 V
VTPIO TP Controller IO Voltage 0 3.3 3.6 V
VPWREN Power Enable Input Voltage 0 - 5.5 V
fTPI2C TP Controller I2C Speed - - 400 kHz
fPWM PWM Dimming Frequency - - 1 kHz
RINT Interrupt Output Pull-up Resistance - 10 -
RPWREN Power Enable Pull-up Resistance - 10 -
RTPI2C Touch Panel Controller I2C IOs Pull-up Resistance - 2.2 -

MIPI-DSI (input) Pinout

Sl-mipi-lvds-hdmi-cnv-MIPI-conn.png



FPC30 connector pin Function name Description
1 GND -
2 - -
3 HPD HPD line from HDMI (voltage translated to 3.3V)
4 +5V Power supply (input)
5 +5V Power supply (input)
6 +3.3V Power supply (input)
7 +3.3V Power supply (input)
8 GND -
9 SPDIF-TX SPDIF input from SBC
10 INT Interrupt output (voltage translated to 3.3V)
11 RESET Reset input (voltage translated to 3.3V)
12 GND -
13 SDA I2C SDA line (voltage translated to 3.3V)
14 SCL I2C SCL line (voltage translated to 3.3V)
15 GND -
16 D3n MIPI-DSI lane 3 negative line
17 D3p MIPI-DSI lane 3 positive line
18 GND -
19 D2n MIPI-DSI lane 2 negative line
20 D2p MIPI-DSI lane 2 positive line
21 GND -
22 D1n MIPI-DSI lane 1 negative line
23 D1p MIPI-DSI lane 1 positive line
24 GND -
25 D0n MIPI-DSI lane 0 negative line
26 D0p MIPI-DSI lane 0 positive line
27 GND -
28 CLKn MIPI-DSI clock negative line
29 CLKp MIPI-DSI clock positive line
30 GND -

LVDS (output) Pinout

Sl-mipi-lvds-hdmi-cnv-LVDS-conn.png



LVDS connector pin Function name Description
1 +5V Power supply for external devices (max. 20 mA)
Internally connected with pin 2
2 +5V Power supply for external devices (max. 20 mA)
Internally connected with pin 1
3 - -
4 GND -
5 GND -
6 GND -
7 D0n LVDS D0n data line
8 D0p LVDS D0p data line
9 D1n LVDS D1n data line
10 D1p LVDS D1p data line
11 D2n LVDS D2n data line
12 D2p LVDS D2p data line
13 GND -
14 GND -
15 CLKn LVDS CLKn clock line
16 CLKp LVDS CLKp clock line
17 D3p LVDS D3p data line
18 D3n LVDS D3n data line

Dimensions

Sl-mipi-lvds-hdmi-cnv-dimension.png
NXP Partner ST Partner