Personal tools

SL-TFT7-TP-800-480 Datasheet and Pinout

From SomLabs Wiki

Revision as of 11:05, 27 April 2018 by Piotrzbysinski (talk | contribs) (SOM pinout)
Jump to: navigation, search

VisionSOM-6ULL Datasheet and Pinout


General description

SL-TFT7-TP-800-480-front-rocks.png


SL-TFT7-TP-800-480 is complete display TFT-LCD (800x480 px) module integrated with capactive touch-panel. Module is powered from +5V @400mA, data interface is 24 b parallel RGB + I2C (touch-panel controller). SL-TFT7-TP-800-480 module is equpiied with FPC50 connector, 1:1 compatible with SoMLabs carrier, eval and base boards. SOMLabs also provides a complete hardware and software development board for the SoM in the form of a carrier board and optional TFT display and touch panel.

Features

  • Powered by Powertip PH800480T013-IBC06 LCD-TFT
  • Display size 7 inches
  • Display LCD matrix 800x480 px
  • Capacitive touch-panel + TP controller
  • 24-b RGB parallel interface
  • Single supply +5V (DC/DC converters built-in)
  • Backlight LEDs built-in
  • Fully compatible with SoMLabs carrier, eval and base boards

Pictures of SL-TFT7-TP-800-480 module

SL-TFT7-TP-800-480-back-shop.jpg
SL-TFT7-TP-800-480-front-empty-shop.jpg
SL-TFT7-TP-800-480-front-rocks-shop.jpg
SL-TFT7-TP-800-480-front-disindis-shop.jpg
SL-TFT7-TP-800-480-stand2.jpg

Ordering info

SL-TFT7-TP-800-480

Block Diagram

SL-TFT7-TP-800-480-blokowy.png

Operating ranges

Parameter Value Unit Comment
Power Supply
5.0
V
-
Current
0.4
A
Maximum value, depends on displayed picture and backlight light intensity
Video input voltage
max. 3.3
V
Touch panel controller IO voltage
max. 3.3
V
I2C interface, 2.2kΩ pull-up resistor on SDA and SCL lines
Environment temperature
-20…+75
oC -

Electrical parameters

Signal name Parameter Value Units
Min. Typ. Max.
+5V Supply Voltage 4.0 5.0 5.5 V
- Total Supply Current 230 330 400 mA
VIO Video IO Input Voltage 0 3.3 3.6 V
VTPIO TP Controller IO Voltage 0 3.3 3.6 V
VPWREN Power Enable Input Voltage 0 - 5.5 V
fTPI2C TP Controller I2C Speed - - 400 kHz
fPWM PWM Dimming Frequency - - 1 kHz
RINT Interrupt Output Pull-up Resistance - 10 -
RPWREN Power Enable Pull-up Resistance - 10 -
RTPI2C Touch Panel Controller I2C IOs Pull-up Resistance - 2.2 -

SOM pinout

Sl-tft7-tp-800-480-pin1.jpg

FPC50 connector pin Function name Description
1 B0 Blue 0 input
2 B1 Blue 1 input
3 B2 Blue 2 input
4 B3 Blue 3 input
5 B4 Blue 4 input
6 B5 Blue 5 input
7 B6 Blue 6 input
8 B7 Blue 7 input
9 GND Power supply
10 G0 Green 0 input
11 G1 Green 1 input
12 G2 Green 2 input
13 G3 Green 3 input
14 G4 Green 4 input
15 G5 Green 5 input
16 G6 Green 6 input
17 G7 Green 7 input
18 GND Power supply
19 R0 Red 0 input
20 R1 Red 1 input
21 R2 Red 2 input
22 R3 Red 3 input
23 R4 Red 4 input
24 R5 Red 5 input
25 R6 Red 6 input
26 R7 Red 7 input
27 GND Power supply
28 DE DE display controller input
29 HSYNC HSYNC display controller input
30 VSYNC VSYNC display controller input
31 GND Power supply
32 DCLK Main clock input (display controller)
33 GND Power supply
34 - -
35 - -
36 nINT Touch-panel controller interrupt output (OC with 10kΩ pull-up)
37 GPIO1 PWM signal input for backlight control
38 - -
39 - -
40 - -
41 - -
42 SCL Touch-panel controller SCL input (with 2.2kΩ pull-up)
43 SDA Touch-panel controller SDA IO (with 2.2kΩ pull-up)
44 GND Power supply
45 NC No external connections!
46 NC No external connections!
47 +5V Power supply
48 +5V Power supply
49 PWREN Backlight LEDs on/off, with 10kΩ pull-up resisitor (level +5V).
If PWREN pin is open or connected to "1" - LEDs are on.
50 GND Power supply

Dimensions

VisionSOM-6ULL Dimiensions.png
NXP Partner ST Partner Renesas Partner