Personal tools

Difference between revisions of "StarCB-6ULL-STD Datasheet and Pinout"

From SomLabs Wiki

Jump to: navigation, search
(→‎Arduino Uno compatible I/O header)
(→‎MicroSD card interface (J308))
Line 359: Line 359:
 
<br>1. Linux console port (UART4 in MPU) uses vCOM interface.
 
<br>1. Linux console port (UART4 in MPU) uses vCOM interface.
 
<br>2. Two LEDs near MicroUSB connectors allow to monitor connection to USB interface and data transmission.
 
<br>2. Two LEDs near MicroUSB connectors allow to monitor connection to USB interface and data transmission.
−
 
−
== MicroSD card interface (J308) ==
 
−
[[File:visionCB-8Mmini-sdcard.png|center|700px]]
 
−
 
−
 
−
<center>
 
−
{| class="wikitable"
 
−
! style="text-align: center; font-weight: bold;" | Connector pin
 
−
! style="text-align: center; font-weight: bold;" | SD card signal
 
−
! style="text-align: center; font-weight: bold;" | SOM pin
 
−
|-
 
−
| 1 || DATA2 || SD1-DATA2
 
−
|-
 
−
| 2 || DATA3 || SD1-DATA3
 
−
|-
 
−
| 3 || CMD || SD1-CMD
 
−
|-
 
−
| 4 || NVCC-SDIO || Voltage selected 1.8/3.3V by SD1 driver
 
−
|-
 
−
| 5 || CLK || SD1-CLK
 
−
|-
 
−
| 6 || GND || -
 
−
|-
 
−
| 7 || DATA0 || SD1-DATA0
 
−
|-
 
−
| 8 || DATA1 || SD1-DATA1
 
−
|-
 
−
| 9 || CARD-DETECT || SD1-CD
 
−
|}
 
−
</center>
 
  
 
== User Interface (switches and LEDs) ==
 
== User Interface (switches and LEDs) ==

Revision as of 15:50, 22 December 2022

StarCB-6ULL-STD Datasheet and Pinout

General description

StarCB-6ULL-STD.png

StarCB-6ULL-STD is a carrier board for the StarSOM-6ULL family of computer-on-modules, which are powered by NXP i.MX 6ULL application processors (ARM Cortex-A7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.
The carrier board connects with the SoM via a board-to-board, low profile connectors.

Applications

  • IoT Sensor Hubs
  • Home Appliances
  • IoT gateways
  • Protocol converters
  • Home Automation – Smart Home
  • Point-of-sales (POS) terminals
  • Cash Register
  • 2D barcode scanners and printers
  • Smart grid infrastructure
  • Residential gateways
  • Outdoor equipment

Features

  • Carrier Board (Base Board) compatible with the StarSOM-6ULL family of modules based iMX6ULL application processors
  • SoM Interface: 2x100 board-to-board connectors
  • Debug Interface: Linux console (vCOM/USB)
  • Expansion Connectors:
    • QSPI connector 2x10 Pin Header (Male)
    • GPIO connector 2x20 Pin Header (Male)
  • Communication Connectors:
    • 1x Ethernet 10/100Mbit/s, RJ45
    • 1x USB Host Type A connectors
    • 1x USB OTG Micro AB connector
    • 1x Console MicroUSB B connector
  • Display Interface:
    • 50-pin FFC/FPC parallel RGB (up to 24 bits)
  • User Interface:
    • 4+1 Pushbuttons
    • 4+3 LEDs
  • External Power Supply 9-12V DC
  • Temperature Range: 0 to +70°C
  • Board Size: 130mm x 90mm x 20mm

Pictures of StarCB-6LLL-STD board

Version Photo
StarCB-6LL-STD board only
StarCB-6ULL-STD.png
StarCB-6LL-STD board - bottom side
StarCB-6ULL-STD-bottom.png
StarCB-6LL-STD board with StarSOM-6ULL installed
StarCB-6ULL-STD-plus-SOM.png

Ordering info

StarCB-6ULL-STD

Block Diagram

StarCB-6ull-blokowy.jpg

Electrical parameters

Parameter Value Units Comment
Min. Typ. Max.
Power Supply 9.0 12.0 15.0 V Positive pole on central connector of J400
Supply current - - 0.09 A Excluding SOM, LCD, USB and antoher external loads
GPIO voltage 3.3/5 V

QSPI interface (J502, 2x5 gold-pin, 2.54mm)

StarCB-6ULL-STD-QSPI.jpg


Pin Signal Description
1 QSPI1.D0 optionally GPIO4.12
2 VDD-EMMC Internal (on SOM) 1.8V LDO output as reference or power supply voltage for QSPI (SDIO) interface
3 QSPI1.D1 optionally GPIO4.13
4 QSPI1.CS0 optionally GPIO4.16
5 QSPI1.D2 optionally GPIO4.14
6 QSPI1.CLK optionally GPIO4.11
7 QSPI1.D3 optionally GPIO4.15
8 - -
9 QSPI1.DQS optionally GPIO4.10
10 GND -

GPIO connector (J500, 2x20 gold-pin, 2.54mm)

StarCB-6ULL-STD-GPIO.jpg
Pin Signal Description
1 VDD-3V3 Power supply for external loads (up to 300 mA)
2 VDD-5V0 Power supply for external loads (up to 200 mA)
3 I2C2-SDA 4.7k pull-up resistor connected
Connected to LCD J300 connector (touch panel controller)
Optionally GPIO1.31
4 VDD-5V0 Power supply for external loads (up to 200 mA)
5 I2C2-SCL 4.7k pull-up resistor connected
Connected to LCD J300 connector (touch panel controller)
Optionally GPIO1.30
6 GND -
7 TAMPER.0 optionally GPIO5.00
8 UART3.TXD optionally GPIO1.24
9 GND -
10 UART3.RXD optionally GPIO1.25
11 TAMPER.1 optionally GPIO5.01
12 UART3.RTS optionally GPIO1.27
13 TAMPER.2 optionally GPIO5.02
14 GND -
15 TAMPER.3 optionally GPIO5.03
16 UART3.CTS optionally GPIO1.26
17 VDD-3V3 Power supply for external loads (up to 300 mA)
18 JTAG.TDI optionally GPIO1.13
19 UART1.CTS optionally GPIO1.18
20 GND -
21 UART1.RTS optionally GPIO1.19
22 JTAG.TMS optionally GPIO1.11
23 UART1.RXD optionally GPIO1.17
24 UART1.TXD optionally GPIO1.16
25 GND -
26 TAMPER.9 optionally GPIO5.09
27 - -
28 - -
29 TAMPER.4 optionally GPIO5.04
30 GND -
31 UART2.RXD optionally GPIO1.21
32 TAMPER.8 optionally GPIO5.08
33 UART2.TXD optionally GPIO1.20
34 GND -
35 UART2.RTS optionally GPIO1.23
36 TAMPER.7 optionally GPIO5.07
37 UART2.CTS optionally GPIO1.22
38 TAMPER.6 optionally GPIO5.06
39 GND -
40 TAMPER.5 optionally GPIO5.05

Display interface (J300, FPC/FFC 0.5mm)

StarCB-6ULL-STD-LCD.jpg
Pin Signal Description
1 LCD.DATA00 B0
2 LCD.DATA01 B1
3 LCD.DATA02 B2
4 LCD.DATA03 B3
5 LCD.DATA04 B4
6 LCD.DATA05 B5
7 LCD.DATA06 B6
8 LCD.DATA07 B7
9 GND -
10 LCD.DATA08 G0
11 LCD.DATA09 G1
12 LCD.DATA10 G2
13 LCD.DATA11 G3
14 LCD.DATA12 G4
15 LCD.DATA13 G5
16 LCD.DATA14 G6
17 LCD.DATA15 G7
18 GND -
19 LCD.DATA16 R0
20 LCD.DATA17 R1
21 LCD.DATA18 R2
22 LCD.DATA19 R3
23 LCD.DATA20 R4
24 LCD.DATA21 R5
25 LCD.DATA22 R6
26 LCD.DATA23 R7
27 GND -
28 LCD.ENABLE -
29 LCD.HSYNC -
30 LCD.VSYNC -
31 GND -
32 LCD.CLK -
33 GND -
34 GPIO1.04 TS-YPUL
35 GPIO1.03 TS-YNUR
36 GPIO1.02 TS-YPLL
37 GPIO1.01 TS-YNLR
38 - -
39 - -
40 - -
41 - -
42 I2C2-SCL 4.7k pull-up resistor connected
Touch panel controller interface
43 I2C2-SDA 4.7k pull-up resistor connected
Touch panel controller interface
44 GND -
45 VDD-3V3 +3.3V power source fr LCD module
46 VDD-3V3 +3.3V power source fr LCD module
47 VDD-3V3 +3.3V power source fr LCD module
48 VDD-3V3 +3.3V power source fr LCD module
49 LCD.RESET Optional reset signal
GPIO3.04
50 PWREN Optional power-enable signal
GPIO1.15

USB Console Port

StarCB-6ULL-STD-console.jpg
MPU Port GPIO Description
CONSOLE-TXD UART4-TXD -
CONSOLE-RXD UART4-RXD -

Note:
1. Linux console port (UART4 in MPU) uses vCOM interface.
2. Two LEDs near MicroUSB connectors allow to monitor connection to USB interface and data transmission.

User Interface (switches and LEDs)

VisionCB-8Mmini-userinterface.png


User switches

Switch GPIO Description
S305 (black, most on the left) GPIO4-IO03 47k pull-up
S304 GPIO4-IO02 47k pull-up
S303 GPIO4-IO01 47k pull-up
S302 (black, most on the right) GPIO4-IO00 47k pull-up


System switches

Switch Signal name Description
S301 (left, red) Reset -
S300 (right, red) BOOT-RECOVERY -


User LEDs

LED GPIO Description
D303 (most on the left) GPIO4-IO04 User LED1, buffered with inverter
D302 GPIO4-IO05 User LED2, buffered with inverter
D301 GPIO4-IO06 User LED3, buffered with inverter
D300 (most on the right) GPIO4-IO07 User LED4, buffered with inverter


System LEDs

LED GPIO Description
D304 SYS-LED System function monitoring
D305 - Power LED (3.3V)


Dimensions

VisionCB-8Mmini-v11-dimension.png
Retrieved from "https://wiki.somlabs.com/index.php?title=StarCB-6ULL-STD_Datasheet_and_Pinout&oldid=3121"
NXP Partner ST Partner Renesas Partner