Difference between revisions of "StarSBC-6ULL-STD"
From SomLabs Wiki
(Created page with "{{Product|category1=SOM|category2=|image=StarCB-6ULL-STD.png |cb_som_compatibility=StarSOM-6ULL module with NXP iMX6ULL processor (Cortex-A7) |cb_som_socket=Square b2b |cb_dis...") |
|||
| (6 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
{{Product|category1=SOM|category2=|image=StarCB-6ULL-STD.png | {{Product|category1=SOM|category2=|image=StarCB-6ULL-STD.png | ||
|cb_som_compatibility=StarSOM-6ULL module with NXP iMX6ULL processor (Cortex-A7) | |cb_som_compatibility=StarSOM-6ULL module with NXP iMX6ULL processor (Cortex-A7) | ||
| − | |cb_som_socket=Square b2b | + | |cb_som_socket=Square b2b (StarSOM-6ULL format) |
| − | |cb_display_connector= | + | |cb_display_connector=Parallel RGB 24 bit (FPC50) |
| − | |cb_network=1x Ethernet 10/ | + | |cb_network=1x Ethernet 10/100Mbit/s, RJ45 |
|cb_usb=USB 2.0 host x1<br>USB-OTG 2.0 x1 | |cb_usb=USB 2.0 host x1<br>USB-OTG 2.0 x1 | ||
| − | |||
|cb_console_interface=USB/UART | |cb_console_interface=USB/UART | ||
| − | |cb_switches=4/ | + | |cb_switches=4/1 (user/system) |
| − | |cb_leds=4/2/ | + | |cb_leds=4/2/1 (user/system/diagnostic) |
| − | |cb_connectors= | + | |cb_connectors=QSPI (dual row 2x5 gold-pin)<br>GPIOs (dual row 2x20 gold-pin) |
|cb_power_supply=External 9-12V DC | |cb_power_supply=External 9-12V DC | ||
|temp= 0 to +70°C | |temp= 0 to +70°C | ||
| − | |dim= | + | |dim=130mm x 90mm x 20mm |
| − | |description= | + | |description=StarCB-6ULL-STD is a carrier board for the StarSOM-6ULL family of computer-on-modules which are powered by NXP iMX6ULL MPU. The carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, LCD, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product. |
| − | The carrier board connects with the SoM via | + | The carrier board connects with the SoM via two board-to-boarf high speed connectors.<br>StarCB-6ULL-STD carrier board is equipped with parallel RGB 24b video output and 10/100 Ethernet interface.<br>StarCB-6ULL-STD carrier board is equipped with Linux serial console port on USB vCOM. |
<br> | <br> | ||
| Line 21: | Line 20: | ||
| | | | ||
content=  | content=  | ||
| − | *[[ | + | *[[StarCB-6ULL-STD Datasheet and Pinout|StarCB-6ULL-STD Datasheet and Pinout]] |
| − | __WP_Files( | + | __WP_Files(4532) |
}}{{DocBox|boxwidth=21|system=Howto | }}{{DocBox|boxwidth=21|system=Howto | ||
| | | | ||
content=  | content=  | ||
| − | *[[ | + | *[[TBD|TBD]] |
}} | }} | ||
}} | }} | ||
Latest revision as of 16:15, 22 December 2022
| StarSBC-6ULL-STD |
|
StarCB-6ULL-STD is a carrier board for the StarSOM-6ULL family of computer-on-modules which are powered by NXP iMX6ULL MPU. The carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, LCD, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.
The carrier board connects with the SoM via two board-to-boarf high speed connectors. |
Documentation
How to
| Specifications |
| SOM compatibility | StarSOM-6ULL module with NXP iMX6ULL processor (Cortex-A7) |
| SOM socket | Square b2b (StarSOM-6ULL format) |
| Display connector | Parallel RGB 24 bit (FPC50) |
| Network | 1x Ethernet 10/100Mbit/s, RJ45 |
| USB | USB 2.0 host x1 USB-OTG 2.0 x1 |
| Console interface | USB/UART |
| Switches | 4/1 (user/system) |
| LEDs | 4/2/1 (user/system/diagnostic) |
| Connectors | QSPI (dual row 2x5 gold-pin) GPIOs (dual row 2x20 gold-pin) |
| Power supply | External 9-12V DC |
| Temperature Range | 0 to +70°C |
| Dimensions | 130mm x 90mm x 20mm |
