Personal tools

Difference between revisions of "StarSBC-6ULL Datasheet and Pinout"

From SomLabs Wiki

Jump to: navigation, search
(→‎Dimensions)
(→‎GPIO connections)
 
(30 intermediate revisions by the same user not shown)
Line 51: Line 51:
 
[
 
[
 
     {
 
     {
−
       "name" : "Product type",
+
       "name":"Product type",
−
       "type" : "selector",
+
       "type":"selector",
−
       "symbol" : "SLS",
+
       "symbol":"SLC",
−
       "values" : [
+
       "values":[
−
                    {"value" : "SLS",
+
        {
−
                    "description" : "System on Module"}
+
            "value":"SLC",
−
                ]
+
            "description":"Single Board Computer"
−
    },
+
        }
−
    {
+
      ]
−
       "name" : "SOM Name",
+
  },
−
       "type" : "selector",
+
  {
−
       "symbol" : "0",
+
       "name":"Form factor",
−
       "values" : [
+
       "type":"selector",
−
                    {"value" : "0",
+
       "symbol":"2",
−
                    "description" : "StarSOM board-to-board connectors"}
+
       "values":[
−
                ]
+
        {
−
    },
+
            "value":"2",
−
    {
+
            "description":"StarSOM"
−
       "name" : "CPU Family",
+
        }
−
       "type" : "selector",
+
      ]
−
       "symbol" : "6",
+
  },
−
       "values" : [
+
  {
−
                    {"value" : "6",
+
       "name":"CPU Family",
−
                    "description" : "i.MX6"}
+
       "type":"selector",
−
                ]
+
       "symbol":"X6",
−
    },
+
       "values":[
−
    {
+
        {
−
       "name" : "CPU Type",
+
            "value":"X6",
−
       "type" : "selector",
+
            "description":"i.MX6"
−
       "symbol" : "Y2",
+
        }
−
       "values" : [
+
      ]
−
                    {"value" : "Y2", "description" : "i.MX6 ULL Y2"}
+
  },
−
                ]
+
  {
−
    },
+
       "name":"CPU Type",
−
    {
+
       "type":"selector",
−
        "type" : "separator",
+
       "symbol":"CpuType",
−
        "value" : "_"
+
       "values":[
−
    },
+
        {
−
{
+
            "value":"Y2",
−
       "name" : "CPU Clock Speed",
+
            "description":"i.MX6 ULL Y2"
−
       "type" : "selector",
+
        }
−
       "symbol" : "Clock",
+
      ]
−
       "values" : [
+
  },
−
                    {"value" : "528C", "description" : "528MHz"},
+
  {
−
                    {"value" : "792C", "description" : "792MHz"},
+
      "type":"separator",
−
                    {"value" : "900C", "description" : "900MHz"}
+
      "value":"_"
−
                ]
+
  },
−
    },
+
  {
−
    {
+
       "name":"CPU Clock Speed",
−
        "type" : "separator",
+
       "type":"selector",
−
        "value" : "_"
+
       "symbol":"Clock",
−
    },
+
       "values":[
−
    {
+
        {
−
       "name" : "DDR3 RAM Size",
+
            "value":"528C",
−
       "type" : "selector",
+
            "description":"528MHz"
−
       "symbol" : "RamSize",
+
        },
−
       "values" : [
+
        {
−
                    {"value" : "128R", "description" : "128MB"},
+
            "value":"792C",
−
                    {"value" : "256R", "description" : "256MB"},
+
            "description":"792MHz"
−
                    {"value" : "512R", "description" : "512MB"}
+
        },
−
                ]
+
        {
−
    },
+
            "value":"900C",
−
    {
+
            "description":"900MHz"
−
        "type" : "separator",
+
        }
−
        "value" : "_"
+
      ]
−
    },
+
  },
−
    {
+
  {
−
       "name" : "Flash Size Type and Density",
+
      "type":"separator",
−
       "type" : "selector",
+
      "value":"_"
−
       "symbol" : "FlashSize",
+
  },
−
       "values" : [
+
  {
−
                    {"value" : "04GE", "description" : "4GB eMMC"},
+
       "name":"DDR3 RAM Size",
−
                    {"value" : "08GE", "description" : "8GB eMMC"},
+
       "type":"selector",
−
                    {"value" : "16GE", "description" : "16GB eMMC"},
+
       "symbol":"RamSize",
−
                    {"value" : "32GE", "description" : "32GB eMMC"}
+
       "values":[
−
                ]
+
        {
−
    },
+
            "value":"64R",
−
    {
+
            "description":"64MB"
−
        "type" : "separator",
+
        },
−
        "value" : "_"
+
        {
−
    },
+
            "value":"128R",
−
    {
+
            "description":"128MB"
−
       "name" : "Special Features",
+
        },
−
       "type" : "selector",
+
        {
−
       "symbol" : "SF",
+
            "value":"256R",
−
       "values" : [
+
            "description":"256MB"
−
                    {"value" : "0SF", "description" : "No Special Features"},
+
        },
−
                    {"value" : "1WB", "description" : "Built-in Murata 802.11b/g/n Wi-Fi and Bluetooth v5.1 Module"},
+
        {
−
                    {"value" : "2ET", "description" : "Built-in Microchip 100Mb Ethernet PHY"},
+
            "value":"512R",
−
                    {"value" : "3WE", "description" : "Built-in Murata 802.11b/g/n Wi-Fi/Bluetooth v5.1 and Microchip 100Mb Ethernet PHY"}
+
            "description":"512MB"
−
                ]
+
        }
−
    },
+
      ]
−
    {
+
  },
−
        "type" : "separator",
+
  {
−
        "value" : "_"
+
      "type":"separator",
−
    },
+
      "value":"_"
−
    {
+
  },
−
       "name" : "Operating Temperature",
+
  {
−
       "type" : "selector",
+
       "name":"Flash Size Type and Density",
−
       "symbol" : "TEMP",
+
       "type":"selector",
−
       "values" : [
+
       "symbol":"FlashSize",
−
                    {"value" : "C", "description" : "Consumer: 0 to +70 C "},
+
       "values":[
−
                    {"value" : "E", "description" : "Extended with Wi-Fi: -25 to +70 C"},
+
        {
−
                    {"value" : "I", "description" : "Industrial: -40 to +85 C"}
+
            "value":"04GE",
−
                ]
+
            "description":"4GB eMMC"
−
    }
+
        },
−
 
+
        {
−
 
+
            "value":"08GE",
−
  ]
+
            "description":"8GB eMMC"
−
__orderingInfoEnd__
+
        },
 +
        {
 +
            "value":"16GE",
 +
            "description":"16GB eMMC"
 +
        },
 +
        {
 +
            "value":"32GE",
 +
            "description":"32GB eMMC"
 +
        }
 +
      ]
 +
  },
 +
  {
 +
      "type":"separator",
 +
      "value":"_"
 +
  },
 +
  {
 +
       "name":"Special Features",
 +
       "type":"selector",
 +
       "symbol":"SF",
 +
       "values":[
 +
        {
 +
            "value":"0SF",
 +
            "description":"No Special Features"
 +
        },
 +
        {
 +
            "value":"1WB",
 +
            "description":"Built-in Murata 802.11b/g/n Wi-Fi/Bluetooth v5.1"
 +
        },
 +
        {
 +
            "value":"2ET",
 +
            "description":"Built-in Microchip 100Mb Ethernet PHY"
 +
        },
 +
        {
 +
            "value":"3WE",
 +
            "description":"Built-in Murata 802.11b/g/n Wi-Fi/Bluetooth v5.1 and Microchip 100Mb Ethernet PHY"
 +
        }
 +
      ]
 +
  },
 +
  {
 +
      "type":"separator",
 +
      "value":"_"
 +
  },
 +
  {
 +
       "name":"Operating Temperature",
 +
       "type":"selector",
 +
       "symbol":"TEMP",
 +
       "values":[
 +
        {
 +
            "value":"C",
 +
            "description":"Consumer: 0 to +70 C "
 +
        },
 +
        {
 +
            "value":"E",
 +
            "description":"Extended: -25 to +70 C"
 +
        },
 +
        {
 +
            "value":"I",
 +
            "description":"Industrial: -40 to +85 C"
 +
        }
 +
      ]
 +
  }
 +
]__orderingInfoEnd__
  
 
== Block Diagram ==
 
== Block Diagram ==
Line 175: Line 236:
 
| <center>5</center>
 
| <center>5</center>
 
| <center>V</center>
 
| <center>V</center>
−
| Connected to J100 or J101 or USB conenctors
+
| Connected to J100 or J101 or USB conenctors<sup>1</sup>
 
|-
 
|-
−
| Input GPIO voltage
+
| GPIO voltage
 
| <center>3.3</center>
 
| <center>3.3</center>
 
| <center>V</center>
 
| <center>V</center>
 
| -
 
| -
 
|-
 
|-
−
| rowspan="3" | Environment temperature<sup>1</sup>
+
| rowspan="3" | Environment temperature<sup>2</sup>
 
| <center>-40…+85</center>
 
| <center>-40…+85</center>
 
| rowspan="3" | <sup>o</sup>C
 
| rowspan="3" | <sup>o</sup>C
Line 194: Line 255:
 
|}
 
|}
 
Note: <br />
 
Note: <br />
−
1. Maximum MPU junction temperature is +105<sup>o</sup>C (industrial version) or +95<sup>o</sup>C (consumer version).<br />
+
1. Power supply can be delivered by two ways: J100/J101 or MicroUSB (OTG).<br />
 +
2. Maximum MPU junction temperature is +105<sup>o</sup>C (industrial version) or +95<sup>o</sup>C (consumer version).<br />
  
 
== Electrical parameters ==
 
== Electrical parameters ==
 
{| class="wikitable"
 
{| class="wikitable"
−
! rowspan="2" | SOM<br />signal name
+
! rowspan="2" | SBC<br />signal name
 
! rowspan="2" | Parameter
 
! rowspan="2" | Parameter
 
! colspan="3" | Value
 
! colspan="3" | Value
Line 207: Line 269:
 
| Max.
 
| Max.
 
|-
 
|-
−
| +3V3IN
+
| +5V
−
| Supply Voltage
+
| SBC supply voltage<sup>1</sup>
−
| 3.15
+
| 4.85
 +
| 5
 +
| 5.15
 +
| V
 +
|-
 +
| +3.3VO
 +
| Supply voltage for external peripherals
 +
| 3.2
 
| 3.3
 
| 3.3
−
| 3.45
+
| 3.35
 
| V
 
| V
−
|-
 
−
| +3V3IN
 
−
| Total Supply Current<sup>1</sup>
 
−
| -
 
−
| 175
 
−
| 255
 
−
| mA
 
 
|-
 
|-
 
| VGPIO
 
| VGPIO
Line 228: Line 290:
 
| V
 
| V
 
|-
 
|-
−
| +3V3SW
+
| I<sub>+5V</sub>
 +
| Total Supply Current
 +
| TBD
 +
| TBD
 +
| TBD
 +
| mA
 +
|-
 +
| I<sub>+3.3VO</sub>
 
| Output current of 3.3V power supply for peripherals<br />
 
| Output current of 3.3V power supply for peripherals<br />
 
| -
 
| -
 
| -
 
| -
−
| 0.2
+
| 0.1
 
| A
 
| A
 
|-
 
|-
−
| USB-OTGx-VBUS
+
| V<sub>BATT</sub>
−
| USB Supply
+
| RTC/SNVS Backup<br />Battery Supply
−
| 4.40
 
−
| -
 
−
| 5.5
 
−
| V
 
−
|-
 
−
| VDD-COIN-3V
 
−
| SNVS Backup<br />Battery Supply
 
 
| 2.66
 
| 2.66
 
| -
 
| -
 
| 3.6
 
| 3.6
−
| V
 
−
|-
 
−
| -
 
−
| ADC Inputs Voltage
 
−
| 0
 
−
| -
 
−
| 3.3
 
 
| V
 
| V
 
|}
 
|}
 
Notes:<br />
 
Notes:<br />
−
1. Excluding external load connected to +3.3VOUT lines.<br />
+
1. The external voltage connected to pin 2 of J100 and/or J101 or MicroUSB.<br />
 
2. Applying the maximum voltage 3.6V results in shorten lifetime. Recommended value is smaller than 3.5V.<br />
 
2. Applying the maximum voltage 3.6V results in shorten lifetime. Recommended value is smaller than 3.5V.<br />
  
−
== Features ==
+
== GPIO connections ==
 
[[File:StarSBC-6ULL-connectors.png|center]]
 
[[File:StarSBC-6ULL-connectors.png|center]]
  
Line 270: Line 325:
 
! style="vertical-align:middle;" | Default function
 
! style="vertical-align:middle;" | Default function
 
! style="vertical-align:middle;" | GPIO
 
! style="vertical-align:middle;" | GPIO
−
! style="vertical-align:middle;" | Ball numer BGA289
+
! style="vertical-align:middle;" | Ball number BGA289
 
! style="vertical-align:middle;" | Notes
 
! style="vertical-align:middle;" | Notes
 
|- style="text-align:center;"
 
|- style="text-align:center;"
Line 787: Line 842:
 
| style="vertical-align:middle;" | Permanently  connected to GND
 
| style="vertical-align:middle;" | Permanently  connected to GND
 
|}
 
|}
 +
 +
Note:
 +
<br>1. WiFi radio module is connected to SDIO1 interface.
 +
<br>2. Power supply (5V) for SBC can be connected to pin 2 of J100 or 101 or MicroUSB connector.
 +
 +
== Software loading - BOOT0 jumper ==
 +
[[File:StarSBC-6ULL-boot-jumper.png|center]]
 +
<center><b>Location of BOOT0 jumper (bottom view)</b></center>
 +
<br>If BOOT0 jumper is open - MPU starts normally (software from MMC memory is loading).
 +
<br>If pins of BOOT0 jumper are connected to each other, bootloader starts (active on USB1).
 +
 +
== RTC battery connection ==
 +
[[File:StarSBC-battery-connector.png|center]]
  
 
== Dimensions ==
 
== Dimensions ==
 
[[File:StarSBC-6ULL-size.png|center]]
 
[[File:StarSBC-6ULL-size.png|center]]

Latest revision as of 15:14, 30 December 2023

StarSBC-6ULL Datasheet and Pinout

General description

StarSBC-6ULL-intro.jpg

The StarSBC-6ULL SBC (Single Board Computer) is small but powerful IoT Sensor Hub, optimized for operation in applications requiring a large number of communication interfaces. The StarSBC-6ULL is equipped with on-board PHY 10/100 Mb/s Ethernet interface, Murata 1DX radio module (integrated WiFi/BLE), USB host and USB-OTG interfaces. The StarSBC-6ULL supports connections to a variety of interfaces: I2C, SPI, UART and CAN. Additionally the StarSBC-6ULL module is equipped with easy to use 2×26 pin connectors with 40 GPIOs for any use in user application.

The StarSBC-6ULL can be optionally equipped with communication expander module SLH2-comm, which is equipped with 2 x CAN, 2 x RS485, 2 x RS232 physical layers interfaces.

The StarSBC-6ULL supports industrial grade embedded applications.

Applications

  • IoT Sensor Hubs
  • Home Appliances
  • IoT gateways
  • Protocol converters
  • Home Automation – Smart Home
  • Point-of-sales (POS) terminals
  • Cash Register
  • 2D barcode scanners and printers
  • Smart grid infrastructure
  • Residential gateways
  • Outdoor equipment

Features

  • Powered by NXP i.MX 6ULL application processor
  • Core clock up to 900MHz
  • Up to 1GB RAM DDR3L
  • Up to 32GB eMMC
  • Optional Murata 802.11b/g/n Wi-Fi and Bluetooth v5.1 module
  • Power-efficient and cost-optimized solution
  • Ideal for industrial IoT and embedded applications
  • Integrated security features

Pictures of SBC versions

Version Photo
eMMC
StarSBC-6ull-emmc-top-bottom.jpg
Wi-Fi and Ethernet PHY10/100 are available as an options.

Ordering info

SLC2X6CpuType_Clock_RamSize_FlashSize_SF_TEMP
SLCProduct type
SLC - Single Board Computer
2Form factor
2 - StarSOM
X6CPU Family
X6 - i.MX6
CpuTypeCPU Type
Y2 - i.MX6 ULL Y2
ClockCPU Clock Speed
528C - 528MHz
792C - 792MHz
900C - 900MHz
RamSizeDDR3 RAM Size
64R - 64MB
128R - 128MB
256R - 256MB
512R - 512MB
FlashSizeFlash Size Type and Density
04GE - 4GB eMMC
08GE - 8GB eMMC
16GE - 16GB eMMC
32GE - 32GB eMMC
SFSpecial Features
0SF - No Special Features
1WB - Built-in Murata 802.11b/g/n Wi-Fi/Bluetooth v5.1
2ET - Built-in Microchip 100Mb Ethernet PHY
3WE - Built-in Murata 802.11b/g/n Wi-Fi/Bluetooth v5.1 and Microchip 100Mb Ethernet PHY
TEMPOperating Temperature
C - Consumer: 0 to +70 C
E - Extended: -25 to +70 C
I - Industrial: -40 to +85 C

Block Diagram

StarBC-6ULL-block diagram.png

Operating ranges

Parameter Value Unit Comment
Power Supply
5
V
 Connected to J100 or J101 or USB conenctors1
GPIO voltage
3.3
V
 -
Environment temperature2
-40…+85
 oC Industrial range w/o WiFi module
-25…+70
 Industrial (extended) range with WiFi module
0…+70
 Consumer range

Note:
1. Power supply can be delivered by two ways: J100/J101 or MicroUSB (OTG).
2. Maximum MPU junction temperature is +105oC (industrial version) or +95oC (consumer version).

Electrical parameters

SBC
signal name 		Parameter Value Units
Min. Typ. Max.
+5V SBC supply voltage1 4.85 5 5.15 V
+3.3VO Supply voltage for external peripherals 3.2 3.3 3.35 V
VGPIO GPIO Input Voltage 0 3.3 3.62 V
I+5V Total Supply Current TBD TBD TBD mA
I+3.3VO Output current of 3.3V power supply for peripherals
 - - 0.1 A
VBATT RTC/SNVS Backup
Battery Supply 		2.66 - 3.6 V

Notes:
1. The external voltage connected to pin 2 of J100 and/or J101 or MicroUSB.
2. Applying the maximum voltage 3.6V results in shorten lifetime. Recommended value is smaller than 3.5V.

GPIO connections

StarSBC-6ULL-connectors.png


Connector pin number Default function GPIO Ball number BGA289 Notes
J100
1 +3,3VO +3,3V power output (max. 100 mA) - paralelly connected to pin 1 of J101
2 +5V External power supply (power source) 5V - paralelly connected to pin 2 of J101
3 UART8-RXD ENET2_TX_EN B15
4 GND
5 UART8-TXD ENET2_TX_DATA1 A16
6 UART3-TXD UART3_TX_DATA H17
7 PWM5 LED_DATA18 A13
8 UART3-RXD UART3_RX_DATA H16
9 GND
10 UART3-CTS UART3_CTS H15
11 UART4-RXD LCD_ENABLE B8
12 UART3-RTS UART3_RTS G14
13 UART4-TXD LCD_CLK A8
14 GND
15 I2C4-SDA LCD_DATA02 E10 In I2C mode external pull-up resistor is necessary (no any internal pull-up)
16 I2C3-SDA LCD_DATA00 B9 In I2C mode external pull-up resistor is necessary (no any internal pull-up)
17 I2C4-SCL LCD_DATA03 D10 In I2C mode external pull-up resistor is necessary (no any internal pull-up)
18 I2C3-SCL LCD_DATA01 A9 In I2C mode external pull-up resistor is necessary (no any internal pull-up)
19 ECSPI2-MOSI UART5_TX_DATA F17
20 UART7-RXD LCD_DATA16 C13
21 ECSPI2-MISO UART5_RX_DATA G13
22 UART7-TXD LCD_DATA17 B13
23 ECSPI2-SCLK UART4_TX_DATA G17
24 UART7-CTS LCD_DATA07 D11
25 ECSPI2-CS UART4_RX_DATA G16
26 UART7-RTS LCD_DATA06 A10
J101
1 +3,3VO +3,3V power output (max. 100 mA) - paralelly connected to pin 1 of J100
2 +5V External power supply (power source) 5V - paralelly connected to pin 2 of J100
3 USB1-DP Line connected to USB1 channel through MUX (output ENET2_RX_ER, ball D16 is USB1 connection selector).
Connected to USB1-DP MPU line if ENET2_RX_ER="0" (USB1-SEL), in another case USB1-DP MPU line is connected to MicroUSB connector (USB-OTG).
4 GND
5 USB1-DM Line connected to USB1 channel through MUX (output ENET2_RX_ER, ball D16 is USB1 connection selector).
Connected to USB1-DM MPU line if ENET2_RX_ER="0" (USB1-SEL), in another case USB1-DM MPU line is connected to MicroUSB connector (USB-OTG).
6 GPIO-6 GPIO1_IO06 K17
7 GPIO3.17 LCD_DATA12 C12
8 GPIO-7 GPIO1_IO07 L16
9 GND
10 GPIO-8 GPIO1_IO08 N17
11 CAN1-TX LCD_DATA08 B11
12 GPIO-9 GPIO1_IO09 M15
13 CAN1-RX LCD_DATA09 A11
14 GND
15 CAN2-TX LCD_DATA10 E12
16 GPIO3.2 LCD_HSYNC D9
17 CAN2-RX LCD_DATA11 D12
18 GPIO3.3 LCD_VSYNC C9
19 MQS-R LCD_DATA22 A14
20 UART2-RXD UART2_RX_DATA J16
21 MQS-L LCD_DATA23 B16
22 UART2-TXD UART2_TX_DATA J17
23 GPIO3.25 LCD_DATA20 C14
24 UART2-CTS UART2_CTS J15
25 GPIO3.26 LCD_DATA21 B14
26 UART2-RTS UART2_RTS H14
J102
1 UART1-TXD UART1_TX_DATA K14 TxD line of Linux console port (LV-TTL logic levels)
2 UART1-RXD UART1_RX_DATA K16 RxD line of Linux console port (LV-TTL logic levels)
3 GND
Another functions
BUZZER GPIO1_IO05 M17 Electromagnetic speaker control output (thru NPN driver)
SYSLED ENET2_TX_CLK D17 System or user LED control output (heartbeat by default, thru NPN driver)
USRLED LCD_DATA14 A12 User LED control output (thru NPN driver)
WDOG-B LCD_RESET E9 Used by system, do not modify default configuration
ENET-MDIO ENET2_RX_DATA0 C17
ENET-MDC ENET2_RX_DATA1 C16
ENET1-RST ENET2_RX_EN B17
ENET1-INT ENET2_TX_DATA0 A15
USB1-SEL ENET2_RX_ER D16
USB1-ID GPIO1_IO00 K13
USB1-VBUS-OC GPIO1_IO01 L15
USB1-VBUS-EN GPIO1_IO04 M16
USB2-VBUS-OC GPIO1_IO03 L17
USB2-VBUS-EN GPIO1_IO02 L14
WiFi and BLE module connection
BT-ENABLE CSI_MCLK F5
WLAN-HWAKE CSI_PIXCLK E5
BT-HWAKE CSI_VSYNC F2
BT-WAKE CSI_HSYNC F3
BT-RXD CSI_DATA00 E4 UART5
BT-TXD CSI_DATA01 E3 UART5
BT-RTS CSI_DATA02 E2 UART5
BT-RTS CSI_DATA03 E1 UART5
BT-PCM-SYNC CSI_DATA04 D4
BT-PCM-CLK CSI_DATA05 D3
BT-PCM-OUT CSI_DATA06 D2
BT-PCM-IN CSI_DATA07 D1
CLK32kHz JTAG_CTK M14 Clock output to 1DX radio module (WiFi/BLE)
JTAG_MOD JTAG_MOD P15 Permanently connected to GND
BOOT_MODE1 BOOT_MODE1 U10 Permanently connected to GND

Note:
1. WiFi radio module is connected to SDIO1 interface.
2. Power supply (5V) for SBC can be connected to pin 2 of J100 or 101 or MicroUSB connector.

Software loading - BOOT0 jumper

StarSBC-6ULL-boot-jumper.png
Location of BOOT0 jumper (bottom view)


If BOOT0 jumper is open - MPU starts normally (software from MMC memory is loading).
If pins of BOOT0 jumper are connected to each other, bootloader starts (active on USB1).

RTC battery connection

StarSBC-battery-connector.png

Dimensions

StarSBC-6ULL-size.png
Retrieved from "https://wiki.somlabs.com/index.php?title=StarSBC-6ULL_Datasheet_and_Pinout&oldid=3576"
NXP Partner ST Partner Renesas Partner