Personal tools

VisionCB-6ULL-STD

From SomLabs Wiki

Jump to: navigation, search
VisionCB-6ULL-STD
VisionCB-6ULL-STD VisionCB-6ULL-STD is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX 6UL or i.MX 6ULL application processors (ARM Cortex-A7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, UART, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.
Specifications
Memoryup to 512MB DDR3L
(depends on used VisionSOM)
Display24-bit RGB parallel interface
Cameraup to 24-bit CSI interface
StorageuSD card
or up to 32GB eMMC
or up to 512MB NAND Flash
(depends on used VisionSOM)
Network1x Ethernet 10/100Mbit/s, RJ45
Wi-Fi 802.11b/g/n
(depends on used VisionSOM)
USB2x USB2.0 OTG Host/Device
Temperature Range0 to +70°C
Dimensions130mm x 90mm x 17mm
NXP Partner ST Partner Renesas Partner