Difference between revisions of "VisionCB-8M-ADV"
From SomLabs Wiki
(Created page with "{{Product|category1=SOM|category2=|image=VisionCB-8Mmini-ADV-11.png |cb_som_compatibility=VisionSOM-8Mmini module with quad core NXP iMX8Mmini processor (4 x Cortex-A53 + Cort...") |
|||
| (6 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | {{Product|category1=SOM|category2=|image=VisionCB-8Mmini-ADV- | + | {{Product|category1=SOM|category2=|image=VisionCB-8Mmini-ADV-v11.png |
|cb_som_compatibility=VisionSOM-8Mmini module with quad core NXP iMX8Mmini processor (4 x Cortex-A53 + Cortex-M4) | |cb_som_compatibility=VisionSOM-8Mmini module with quad core NXP iMX8Mmini processor (4 x Cortex-A53 + Cortex-M4) | ||
|cb_som_socket=SODIMM200 | |cb_som_socket=SODIMM200 | ||
| − | |cb_display_connector=up to 4 lanes MIPI-DSI interface (FPC30) | + | |cb_display_connector=LVDS<br>HDMI<br>up to 4 lanes MIPI-DSI interface (FPC30) |
|cb_network=1x Ethernet 10/100/1000Mbit/s, RJ45 | |cb_network=1x Ethernet 10/100/1000Mbit/s, RJ45 | ||
|cb_usb=USB 2.0 host x1<br>USB-OTG 2.0 x1 | |cb_usb=USB 2.0 host x1<br>USB-OTG 2.0 x1 | ||
| Line 8: | Line 8: | ||
|cb_console_interface=USB/UART | |cb_console_interface=USB/UART | ||
|cb_switches=4/2 (user/system) | |cb_switches=4/2 (user/system) | ||
| − | |cb_leds=4/2 (user/system) | + | |cb_leds=4/2/3 (user/system/diagnostic) |
| − | |cb_connectors=MIPI-CSI2 camera connector (FPC30 | + | |cb_connectors=M.2 Key E<br>MIPI-CSI2 camera connector (FPC30)<br>MicroSD socket<br>Serial comm (16 pins, 2.54mm) |
|cb_power_supply=External 9-12V DC | |cb_power_supply=External 9-12V DC | ||
|temp= 0 to +70°C | |temp= 0 to +70°C | ||
|dim=160mm x 100mm x 18mm | |dim=160mm x 100mm x 18mm | ||
|description=VisionCB-8M-ADV is a carrier board for the VisionSOM-8Mmini family of computer-on-modules which are powered by NXP SOC iMX8Mmini (quad core ARM Cortex-A53+ single Cortex-M4). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, PCIe, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product. | |description=VisionCB-8M-ADV is a carrier board for the VisionSOM-8Mmini family of computer-on-modules which are powered by NXP SOC iMX8Mmini (quad core ARM Cortex-A53+ single Cortex-M4). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, PCIe, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product. | ||
| − | The carrier board connects with the SoM via a standard SODIMM connector. | + | The carrier board connects with the SoM via a standard SODIMM connector.<br>VisionCB-8M-ADV carrier board is equipped with HDMI/LVDS and MIPI-DSI video outputs, 24-bit audio codec, PCIe (M.2 key M) socket (2242, 2260, 2280), on-board RTC with battery socket, RS-485 and CAN FD interfaces.<br>VisionCB-8M-ADV carrier board is equipped with Segger J-Link debugger and Linux serial console port on USB vCOM. |
| − | VisionCB-8M-ADV carrier board is equipped with | ||
<br> | <br> | ||
| Line 23: | Line 22: | ||
content=  | content=  | ||
*[[VisionCB-8M-ADV Datasheet and Pinout|VisionCB-8M-ADV Datasheet and Pinout]] | *[[VisionCB-8M-ADV Datasheet and Pinout|VisionCB-8M-ADV Datasheet and Pinout]] | ||
| − | __WP_Files( | + | __WP_Files(3225) |
}}{{DocBox|boxwidth=21|system=Howto | }}{{DocBox|boxwidth=21|system=Howto | ||
| | | | ||
Revision as of 11:40, 1 February 2021
| VisionCB-8M-ADV |
|
VisionCB-8M-ADV is a carrier board for the VisionSOM-8Mmini family of computer-on-modules which are powered by NXP SOC iMX8Mmini (quad core ARM Cortex-A53+ single Cortex-M4). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, PCIe, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.
The carrier board connects with the SoM via a standard SODIMM connector. |
Documentation
How to
| Specifications |
| SOM compatibility | VisionSOM-8Mmini module with quad core NXP iMX8Mmini processor (4 x Cortex-A53 + Cortex-M4) |
| SOM socket | SODIMM200 |
| Display connector | LVDS HDMI up to 4 lanes MIPI-DSI interface (FPC30) |
| Network | 1x Ethernet 10/100/1000Mbit/s, RJ45 |
| USB | USB 2.0 host x1 USB-OTG 2.0 x1 |
| Debugger | Built-in Segger J-Link (JTAG) |
| Console interface | USB/UART |
| Switches | 4/2 (user/system) |
| LEDs | 4/2/3 (user/system/diagnostic) |
| Connectors | M.2 Key E MIPI-CSI2 camera connector (FPC30) MicroSD socket Serial comm (16 pins, 2.54mm) |
| Power supply | External 9-12V DC |
| Temperature Range | 0 to +70°C |
| Dimensions | 160mm x 100mm x 18mm |
