Personal tools

Difference between revisions of "VisionCB-8M-STD Datasheet and Pinout"

From SomLabs Wiki

Jump to: navigation, search
(PCIe interface (J303, FPC/FFC 0.5mm))
(Features)
(One intermediate revision by the same user not shown)
Line 40: Line 40:
 
**1x Console MicroUSB B connector
 
**1x Console MicroUSB B connector
 
*Display Interface:  
 
*Display Interface:  
**30-pin FFC/FPC MIPI-DSI
+
**30-pin FFC/FPC MIPI-DSI (up to 4 lanes)
 
*Camera Interface:
 
*Camera Interface:
**30-pin FFC/FPC MIPI-CSI2
+
**30-pin FFC/FPC MIPI-CSI2 (up to 4 lanes)
 
*User Interface:
 
*User Interface:
 
**4+2 Pushbuttons
 
**4+2 Pushbuttons
Line 92: Line 92:
 
| Power Supply
 
| Power Supply
 
| 9.0
 
| 9.0
| 11.0
 
 
| 12.0
 
| 12.0
 +
| 15.0
 
| V
 
| V
 
| Positive pole on central connector of J400
 
| Positive pole on central connector of J400

Revision as of 14:14, 26 October 2020

VisionCB-8M-STD v.1.1 Datasheet and Pinout


General description

VisionCB-8Mmini-STD-11.png

VisionCB-8M-STD is a carrier board for the VisionSOM-8Mmini family of computer-on-modules which are powered by NXP SOC iMX8Mmini (quad core ARM Cortex-A53+ single Cortex-M4). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, PCIe, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.
The carrier board connects with the SoM via a standard SODIMM connector.
VisionCB-8M-STD is equipped with Segger J-Link debugger and Linux serial console port on USB vCOM.

Applications

  • Multimedia
  • Video streaming
  • Industrial embedded Linux computer
  • Home Appliances
  • Home Automation – Smart Home
  • Human-machine Interfaces (HMI)
  • Point-of-sales (POS) terminals
  • Cash Register
  • 2D barcode scanners and printers
  • IoT gateways
  • Residential getaways
  • Machine vision equipment
  • Robotics
  • Fitness/outdoor equipment

Features

  • Carrier Board (Base Board) compatible with the VisionSOM-8Mini family of modules based on quad core, heterogenous NXP iMX8Mmini application processors
  • SoM Interface: SODIMM200
  • Debug Interface: built-in Segger J-Link JTAG debugger
  • Expansion Connectors:
    • Serial communication connector 2x10 Pin Header (Male)
    • Raspberry Pi compatible connectors 2x20 Pin Header (Male)
    • Arduino compatible connector
    • MicroSD card socket
  • Communication Connectors:
    • PCIe (single lane, FPC16 connector)
    • 1x Ethernet 10/100/1000Mbit/s, RJ45
    • 1x USB Host Type A connectors
    • 1x USB OTG Micro AB connector
    • 1x Console MicroUSB B connector
  • Display Interface:
    • 30-pin FFC/FPC MIPI-DSI (up to 4 lanes)
  • Camera Interface:
    • 30-pin FFC/FPC MIPI-CSI2 (up to 4 lanes)
  • User Interface:
    • 4+2 Pushbuttons
    • 4+2 LEDs
  • External Power Supply 9-12V DC
  • Temperature Range: 0 to +70°C
  • Board Size: 160mm x 100mm x 18mm

Pictures of VisionCB-8M-STD v1.1 board

Version Photo
VisionCB-8M-STD v1.1 board only
VisionCB-8Mmini-STD-11.png
VisionCB-8M-STD v1.1 with VisionSOM-8Mmini
VisionCB-8Mmini-STD-11-SOM.png

Ordering info

VisionCB-8M-STD v1.1

Block Diagram

Visioncb-8Mmini-STD-v11-blokowy.png

Electrical parameters

Parameter Value Units Comment
Min. Typ. Max.
Power Supply 9.0 12.0 15.0 V Positive pole on central connector of J400
Supply current - - 0.12 A Excluding LCD, USB and antoher external loads
LCD/Camera Power Supply (logic) 3.25 3.3 3.35 V -
LCD/Camera Power Supply (backlight and aux) 4.85 5 5.1 V -
Arudino GPIO voltage 3.3/5 V Selected by V-ARD jumper

PCIe interface (J303, FPC/FFC 0.5mm)

VisionCB-8Mmini-mipi-PCIe.png


Pin Signal Description
1 GND -
2 PCIE-RXN-P 100Ohm resistor in series
3 PCIE-RXN-N 100Ohm resistor in series
4 GND -
5 PCIE-TXN-P Separated with capacitor
6 PCIE-TXN-N Separated with capacitor
7 GND -
8 PCIE-CLK-P Separated with capacitor
9 PCIE-CLK-N Separated with capacitor
10 GND -
11 I2C2-SCL Configuration I2C interface (3.3V)
12 I2C2-SDA Configuration I2C interface (3.3V)
13 +3.3V Power supply for external devices
14 +3.3V Power supply for external devices
15 +5V Power supply for external devices
16 +5V Power supply for external devices

Note:
1. 1st pin of J303 is at the top of the image.

Camera MIPI-CSI interface (J302, FPC/FFC 0.5mm)

VisionCB-8Mmini-mipi-csi.png
Pin Signal Description
1 GND -
2 CSI-CLK-P -
3 CSI-CLK-P -
4 GND -
5 CSI-DATA0-P -
6 CSI-DATA0-N -
7 GND -
8 CSI-DATA1-P -
9 CSI-DATA1-N -
10 GND -
11 CSI-DATA2-P -
12 CSI-DATA2-N -
13 GND
14 CSI-DATA3-P -
15 CSI-DATA3-N -
16 GND -
17 I2C2-SCL Camera confguration I2C interface (3.3V)
18 I2C2-SDA Camera confguration I2C interface (3.3V)
19 GND -
20 SAI3-TXFS Optional audio interface
21 SAI3-TXC Optional audio interface
22 - -
23 GND -
24 +3.3V Power supply for external devices
25 +3.3V Power supply for external devices
26 +5V Power supply for external devices
27 +5V Power supply for external devices
28 - -
29 - -
30 GND -

Note:
1. 1st pin of J302 connector is at the top of the image.

Display MIPI-DSI interface (J301, FPC/FFC 0.5mm)

VisionCB-8Mmini-mipi-dsi.png
Pin Signal Description
1 GND -
2 DSI-CLK-P -
3 DSI-CLK-P -
4 GND -
5 DSI-DATA0-P -
6 DSI-DATA0-N -
7 GND -
8 DSI-DATA1-P -
9 DSI-DATA1-N -
10 GND -
11 DSI-DATA2-P -
12 DSI-DATA2-N -
13 GND
14 DSI-DATA3-P -
15 DSI-DATA3-N -
16 GND -
17 I2C2-SCL Display confguration I2C interface (3.3V)
18 I2C2-SDA Display confguration I2C interface (3.3V)
19 GND -
20 SAI3-RXFS Optional display reset signal
21 GPIO5-IO23 Optional touch-panel interrupt signal (with 47k pull-up)
22 SPDIF-TX Optional touch-panel controller reset
23 GND -
24 +3.3V Power supply for external devices
25 +3.3V Power supply for external devices
26 +5V Power supply for external devices
27 +5V Power supply for external devices
28 SPDIF-RX Optional backlight intensity PWM controller
29 SPDIF-CLK Optional backlight enable
30 GND -

Note:
1. 1st pin of J301 connector is at the top of the image.

USB Console Port and Segger J-Link debugger

VisionCB-8Mmini-console-jlink.png
MPU Port GPIO Description
CONSOLE-TXD UART4-TXD Signal connected to J304 pin 2
CONSOLE-RXD UART4-RXD Signal connected to J304 pin 3

Notes:
1. Linux console port (UART4 in MPU) uses vCOM interface provided by built-in debugger Segger J-Link.
2. vCOM can be disconnected from MPU with JP801 (jumper CONSOLE in position ON or OFF).
3. Lines TXD and RXD of UART4 are easy to monitoring thanks to using J304 gold-pins.
4. Debug JTAG interface can be disconnected from MPU with JP800 (jumper JTAG in position ON or OFF).

MicroSD card interface (J308)

VisionCB-8Mmini-sdcard.png


Connector pin SD card signal SOM pin
1 DATA2 SD1-DATA0
2 DATA3 SD1-DATA3
3 CMD SD1-CMD
4 NVCC-SDIO Voltage selected 1.8/3.3V by SD1 driver
5 CLK SD1-CLK
6 GND -
7 DATA0 SD1-DATA0
8 DATA1 SD1-DATA1
9 CARD-DETECT SD1-CD

Raspberry Pi compatible I/O header

VisionCB-8Mmini-rpiconn.png


Pin Default function name Description
1 +3.3V +3.3V generated by DC/DC built-in SOM (limited current load)
2 +5V +5V generated by carrier board built-in DC/DC converter
3 I2C1-SDA I2C1-SDA line
4 +5V +5V generated by carrier board built-in DC/DC converter
5 I2C1-SDA I2C1-SDA line
6 GND -
7 GPIO4-IO09 Universal GPIO with 3.3V logic levels
8 UART3-TXD Default: UART3 TXD line or universal GPIO with 3.3V logic levels
9 GND -
10 UART3-RXD Default: UART3 RXD line or universal GPIO with 3.3V logic levels
11 GPIO4-IO08 Universal GPIO with 3.3V logic levels
12 SPI2-CLK Default: SPI2-CLK line or universal GPIO with 3.3V logic levels
13 - -
14 GND -
15 - -
16 SPI2-MISO Default: SPI2-MISO line or universal GPIO with 3.3V logic levels
17 +3.3V +3.3V generated by DC/DC built-in SOM (limited current load)
18 SPI2-MOSI Default: SPI2-MOSI line or universal GPIO with 3.3V logic levels
19 SPI1-MOSI Default: SPI1-MOSI line or universal GPIO with 3.3V logic levels
20 GND -
21 SPI1-MISO Default: SPI1-MISO line or universal GPIO with 3.3V logic levels
22 SPI2-SS0 Default: SPI2-SS0 line or universal GPIO with 3.3V logic levels
23 SPI1-CLK Default: SPI1-CLK line or universal GPIO with 3.3V logic levels
24 SPI1-SS0 Default: SPI1-SS0 line or universal GPIO with 3.3V logic levels
25 GND -
26 GPIO-IO22 Universal GPIO with 3.3V logic levels
27 - -
28 - -
29 GPIO4-IO12 Universal GPIO with 3.3V logic levels
30 GND -
31 GPIO4-IO13 Universal GPIO with 3.3V logic levels
32 GPIO4-IO20 Universal GPIO with 3.3V logic levels
33 GPIO4-IO14 Universal GPIO with 3.3V logic levels
34 GND -
35 GPIO4-IO14 Universal GPIO with 3.3V logic levels
36 GPIO4-IO19 Universal GPIO with 3.3V logic levels
37 GPIO4-IO16 Universal GPIO with 3.3V logic levels
38 GPIO4-IO18 Universal GPIO with 3.3V logic levels
39 GND -
40 GPIO4-IO17 Universal GPIO with 3.3V logic levels

Arduino Uno compatible I/O header

VisionCB-8Mmini-arduino.png


Pin Arduino name Default function name Description
Power connector J700, red connector
1 - - -
2 IOREF VDD-ARDUINO-IO Selected +3.3V or +5V (with V-ARD jumper).
3 RESET POR-B External reset input, active L.
4 3.3V VCC-3V3 +3.3V generated by internal SOM LDO converter (limited load current).
5 5V VCC-5V0 +5V generated by carrier board built-in DC/DC converter.
6 GND GND -
7 GND GND -
8 VIN VCC-3V3 +3.3V generated by internal SOM LDO converter (limited load current).
Analog inputs connector J702, blue connector
1 AIN0 - Not internally connected.
2 AIN1 - Not internally connected.
3 AIN2 - Not internally connected.
4 AIN3 - Not internally connected.
5 - - Not internally connected.
6 - - Not internally connected.
Digital I/Os connector J704, yellow connector
1 DIO0 UART3-RXD Default: UART3-RXD line or universal GPIO with 3.3/5V logic levels.
2 DIO1 UART3-TXD Default: UART3-TXD line or universal GPIO with 3.3/5V logic levels.
3 DIO2 GPIO4-IO15 Universal GPIO with 3.3/5V logic levels.
4 DIO3 GPIO4-IO14 Universal GPIO with 3.3/5V logic levels.
5 DIO4 GPIO4-IO13 Universal GPIO with 3.3/5V logic levels.
6 DIO5 GPIO4-IO12 Universal GPIO with 3.3/5V logic levels.
7 DIO6 GPIO4-IO11 Universal GPIO with 3.3/5V logic levels.
8 DIO7 GPIO4-IO10 Universal GPIO with 3.3/5V logic levels.
Digital I/Os connector J703, yellow connector
1 DIO8 GPIO4-IO08 Universal GPIO with 3.3/5V logic levels.
2 DIO9 GPIO4-IO09 Universal GPIO with 3.3/5V logic levels.
3 DIO10 SPI1-SS0 Default: SPI1-SS0 line or universal GPIO with 3.3/5V logic levels.
4 DIO11 SPI1-MOSI Default: SPI1-MOSI line or universal GPIO with 3.3/5V logic levels.
5 DIO12 SPI1-MISO Default: SPI1-MISO line or universal GPIO with 3.3/5V logic levels.
6 DIO13 SPI1-CLK Default: SPI1-CLK line or universal GPIO with 3.3/5V logic levels.
7 GND GND -
8 AREF VDD-ARDUINO-IO +3.3V or +5V selected with V-ARD jumper.
9 DIO14 I2C1-SCL Default: I2C1-SCL line or universal GPIO with 3.3/5V logic levels.
10 DIO15 I2C1-SDA Default: I2C1-SDA line or universal GPIO with 3.3/5V logic levels.

Notes:
1. I/O logic levels are selected 3.3/5V with V-ARD jumper.
2. RESET line is 3.3 and 5V compatible.

Serial Communication/GPIO header (J305)

VisionCB-8Mmini-serialcommGPIO.png


Pin Default function name Description
1 +3.3V +3.3V generated by DC/DC built-in SOM (limited current load)
2 GPIO5-IO23 Universal GPIO with 3.3V logic levels
By default is connected to MIPI-DSI (J301) as touch-panel interrupt line (with 47k pull-up)
3 UART2-CTS By default: UART2-CTS or universal GPIO with 3.3V logic levels
4 SAI3-TXFS By default: SAI3-TXFS or universal GPIO with 3.3V logic levels
Connected to MIPI-CSI (J302)
5 UART2-RTS By default: UART2-RTS or universal GPIO with 3.3V logic levels
6 SAI3-TXC By default: SAI3-TXC or universal GPIO with 3.3V logic levels
Connected to MIPI-CSI (J302)
7 UART2-RXD By default: UART2-RXD or universal GPIO with 3.3V logic levels
8 SAI3-TXD By default: SAI3-TXD or universal GPIO with 3.3V logic levels
9 UART2-TXD By default: UART2-TXD or universal GPIO with 3.3V logic levels
10 SAI3-RXFS By default: SAI3-RXFS or universal GPIO with 3.3V logic levels
By default is connected to MIPI-DSI (J301) as display module reset signal
11 I2C2-SCL By default: I2C2-SCL or universal GPIO with 3.3V logic levels
Default I2C port for PCIe (J303), MIPI-DSI (J301) and MIPI-CSI (J302)
12 SAI3-MCLK By default: SAI3-MCLK or universal GPIO with 3.3V logic levels
13 I2C2-SDA By default: I2C2-SDA or universal GPIO with 3.3V logic levels
Default I2C port for PCIe (J303), MIPI-DSI (J301) and MIPI-CSI (J302)
14 SPDIF-TX By default: SPDIC-TX or universal GPIO with 3.3V logic levels
By default is connected to MIPI-DSI (J301) as touch-panel reset signal
15 I2C3-SCL By default: I2C3-SCL or universal GPIO with 3.3V logic levels
16 SPDIF-RX By default: I2C3-SCL or universal GPIO with 3.3V logic levels
By default is connected to MIPI-DSI (J301) as display module PWM backlight control
17 I2C3-SDA By default: I2C3-SDA or universal GPIO with 3.3V logic levels
18 SPDIF-CLK By default: SPDIF-CLK or universal GPIO with 3.3V logic levels
By default is connected to MIPI-DSI (J301) as display module on/off signal
19 GND -
20 GND -

User Interface (switches and LEDs)

VisionCB-8Mmini-userinterface.png


User switches

Switch GPIO Description
S305 (black, most on the left) GPIO4-IO03 47k pull-up
S304 GPIO4-IO02 47k pull-up
S303 GPIO4-IO01 47k pull-up
S302 (black, most on the right) GPIO4-IO00 47k pull-up


System switches

Switch Signal name Description
S301 (left, red) Reset -
S300 (right, red) BOOT-RECOVERY -


User LEDs

LED GPIO Description
D303 (most on the left) GPIO4-IO04 User LED1, buffered with inverter
D302 GPIO4-IO05 User LED2, buffered with inverter
D301 GPIO4-IO06 User LED3, buffered with inverter
D300 (most on the right) GPIO4-IO07 User LED4, buffered with inverter


System LEDs

LED GPIO Description
D304 SYS-LED System function monitoring
D305 - Power LED (3.3V)


Dimensions

VisionCB-8Mmini-v11-dimension.png
NXP Partner ST Partner Renesas Partner