VisionCB-RT-STD
From SomLabs Wiki
Revision as of 11:31, 5 February 2019 by Wlodzimierzhepner (talk | contribs)
| VisionCB-RT-STD |
|
VisionCB-RT-STD is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX RT application processors (ARM Cortex-M7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, UART, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product. |
| Specifications |
| CPU | VisionSOM-RT - System on Module with NXP i.MX RT application procesor |
| Memory | on-chip 512kB RAM (depends on used VisionSOM) or 32MB SDRAM |
| Display | 24-bit RGB parallel interface |
| Camera | up to 24-bit CSI interface |
| Storage | 4 or 16MB QSPI Flash (depends on used VisionSOM) |
| Network | 1x Ethernet 10/100Mbit/s, RJ45 |
| USB | USB2.0 Host |
| Temperature Range | 0 to +70°C |
| Dimensions | 145mm x 90mm x 17mm |
