Personal tools

Difference between revisions of "VisionCB-STD"

From SomLabs Wiki

Jump to: navigation, search
Line 1: Line 1:
{{Product|category1=SOM|category2=|image=VisionCB-STD.png
+
{{Product|category1=SOM|category2=|image=800px-VisionCB-STD-1-4-1k.png.png
 
|cpu=VisionSOM-6UL - System on Module with NXP i.MX6UL application procesor<br>or<br>VisionSOM-6ULL - System on Module with NXP i.MX6ULL application procesor
 
|cpu=VisionSOM-6UL - System on Module with NXP i.MX6UL application procesor<br>or<br>VisionSOM-6ULL - System on Module with NXP i.MX6ULL application procesor
 
|ram=up to 512MB DDR3L <br>(depends on used VisionSOM)
 
|ram=up to 512MB DDR3L <br>(depends on used VisionSOM)

Revision as of 12:55, 16 April 2018

VisionCB-STD
VisionCB-STD VisionCB-STD is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX 6UL or i.MX 6ULL application processors (ARM Cortex-A7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, UART, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.
Specifications
CPUVisionSOM-6UL - System on Module with NXP i.MX6UL application procesor
or
VisionSOM-6ULL - System on Module with NXP i.MX6ULL application procesor
Memoryup to 512MB DDR3L
(depends on used VisionSOM)
Display24-bit RGB parallel interface
Cameraup to 24-bit CSI interface
StorageuSD card
or up to 32GB eMMC
or up to 512MB NAND Flash
(depends on used VisionSOM)
Network1x Ethernet 10/100Mbit/s, RJ45
Wi-Fi 802.11b/g/n
(depends on used VisionSOM)
USB2x USB2.0 OTG Host/Device
Temperature Range0 to +70°C
Dimensions130mm x 90mm x 17mm
NXP Partner ST Partner Renesas Partner