Personal tools

Difference between revisions of "VisionCB-STD Power Supply"

From SomLabs Wiki

Jump to: navigation, search
(Created page with "{{PageHeader|VisionCB-STD Power Supply}} There are two ways to provide power supply to VisionCB-STD: * through 9-12VDC connector (2.1x5.5 Barrel Jack, Center-Positive). We rec...")
 
 
Line 2: Line 2:
 
There are two ways to provide power supply to VisionCB-STD:
 
There are two ways to provide power supply to VisionCB-STD:
 
* through 9-12VDC connector (2.1x5.5 Barrel Jack, Center-Positive). We recommend to use [http://somlabs.com/category/products/accessories/power-supplies/ 12V/2A power supplies].
 
* through 9-12VDC connector (2.1x5.5 Barrel Jack, Center-Positive). We recommend to use [http://somlabs.com/category/products/accessories/power-supplies/ 12V/2A power supplies].
* through micro-USB connector (PWR-C). Standard PC USB port provides 5V/500mA, it will be enough to supply basic configuration (VisionSOM-6ULL + VisionCB-STD). If you want to connect additional equipment (USB Hard Drives, Display etc.) you may need to either connect additional power supply through 9-12VDC or connect PWR-C to power supply with micro-USB plug (in this case you will not be able to access VisionCB-STF USB-UART converter).
+
* through micro-USB connector (PWR-C). Standard PC USB port provides 5V/500mA, it will be enough to supply basic configuration (VisionSOM-6ULL + VisionCB-STD). If you want to connect additional equipment (USB Hard Drives, Display etc.) you may need to either connect additional power supply through 9-12VDC or connect PWR-C to power supply with micro-USB plug (in this case you will not be able to access VisionCB-STD USB-UART converter).
 
[[File:Visioncb-std-power-supply.png|center|VisionCB-STD power supply options]]
 
[[File:Visioncb-std-power-supply.png|center|VisionCB-STD power supply options]]

Latest revision as of 23:25, 3 November 2017

VisionCB-STD Power Supply


There are two ways to provide power supply to VisionCB-STD:

  • through 9-12VDC connector (2.1x5.5 Barrel Jack, Center-Positive). We recommend to use 12V/2A power supplies.
  • through micro-USB connector (PWR-C). Standard PC USB port provides 5V/500mA, it will be enough to supply basic configuration (VisionSOM-6ULL + VisionCB-STD). If you want to connect additional equipment (USB Hard Drives, Display etc.) you may need to either connect additional power supply through 9-12VDC or connect PWR-C to power supply with micro-USB plug (in this case you will not be able to access VisionCB-STD USB-UART converter).
VisionCB-STD power supply options
NXP Partner ST Partner