Difference between revisions of "VisionSOM-RT"
From SomLabs Wiki
| Line 1: | Line 1: | ||
{{Product|category1=SOM|category2=|image=VisionSOM-RT-v_1_1.png | {{Product|category1=SOM|category2=|image=VisionSOM-RT-v_1_1.png | ||
|cpu=NXP i.MX RT Cortex-M7 32-bit processor (CPU clock up to 600MHz) | |cpu=NXP i.MX RT Cortex-M7 32-bit processor (CPU clock up to 600MHz) | ||
| − | |ram=512kB on-chip RAM | + | |ram=512kB on-chip RAM, up to 32MB SDRAM |
|storage=4 or 16MB QSPI Flash | |storage=4 or 16MB QSPI Flash | ||
|gfx= NXP PXP 2D <br>graphics accelerator for LCD-TFT | |gfx= NXP PXP 2D <br>graphics accelerator for LCD-TFT | ||
Revision as of 17:17, 1 February 2019
| VisionSOM-RT |
|
VisionSOM-RT is comprised of a small processor module with CPU bus accessibility and standard I/O functionality and is an ideal solution for embedded projects. VisionSOM-RT can often trim 8-12 months from design cycle and can be easy adapted to existing projects or can be used together with a dedicated carrier board. Customers who are looking for a complete solution can use a set comprised of System on Module (SoM) and Carrier Board (CB). VisionSOM-RT requires a matching customer’s board or a carrier board to establish a complete system. Carrier Board together with VisionSOM-RT is ready to use computer on board and is giving enormous flexibility in building projects. |
Documentation
| Specifications |
| CPU | NXP i.MX RT Cortex-M7 32-bit processor (CPU clock up to 600MHz) |
| Memory | 512kB on-chip RAM, up to 32MB SDRAM |
| GPU | NXP PXP 2D graphics accelerator for LCD-TFT |
| Display | 24-bit RGB parallel interface |
| Storage | 4 or 16MB QSPI Flash |
| I2C | up to 4 channels |
| SPI | up to 4 channels |
| CAN | up to 2 FlexCAN |
| UART | up to 8 channels |
| USB | 2 x USB2.0 OTG |
| Audio | 3 x I2S/SAI, S/PDIF Tx/Rx |
| Temperature Range | -40 to +85°C |
| Dimensions | 67mm x 32mm x 4mm SODIMM200 module |
