Personal tools

Difference between revisions of "VisionSOM-RT Datasheet and Pinout"

From SomLabs Wiki

Jump to: navigation, search
(→‎SOM pinout)
(→‎Electrical parameters)
Line 263: Line 263:
 
2. Applying the maximum voltage 3.6V results in shorten lifetime. Recommended value is smaller than 3.5V.<br />
 
2. Applying the maximum voltage 3.6V results in shorten lifetime. Recommended value is smaller than 3.5V.<br />
  
−
{| {{table}}
+
 
−
| align="center" style="background:#f0f0f0;"|'''SODIMM pin'''
+
== Pinout ==
−
| align="center" style="background:#f0f0f0;"|'''"Functional'''
+
^ SODIMM pin ^ "Functional ^
−
|-
+
| domain" | "Function |
−
| domain"||"Function
+
| name" | "i.MX-RT |
−
|-
+
| Pad Name" | "Description |
−
| name"||"i.MX-RT  
+
| (refer to i.MX-RT manuals for details)" |
−
|-
+
| 1 | Power | GND | - | - |
−
| Pad Name"||"Description  
+
| 2 | Power | GND | - | - |
−
|-
+
| 3 | Ctrl | PMIC-STBY-REQ | CCM_PMIC_STBY_REQ | Output
−
| (refer to i.MX-RT manuals for details)"
+
leave open if not used. |
−
|-
+
| 4 | Ctrl | POR-B | - | External warm reset input
−
| 1||Power||GND||-||-
+
active L. |
−
|-
+
| 5 | Ctrl | PMIC-ON-REQ | SNVS_PMIC_ON_REQ | Output
−
| 2||Power||GND||-||-
+
leave open if not used. |
−
|-
+
| 6 | Power | VDD-SNVS-3V3 | VDD_SNVS_IN | "SNVS backup power supply must be held between 2.9V and 3.3V if the system requires keeping real time and other data on OFF state. |
−
| 3||Ctrl||PMIC-STBY-REQ||CCM_PMIC_STBY_REQ||Output, leave open if not used.
+
| Internally connected to +3.3V
−
|-
+
leave open." |
−
| 4||Ctrl||POR-B||-||External warm reset input, active L.
+
| 7 | BOOT | BOOT-MODE1 | GPIO_AD_B0_05 | BOOT1 configuration line or multifunction GPIO with 3.3V logic levels. |
−
|-
+
| 8 | Power | VDD-COIN-3V | VDD_SNVS_IN | "Optional external coin battery for SNVS power domain
−
| 5||Ctrl||PMIC-ON-REQ||SNVS_PMIC_ON_REQ||Output, leave open if not used.
+
must be held between 2.9V and 3.3V if the system requires keeping real time and other data on OFF state. |
−
|-
+
| Leave open if not used." |
−
| 6||Power||VDD-SNVS-3V3||VDD_SNVS_IN||"SNVS backup power supply must be held between 2.9V and 3.3V if the system requires keeping real time and other data on OFF state.  
+
| 9 | BOOT | BOOT-MODE0 | GPIO_AD_B0_04 | "BOOT1 configuration line or multifunction GPIO with 3.3V logic levels. |
−
|-
+
| Pin shared with GPIO-4 line." |
−
| Internally connected to +3.3V, leave open."
+
| 10 | NC | - | - | Not internally connected. |
−
|-
+
| 11 | USB | USB-OTG2-VBUS | USB_OTG2_VBUS | +5V USB bus. Leave open if not used. |
−
| 7||BOOT||BOOT-MODE1||GPIO_AD_B0_05||BOOT1 configuration line or multifunction GPIO with 3.3V logic levels.
+
| 12 | NC | - | - | Not internally connected. |
−
|-
+
| 13 | USB | USB-OTG1-VBUS | USB_OTG1_VBUS | +5V USB bus. Leave open if not used. |
−
| 8||Power||VDD-COIN-3V||VDD_SNVS_IN||"Optional external coin battery for SNVS power domain, must be held between 2.9V and 3.3V if the system requires keeping real time and other data on OFF state.
+
| 14 | Ctrl | ONOFF | ONOFF | Input for power interrupt generation. Leave open if not used. |
−
|-
+
| 15 | Power | GND | - | - |
−
| Leave open if not used."
+
| 16 | Ctrl | POR-B | POR_B | "Cold reset negative logic input resets all modules and logic in the IC. |
−
|-
+
| May be used in addition to internally generated power on reset signal (logical AND
−
| 9||BOOT||BOOT-MODE0||GPIO_AD_B0_04||"BOOT1 configuration line or multifunction GPIO with 3.3V logic levels.
+
both internal |
−
|-
+
| and external signals are considered active low)." |
−
| Pin shared with GPIO-4 line."
+
| 17 | Power | GND | - | - |
−
|-
+
| 18 | NC | - | - | Not internally connected. |
−
| 10||NC||-||-||Not internally connected.
+
| 19 | USB | USB-OTG2-DP | USB_OTG2_DP | Leave open if not used. |
−
|-
+
| 20 | Power | GND | - | - |
−
| 11||USB||USB-OTG2-VBUS||USB_OTG2_VBUS||+5V USB bus. Leave open if not used.
+
| 21 | USB | USB-OTG2-DN | USB_OTG2_DN | Leave open if not used. |
−
|-
+
| 22 | Power | GND | - | - |
−
| 12||NC||-||-||Not internally connected.
+
| 23 | Power | GND | - | - |
−
|-
+
| 24 | NC | - | - | Not internally connected. |
−
| 13||USB||USB-OTG1-VBUS||USB_OTG1_VBUS||+5V USB bus. Leave open if not used.
+
| 25 | USB | USB-OTG1-DP | USB_OTG1_DP | Leave open if not used. |
−
|-
+
| 26 | Power | GND | - | - |
−
| 14||Ctrl||ONOFF||ONOFF||Input for power interrupt generation. Leave open if not used.
+
| 27 | USB | USB-OTG1-DN | USB_OTG1_DN | Leave open if not used. |
−
|-
+
| 28 | Power | GND | - | - |
−
| 15||Power||GND||-||-
+
| 29 | Power | GND | - | - |
−
|-
+
| 30 | NC | - | - | Not internally connected. |
−
| 16||Ctrl||POR-B||POR_B||"Cold reset negative logic input resets all modules and logic in the IC.
+
| 31 | USB | nUSB-OTG-CHD | USB_OTG1_CHD_B | Leave open if not used. |
−
|-
+
| 32 | - | - | - | Not internally connected. |
−
| May be used in addition to internally generated power on reset signal (logical AND, both internal
+
| 33 | JTAG | JTAG-MOD | GPIO_AD_B0_08 | "JTAG mode selector. |
−
|-
+
| multifunction GPIO with 3.3V levels. |
−
| and external signals are considered active low)."
+
| Leave open if not used (bulit-in 4.7k pull-down resistor)." |
−
|-
+
| 34 | - | - | - | Not internally connected. |
−
| 17||Power||GND||-||-
+
| 35 | Power | GND | - | - |
−
|-
+
| 36 | - | - | - | Not internally connected. |
−
| 18||NC||-||-||Not internally connected.
+
| 37 |   | CLK1-N | CCM_CLK1_N | "General purpose differential high speed clock input/output. |
−
|-
+
| Leave open if not used." |
−
| 19||USB||USB-OTG2-DP||USB_OTG2_DP||Leave open if not used.
+
| 38 | Power | GND | - | - |
−
|-
+
| 39 | | CLK1-P | CCM_CLK1_P | "General purpose differential high speed clock input/output. |
−
| 20||Power||GND||-||-
+
| Leave open if not used." |
−
|-
+
| 40 | Power | GND | - | - |
−
| 21||USB||USB-OTG2-DN||USB_OTG2_DN||Leave open if not used.
+
| 41 | Power | GND | - | - |
−
|-
+
| 42 | NC | - | - | Not internally connected. |
−
| 22||Power||GND||-||-
+
| 43 | JTAG | JTAG-TDI | GPIO_AD_B0_09 | "JTAG TDI input line. |
−
|-
+
| Multifunction GPIO with 3.3V logic levels." |
−
| 23||Power||GND||-||-
+
| 44 | NC | - | - | Not internally connected. |
−
|-
+
| 45 | GPIO | GPIO-B1-09 | GPIO_AD_B1_09 | Multifunction GPIO with 3.3V logic levels. |
−
| 24||NC||-||-||Not internally connected.
+
| 46 | JTAG | JTAG-TMS | GPIO_AD_B0_06 | "JTAG TMS input line. |
−
|-
+
| Multifunction GPIO with 3.3V logic levels." |
−
| 25||USB||USB-OTG1-DP||USB_OTG1_DP||Leave open if not used.
+
| 47 | GPIO | GPIO-4 | GPIO_AD_B0_04 | "Multifunction GPIO with 3.3V logic levels. |
−
|-
+
| Pin shared with BOOT-MODE0 line." |
−
| 26||Power||GND||-||-
+
| 48 | JTAG | JTAG-nTRST | GPIO_AD_B0_11 | "JTAG nTRST input line. |
−
|-
+
| Multifunction GPIO with 3.3V logic levels." |
−
| 27||USB||USB-OTG1-DN||USB_OTG1_DN||Leave open if not used.
+
| 49 | GPIO | GPIO-B1-11 | GPIO_AD_B1_11 | Multifunction GPIO with 3.3V logic levels. |
−
|-
+
| 50 | Power | GND | - | - |
−
| 28||Power||GND||-||-
+
| 51 | Power | GND | - | - |
−
|-
+
| 52 | JTAG | JTAG-TDO | GPIO_AD_B0_10 | "JTAG TDO ouput line. |
−
| 29||Power||GND||-||-
+
| Multifunction GPIO with 3.3V logic levels." |
−
|-
+
| 53 | GPIO | ENET-MDC | GPIO_EMC_40 | Multifunction GPIO with 3.3V logic levels. |
−
| 30||NC||-||-||Not internally connected.
+
| 54 | JTAG | JTAG-TCK | GPIO_AD_B0_07 | "JTAG TCK input line. |
−
|-
+
| Multifunction GPIO with 3.3V logic levels." |
−
| 31||USB||nUSB-OTG-CHD||USB_OTG1_CHD_B||Leave open if not used.
+
| 55 | GPIO | GPIO-3 | GPIO_AD_B0_03 | Multifunction GPIO with 3.3V logic levels. |
−
|-
+
| 56 | GPIO | GPIO-B1-14 | GPIO_AD_B1_14 | Multifunction GPIO with 3.3V logic levels. |
−
| 32||-||-||-||Not internally connected.
+
| 57 | COM-GPIO | UART1-TXD | GPIO_AD_B0_12 | "UART1 TxD output |
−
|-
+
| or multifunction GPIO with 3.3V logic levels." |
−
| 33||JTAG||JTAG-MOD||GPIO_AD_B0_08||"JTAG mode selector.  
+
| 58 | GPIO | GPIO-2 | GPIO_AD_B0_02 | Multifunction GPIO with 3.3V logic levels. |
−
|-
+
| 59 | Power | GND | - | - |
−
| multifunction GPIO with 3.3V levels.  
+
| 60 | Power | GND | - | - |
−
|-
+
| 61 | GPIO | ENET-MDIO | GPIO_EMC_41 | Multifunction GPIO with 3.3V logic levels. |
−
| Leave open if not used (bulit-in 4.7k pull-down resistor)."
+
| 62 | GPIO | GPIO-1 | GPIO_AD_B0_01 | Multifunction GPIO with 3.3V logic levels. |
−
|-
+
| 63 | COM-GPIO | UART1-RXD | GPIO_AD_B0_13 | "UART1 RxD input |
−
| 34||-||-||-||Not internally connected.
+
| or multifunction GPIO with 3.3V logic levels." |
−
|-
+
| 64 | GPIO | GPIO-0 | GPIO_AD_B0_00 | Multifunction GPIO with 3.3V logic levels. |
−
| 35||Power||GND||-||-
+
| 65 | COM-GPIO | UART2-TXD | GPIO_AD_B1_02 | "UART2 TxD output |
−
|-
+
| or multifunction GPIO with 3.3V logic levels." |
−
| 36||-||-||-||Not internally connected.
+
| 66 | COM-GPIO | UART1-CTS | GPIO_AD_B0_14 | "UART1 CTS output |
−
|-
+
| or multifunction GPIO with 3.3V logic levels." |
−
| 37|| ||CLK1-N||CCM_CLK1_N||"General purpose differential high speed clock input/output.
+
| 67 | COM-GPIO | UART2-RXD | GPIO_AD_B1_03 | "UART2 RxD input |
−
|-
+
| or multifunction GPIO with 3.3V logic levels." |
−
| Leave open if not used."
+
| 68 | COM-GPIO | UART5-RXD | GPIO_B1_13 | "UART5 RxD input |
−
|-
+
| or multifunction GPIO with 3.3V logic levels." |
−
| 38||Power||GND||-||-
+
| 69 | COM-GPIO | UART3-TXD | GPIO_AD_B1_06 | "UART3 TxD input |
−
|-
+
| or multifunction GPIO with 3.3V logic levels." |
−
| 39||||CLK1-P||CCM_CLK1_P||"General purpose differential high speed clock input/output.
+
| 70 | Power | GND | - | - |
−
|-
+
| 71 | Power | GND | - | - |
−
| Leave open if not used."
+
| 72 | COM-GPIO | UART2-CTS | GPIO_AD_B1_00 | "UART2 CTS output |
−
|-
+
| or multifunction GPIO with 3.3V logic levels." |
−
| 40||Power||GND||-||-
+
| 73 | COM-GPIO | UART3-RXD | GPIO_AD_B1_07 | "UART3 RxD input |
−
|-
+
| or multifunction GPIO with 3.3V logic levels." |
−
| 41||Power||GND||-||-
+
| 74 | COM-GPIO | UART1-RTS | GPIO_AD_B0_15 | "UART1 RTS input |
−
|-
+
| or multifunction GPIO with 3.3V logic levels." |
−
| 42||NC||-||-||Not internally connected.
+
| 75 | NC | - | - | Not internally connected. |
−
|-
+
| 76 | COM-GPIO | UART3-CTS | GPIO_AD_B1_04 | "UART3 CTS output |
−
| 43||JTAG||JTAG-TDI||GPIO_AD_B0_09||"JTAG TDI input line.  
+
| or multifunction GPIO with 3.3V logic levels." |
−
|-
+
| 77 | NC | - | - | Not internally connected. |
−
| Multifunction GPIO with 3.3V logic levels."
+
| 78 | COM-GPIO | UART2-RTS | GPIO_AD_B1_01 | "UART2 RTS input |
−
|-
+
| or multifunction GPIO with 3.3V logic levels." |
−
| 44||NC||-||-||Not internally connected.
+
| 79 | COM-GPIO | UART5-TXD | GPIO_B1_12 | "UART5 TxD output |
−
|-
+
| or multifunction GPIO with 3.3V logic levels." |
−
| 45||GPIO||GPIO-B1-09||GPIO_AD_B1_09||Multifunction GPIO with 3.3V logic levels.
+
| 80 | COM-GPIO | UART3-RTS | GPIO_AD_B1_05 | "UART3 RTS input |
−
|-
+
| or multifunction GPIO with 3.3V logic levels." |
−
| 46||JTAG||JTAG-TMS||GPIO_AD_B0_06||"JTAG TMS input line.  
+
| 81 | Power | GND | - | - |
−
|-
+
| 82 | Power | GND | - | - |
−
| Multifunction GPIO with 3.3V logic levels."
+
| 83 | NC | - | - | Not internally connected. |
−
|-
+
| 84 | Power | GND | - | - |
−
| 47||GPIO||GPIO-4||GPIO_AD_B0_04||"Multifunction GPIO with 3.3V logic levels.
+
| 85 | Power | +3.3VOUT | - | +3.3V generated by SOM's LDO. |
−
|-
+
| 86 | NC | - | - | Not internally connected. |
−
| Pin shared with BOOT-MODE0 line."
+
| 87 | Power | +3.3VOUT | - | +3.3V generated by SOM's LDO. |
−
|-
+
| 88 | Power | +3.3VOUT | - | +3.3V generated by SOM's LDO. |
−
| 48||JTAG||JTAG-nTRST||GPIO_AD_B0_11||"JTAG nTRST input line.  
+
| 89 | Power | +3.3VOUT | - | +3.3V generated by SOM's LDO. |
−
|-
+
| 90 | Power | +3.3VOUT | - | +3.3V generated by SOM's LDO. |
−
| Multifunction GPIO with 3.3V logic levels."
+
| 91 | Power | +3.3VOUT | - | +3.3V generated by SOM's LDO. |
−
|-
+
| 92 | Power | +3.3VOUT | - | +3.3V generated by SOM's LDO. |
−
| 49||GPIO||GPIO-B1-11||GPIO_AD_B1_11||Multifunction GPIO with 3.3V logic levels.
+
| 93 | Power | +3.3VOUT | - | +3.3V generated by SOM's LDO. |
−
|-
+
| 94 | NC | - | - | Not internally connected. |
−
| 50||Power||GND||-||-
+
| 95 | NC | - | - | Not internally connected. |
−
|-
+
| 96 | Power | +5VIN | - | +4.0-5.5V input power supply. |
−
| 51||Power||GND||-||-
+
| 97 | Ethernet | ENET1-RXD0 | GPIO_B1_04 | Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels. |
−
|-
+
| 98 | Power | +5VIN | - | +4.0-5.5V input power supply. |
−
| 52||JTAG||JTAG-TDO||GPIO_AD_B0_10||"JTAG TDO ouput line.  
+
| 99 | Ethernet | ENET1-RXD1 | GPIO_B1_05 | Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels. |
−
|-
+
| 100 | Power | +5VIN | - | +4.0-5.5V input power supply. |
−
| Multifunction GPIO with 3.3V logic levels."
+
| 101 | Ethernet | ENET1-CRS-DV | GPIO_B1_06 | Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels. |
−
|-
+
| 102 | Power | +5VIN | | +4.0-5.5V input power supply. |
−
| 53||GPIO||ENET-MDC||GPIO_EMC_40||Multifunction GPIO with 3.3V logic levels.
+
| 103 | Power | GND | - | - |
−
|-
+
| 104 | Power | +5VIN | | +4.0-5.5V input power supply. |
−
| 54||JTAG||JTAG-TCK||GPIO_AD_B0_07||"JTAG TCK input line.  
+
| 105 | NC | - | - | Not internally connected. |
−
|-
+
| 106 | Power | +5VIN | | +4.0-5.5V input power supply. |
−
| Multifunction GPIO with 3.3V logic levels."
+
| 107 | Power | GND | - | - |
−
|-
+
| 108 | Power | +5VIN | | +4.0-5.5V input power supply. |
−
| 55||GPIO||GPIO-3||GPIO_AD_B0_03||Multifunction GPIO with 3.3V logic levels.
+
| 109 | NC | - | - | Not internally connected. |
−
|-
+
| 110 | Power | +5VIN | - | +4.0-5.5V input power supply. |
−
| 56||GPIO||GPIO-B1-14||GPIO_AD_B1_14||Multifunction GPIO with 3.3V logic levels.
+
| 111 | Ethernet | ENET2-RXD0 | GPIO_AD_B1_14 | Ethernet MAC2-PHY interface signal or multifunction GPIO with 3.3V logic levels. |
−
|-
+
| 112 | Power | +5VIN | - | +4.0-5.5V input power supply. |
−
| 57||COM-GPIO||UART1-TXD||GPIO_AD_B0_12||"UART1 TxD output
+
| 113 | NC | - | - | Not internally connected. |
−
|-
+
| 114 | Ethernet | ENET1-TXEN | GPIO_B1_09 | Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels. |
−
| or multifunction GPIO with 3.3V logic levels."
+
| 115 | Power | GND | - | - |
−
|-
+
| 116 | Power | GND | - | - |
−
| 58||GPIO||GPIO-2||GPIO_AD_B0_02||Multifunction GPIO with 3.3V logic levels.
+
| 117 | Ethernet | ENET2-CRS-DV | GPIO_AD_B1_15 | Ethernet MAC2-PHY interface signal or multifunction GPIO with 3.3V logic levels. |
−
|-
+
| 118 | Ethernet | ENET1-TX-CLK | GPIO_B1_10 | "Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels. |
−
| 59||Power||GND||-||-
+
| In series is connected 10R resistor." |
−
|-
+
| 119 | Ethernet | ENET2-TXD1 | GPIO_AD_B1_13 | Ethernet MAC2-PHY interface signal or multifunction GPIO with 3.3V logic levels. |
−
| 60||Power||GND||-||-
+
| 120 | Power | GND | - | - |
−
|-
+
| 121 | Ethernet | ENET2-TXEN | GPIO_AD_B1_12 | Ethernet MAC2-PHY interface signal or multifunction GPIO with 3.3V logic levels. |
−
| 61||GPIO||ENET-MDIO||GPIO_EMC_41||Multifunction GPIO with 3.3V logic levels.
+
| 122 | Ethernet | ENET1-TXD0 | GPIO_B1_07 | Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels. |
−
|-
+
| 123 | Ethernet | ENET2-TXD0 | GPIO_B1_15 | Ethernet MAC2-PHY interface signal or multifunction GPIO with 3.3V logic levels. |
−
| 62||GPIO||GPIO-1||GPIO_AD_B0_01||Multifunction GPIO with 3.3V logic levels.
+
| 124 | Ethernet | ENET1-TXD1 | GPIO_B1_08 | Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels. |
−
|-
+
| 125 | Power | GND | - | - |
−
| 63||COM-GPIO||UART1-RXD||GPIO_AD_B0_13||"UART1 RxD input
+
| 126 | Ethernet | ENET1-RXER | GPIO_B1_11 | Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels. |
−
|-
+
| 127 | Power | GND | - | - |
−
| or multifunction GPIO with 3.3V logic levels."
+
| 128 | Power | GND | - | - |
−
|-
+
| 129 | LCD | LCD-DATA21 | GPIO_B1_01 | LCD interface signal or multifunction GPIO with 3.3V logic levels. |
−
| 64||GPIO||GPIO-0||GPIO_AD_B0_00||Multifunction GPIO with 3.3V logic levels.
+
| 130 | Power | GND | - | - |
−
|-
+
| 131 | LCD | LCD-DATA22 | GPIO_B1_02 | LCD interface signal or multifunction GPIO with 3.3V logic levels. |
−
| 65||COM-GPIO||UART2-TXD||GPIO_AD_B1_02||"UART2 TxD output
+
| 132 | Power | GND | - | - |
−
|-
+
| 133 | LCD | LCD-DATA17 | GND | Internally connected to GND. |
−
| or multifunction GPIO with 3.3V logic levels."
+
| 134 | LCD | LCD-DATA23 | GPIO_B1_03 | LCD interface signal or multifunction GPIO with 3.3V logic levels. |
−
|-
+
| 135 | Power | GND | - | - |
−
| 66||COM-GPIO||UART1-CTS||GPIO_AD_B0_14||"UART1 CTS output
+
| 136 | Power | GND | - | - |
−
|-
+
| 137 | LCD | LCD_DATA18 | GND | Internally connected to GND. |
−
| or multifunction GPIO with 3.3V logic levels."
+
| 138 | LCD | LCD-DATA19 | GPIO_B0_15 | LCD interface signal or multifunction GPIO with 3.3V logic levels. |
−
|-
+
| 139 | LCD | LCD-DATA13 | GPIO_B0_12 | LCD interface signal or multifunction GPIO with 3.3V logic levels. |
−
| 67||COM-GPIO||UART2-RXD||GPIO_AD_B1_03||"UART2 RxD input
+
| 140 | LCD | LCD-DATA20 | GPIO_B1_00 | LCD interface signal or multifunction GPIO with 3.3V logic levels. |
−
|-
+
| 141 | LCD | LCD-DATA14 | GPIO_B0_13 | LCD interface signal or multifunction GPIO with 3.3V logic levels. |
−
| or multifunction GPIO with 3.3V logic levels."
+
| 142 | LCD | LCD-DATA15 | GPIO_B0_14 | LCD interface signal or multifunction GPIO with 3.3V logic levels. |
−
|-
+
| 143 | LCD | LCD_DATA8 | GND | Internally connected to GND. |
−
| 68||COM-GPIO||UART5-RXD||GPIO_B1_13||"UART5 RxD input
+
| 144 | LCD | LCD-DATA16 | GND | Internally connected to GND. |
−
|-
+
| 145 | LCD | LCD-DATA9 | GND | Internally connected to GND. |
−
| or multifunction GPIO with 3.3V logic levels."
+
| 146 | Power | GND | - | - |
−
|-
+
| 147 | Power | GND | - | - |
−
| 69||COM-GPIO||UART3-TXD||GPIO_AD_B1_06||"UART3 TxD input
+
| 148 | LCD | LCD-DATA11 | GPIO_B0_10 | LCD interface signal or multifunction GPIO with 3.3V logic levels. |
−
|-
+
| 149 | LCD | LCD-DATA5 | GPIO_B0_06 | LCD interface signal or multifunction GPIO with 3.3V logic levels. |
−
| or multifunction GPIO with 3.3V logic levels."
+
| 150 | LCD | LCD-DATA12 | GPIO_B0_11 | LCD interface signal or multifunction GPIO with 3.3V logic levels. |
−
|-
+
| 151 | LCD | LCD-DATA6 | GPIO_B0_07 | LCD interface signal or multifunction GPIO with 3.3V logic levels. |
−
| 70||Power||GND||-||-
+
| 152 | LCD | LCD-DATA10 | GPIO_B0_09 | LCD interface signal or multifunction GPIO with 3.3V logic levels. |
−
|-
+
| 153 | LCD | LCD-DATA0 | GND | Internally connected to GND. |
−
| 71||Power||GND||-||-
+
| 154 | LCD | LCD-DATA3 | GPIO_B0_04 | LCD interface signal or multifunction GPIO with 3.3V logic levels. |
−
|-
+
| 155 | LCD | LCD-DATA1 | GND | Internally connected to GND. |
−
| 72||COM-GPIO||UART2-CTS||GPIO_AD_B1_00||"UART2 CTS output
+
| 156 | Power | GND | - | - |
−
|-
+
| 157 | LCD | LCD-RESET | GPIO_AD_B1_08 | LCD interface signal or multifunction GPIO with 3.3V logic levels. |
−
| or multifunction GPIO with 3.3V logic levels."
+
| 158 | LCD | LCD-DATA4 | GPIO_B0_05 | LCD interface signal or multifunction GPIO with 3.3V logic levels. |
−
|-
+
| 159 | Power | GND | - | - |
−
| 73||COM-GPIO||UART3-RXD||GPIO_AD_B1_07||"UART3 RxD input
+
| 160 | LCD | LCD-HSYNC | GPIO_B0_02 | LCD interface signal or multifunction GPIO with 3.3V logic levels. |
−
|-
+
| 161 | LCD | LCD-CLK | GPIO_B0_00 | LCD interface signal or multifunction GPIO with 3.3V logic levels. |
−
| or multifunction GPIO with 3.3V logic levels."
+
| 162 | LCD | LCD-VSYNC | GPIO_B0_03 | LCD interface signal or multifunction GPIO with 3.3V logic levels. |
−
|-
+
| 163 | LCD | LCD-ENABLE | GPIO_B0_01 | LCD interface signal or multifunction GPIO with 3.3V logic levels. |
−
| 74||COM-GPIO||UART1-RTS||GPIO_AD_B0_15||"UART1 RTS input
+
| 164 | LCD | LCD-DATA2 | GND | Internally connected to GND. |
−
|-
+
| 165 | Power | GND | - | - |
−
| or multifunction GPIO with 3.3V logic levels."
+
| 166 | LCD | LCD-DATA7 | GPIO_B0_08 | LCD interface signal or multifunction GPIO with 3.3V logic levels. |
−
|-
+
| 167 | SDIO | SDIO1-D0 | GPIO_SD_B0_02 | SDIO interface signal or multifunction GPIO with 3.3V logic levels. |
−
| 75||NC||-||-||Not internally connected.
+
| 168 | NC | - | - | Not internally connected. |
−
|-
+
| 169 | SDIO | SDIO1-D3 | GPIO_SD_B0_05 | SDIO interface signal or multifunction GPIO with 3.3V logic levels. |
−
| 76||COM-GPIO||UART3-CTS||GPIO_AD_B1_04||"UART3 CTS output
+
| 170 | NC | - | - | Not internally connected. |
−
|-
+
| 171 | SDIO | SDIO1-D1 | GPIO_SD_B0_03 | SDIO interface signal or multifunction GPIO with 3.3V logic levels. |
−
| or multifunction GPIO with 3.3V logic levels."
+
| 172 | NC | - | - | Not internally connected. |
−
|-
+
| 173 | SDIO | SDIO1-CMD | GPIO_SD_B0_00 | SDIO interface signal or multifunction GPIO with 3.3V logic levels. |
−
| 77||NC||-||-||Not internally connected.
+
| 174 | NC | - | - | Not internally connected. |
−
|-
+
| 175 | SDIO | SDIO1-D2 | GPIO_SD_B0_04 | SDIO interface signal or multifunction GPIO with 3.3V logic levels. |
−
| 78||COM-GPIO||UART2-RTS||GPIO_AD_B1_01||"UART2 RTS input
+
| 176 | NC | - | - | Not internally connected. |
−
|-
+
| 177 | Power | GND | - | - |
−
| or multifunction GPIO with 3.3V logic levels."
+
| 178 | NC | - | - | Not internally connected. |
−
|-
+
| 179 | SDIO | SDIO1-CLK | GPIO_SD_B0_01 | SDIO interface signal or multifunction GPIO with 3.3V logic levels. |
−
| 79||COM-GPIO||UART5-TXD||GPIO_B1_12||"UART5 TxD output
+
| 180 | NC | - | - | Not internally connected. |
−
|-
+
| 181 | Power | GND | - | - |
−
| or multifunction GPIO with 3.3V logic levels."
+
| 182 | NC | - | - | Not internally connected. |
−
|-
+
| 183 | NC | - | - | Not internally connected. |
−
| 80||COM-GPIO||UART3-RTS||GPIO_AD_B1_05||"UART3 RTS input
+
| 184 | Power | GND | - | - |
−
|-
+
| 185 | Power | GND | - | - |
−
| or multifunction GPIO with 3.3V logic levels."
+
| 186 | NC | | - | Not internally connected. |
−
|-
+
| 187 | NC | | - | Not internally connected. |
−
| 81||Power||GND||-||-
+
| 188 | NC | - | - | Not internally connected. |
−
|-
+
| 189 | Power | GND | - | - |
−
| 82||Power||GND||-||-
+
| 190 | NC | - | - | Not internally connected. |
−
|-
+
| 191 | NC | - | - | Not internally connected. |
−
| 83||NC||-||-||Not internally connected.
+
| 192 | NC | - | - | Not internally connected. |
−
|-
+
| 193 | NC | - | - | Not internally connected. |
−
| 84||Power||GND||-||-
+
| 194 | NC | - | - | Not internally connected. |
−
|-
+
| 195 | NC | - | - | Not internally connected. |
−
| 85||Power||+3.3VOUT||-||+3.3V generated by SOM's LDO.
+
| 196 | NC | - | - | Not internally connected. |
−
|-
+
| 197 | NC | - | - | Not internally connected. |
−
| 86||NC||-||-||Not internally connected.
+
| 198 | NC | - | - | Not internally connected. |
−
|-
+
| 199 | Power | GND | - | - |
−
| 87||Power||+3.3VOUT||-||+3.3V generated by SOM's LDO.
+
| 200 | Power | GND | - | - |
−
|-
 
−
| 88||Power||+3.3VOUT||-||+3.3V generated by SOM's LDO.
 
−
|-
 
−
| 89||Power||+3.3VOUT||-||+3.3V generated by SOM's LDO.
 
−
|-
 
−
| 90||Power||+3.3VOUT||-||+3.3V generated by SOM's LDO.
 
−
|-
 
−
| 91||Power||+3.3VOUT||-||+3.3V generated by SOM's LDO.
 
−
|-
 
−
| 92||Power||+3.3VOUT||-||+3.3V generated by SOM's LDO.
 
−
|-
 
−
| 93||Power||+3.3VOUT||-||+3.3V generated by SOM's LDO.
 
−
|-
 
−
| 94||NC||-||-||Not internally connected.
 
−
|-
 
−
| 95||NC||-||-||Not internally connected.
 
−
|-
 
−
| 96||Power||+5VIN||-||+4.0-5.5V input power supply.
 
−
|-
 
−
| 97||Ethernet||ENET1-RXD0||GPIO_B1_04||Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 98||Power||+5VIN||-||+4.0-5.5V input power supply.
 
−
|-
 
−
| 99||Ethernet||ENET1-RXD1||GPIO_B1_05||Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 100||Power||+5VIN||-||+4.0-5.5V input power supply.
 
−
|-
 
−
| 101||Ethernet||ENET1-CRS-DV||GPIO_B1_06||Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 102||Power||+5VIN||||+4.0-5.5V input power supply.
 
−
|-
 
−
| 103||Power||GND||-||-
 
−
|-
 
−
| 104||Power||+5VIN||||+4.0-5.5V input power supply.
 
−
|-
 
−
| 105||NC||-||-||Not internally connected.
 
−
|-
 
−
| 106||Power||+5VIN||||+4.0-5.5V input power supply.
 
−
|-
 
−
| 107||Power||GND||-||-
 
−
|-
 
−
| 108||Power||+5VIN||||+4.0-5.5V input power supply.
 
−
|-
 
−
| 109||NC||-||-||Not internally connected.
 
−
|-
 
−
| 110||Power||+5VIN||-||+4.0-5.5V input power supply.
 
−
|-
 
−
| 111||Ethernet||ENET2-RXD0||GPIO_AD_B1_14||Ethernet MAC2-PHY interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 112||Power||+5VIN||-||+4.0-5.5V input power supply.
 
−
|-
 
−
| 113||NC||-||-||Not internally connected.
 
−
|-
 
−
| 114||Ethernet||ENET1-TXEN||GPIO_B1_09||Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 115||Power||GND||-||-
 
−
|-
 
−
| 116||Power||GND||-||-
 
−
|-
 
−
| 117||Ethernet||ENET2-CRS-DV||GPIO_AD_B1_15||Ethernet MAC2-PHY interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 118||Ethernet||ENET1-TX-CLK||GPIO_B1_10||"Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| In series is connected 10R resistor."
 
−
|-
 
−
| 119||Ethernet||ENET2-TXD1||GPIO_AD_B1_13||Ethernet MAC2-PHY interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 120||Power||GND||-||-
 
−
|-
 
−
| 121||Ethernet||ENET2-TXEN||GPIO_AD_B1_12||Ethernet MAC2-PHY interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 122||Ethernet||ENET1-TXD0||GPIO_B1_07||Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 123||Ethernet||ENET2-TXD0||GPIO_B1_15||Ethernet MAC2-PHY interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 124||Ethernet||ENET1-TXD1||GPIO_B1_08||Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 125||Power||GND||-||-
 
−
|-
 
−
| 126||Ethernet||ENET1-RXER||GPIO_B1_11||Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 127||Power||GND||-||-
 
−
|-
 
−
| 128||Power||GND||-||-
 
−
|-
 
−
| 129||LCD||LCD-DATA21||GPIO_B1_01||LCD interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 130||Power||GND||-||-
 
−
|-
 
−
| 131||LCD||LCD-DATA22||GPIO_B1_02||LCD interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 132||Power||GND||-||-
 
−
|-
 
−
| 133||LCD||LCD-DATA17||GND||Internally connected to GND.
 
−
|-
 
−
| 134||LCD||LCD-DATA23||GPIO_B1_03||LCD interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 135||Power||GND||-||-
 
−
|-
 
−
| 136||Power||GND||-||-
 
−
|-
 
−
| 137||LCD||LCD_DATA18||GND||Internally connected to GND.
 
−
|-
 
−
| 138||LCD||LCD-DATA19||GPIO_B0_15||LCD interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 139||LCD||LCD-DATA13||GPIO_B0_12||LCD interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 140||LCD||LCD-DATA20||GPIO_B1_00||LCD interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 141||LCD||LCD-DATA14||GPIO_B0_13||LCD interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 142||LCD||LCD-DATA15||GPIO_B0_14||LCD interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 143||LCD||LCD_DATA8||GND||Internally connected to GND.
 
−
|-
 
−
| 144||LCD||LCD-DATA16||GND||Internally connected to GND.
 
−
|-
 
−
| 145||LCD||LCD-DATA9||GND||Internally connected to GND.
 
−
|-
 
−
| 146||Power||GND||-||-
 
−
|-
 
−
| 147||Power||GND||-||-
 
−
|-
 
−
| 148||LCD||LCD-DATA11||GPIO_B0_10||LCD interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 149||LCD||LCD-DATA5||GPIO_B0_06||LCD interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 150||LCD||LCD-DATA12||GPIO_B0_11||LCD interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 151||LCD||LCD-DATA6||GPIO_B0_07||LCD interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 152||LCD||LCD-DATA10||GPIO_B0_09||LCD interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 153||LCD||LCD-DATA0||GND||Internally connected to GND.
 
−
|-
 
−
| 154||LCD||LCD-DATA3||GPIO_B0_04||LCD interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 155||LCD||LCD-DATA1||GND||Internally connected to GND.
 
−
|-
 
−
| 156||Power||GND||-||-
 
−
|-
 
−
| 157||LCD||LCD-RESET||GPIO_AD_B1_08||LCD interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 158||LCD||LCD-DATA4||GPIO_B0_05||LCD interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 159||Power||GND||-||-
 
−
|-
 
−
| 160||LCD||LCD-HSYNC||GPIO_B0_02||LCD interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 161||LCD||LCD-CLK||GPIO_B0_00||LCD interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 162||LCD||LCD-VSYNC||GPIO_B0_03||LCD interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 163||LCD||LCD-ENABLE||GPIO_B0_01||LCD interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 164||LCD||LCD-DATA2||GND||Internally connected to GND.
 
−
|-
 
−
| 165||Power||GND||-||-
 
−
|-
 
−
| 166||LCD||LCD-DATA7||GPIO_B0_08||LCD interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 167||SDIO||SDIO1-D0||GPIO_SD_B0_02||SDIO interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 168||NC||-||-||Not internally connected.
 
−
|-
 
−
| 169||SDIO||SDIO1-D3||GPIO_SD_B0_05||SDIO interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 170||NC||-||-||Not internally connected.
 
−
|-
 
−
| 171||SDIO||SDIO1-D1||GPIO_SD_B0_03||SDIO interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 172||NC||-||-||Not internally connected.
 
−
|-
 
−
| 173||SDIO||SDIO1-CMD||GPIO_SD_B0_00||SDIO interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 174||NC||-||-||Not internally connected.
 
−
|-
 
−
| 175||SDIO||SDIO1-D2||GPIO_SD_B0_04||SDIO interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 176||NC||-||-||Not internally connected.
 
−
|-
 
−
| 177||Power||GND||-||-
 
−
|-
 
−
| 178||NC||-||-||Not internally connected.
 
−
|-
 
−
| 179||SDIO||SDIO1-CLK||GPIO_SD_B0_01||SDIO interface signal or multifunction GPIO with 3.3V logic levels.
 
−
|-
 
−
| 180||NC||-||-||Not internally connected.
 
−
|-
 
−
| 181||Power||GND||-||-
 
−
|-
 
−
| 182||NC||-||-||Not internally connected.
 
−
|-
 
−
| 183||NC||-||-||Not internally connected.
 
−
|-
 
−
| 184||Power||GND||-||-
 
−
|-
 
−
| 185||Power||GND||-||-
 
−
|-
 
−
| 186||NC||||-||Not internally connected.
 
−
|-
 
−
| 187||NC||||-||Not internally connected.
 
−
|-
 
−
| 188||NC||-||-||Not internally connected.
 
−
|-
 
−
| 189||Power||GND||-||-
 
−
|-
 
−
| 190||NC||-||-||Not internally connected.
 
−
|-
 
−
| 191||NC||-||-||Not internally connected.
 
−
|-
 
−
| 192||NC||-||-||Not internally connected.
 
−
|-
 
−
| 193||NC||-||-||Not internally connected.
 
−
|-
 
−
| 194||NC||-||-||Not internally connected.
 
−
|-
 
−
| 195||NC||-||-||Not internally connected.
 
−
|-
 
−
| 196||NC||-||-||Not internally connected.
 
−
|-
 
−
| 197||NC||-||-||Not internally connected.
 
−
|-
 
−
| 198||NC||-||-||Not internally connected.
 
−
|-
 
−
| 199||Power||GND||-||-
 
−
|-
 
−
| 200||Power||GND||-||-
 
−
|-
 
−
|
 
−
|}
 
  
 
== Dimensions ==
 
== Dimensions ==
 
[[File:VisionSOM-RT Dimensions.png|600px|center]]
 
[[File:VisionSOM-RT Dimensions.png|600px|center]]

Revision as of 14:00, 14 February 2019

VisionSOM-RT Datasheet and Pinout

General description

VisionSOM-RT-v 1 1.png

The VisionSOM-RT family is a SODIMM-sized SoM based on the NXP i.MX RT application processor which features an advanced implementation of a single ARM Cortex-M7 core (at speeds up to 600MHz).

The VisionSOM-RT is a low power highly integrated SoM (System-on-Module) featuring high computation performance, real-time functionality and MCU usability. High security enabled by AES-128, HAB and On-the-fly QSPI Flash Decryption together with 2D graphical acceleration make an ideally suited solution for home and industrial control systems, wireless application, communication solutions and real-time systems.

The system supports industrial grade targeting embedded application.

SOMLabs also provides a complete hardware and software development board for the SoM in the form of a carrier board and optional TFT display and touch panel.

Applications

  • Industrial embedded Linux computer
  • Home Appliances
  • Home Automation – Smart Home
  • Human-machine Interfaces (HMI)
  • Point-of-sales (POS) terminals
  • Cash Register
  • 2D barcode scanners and printers
  • Smart grid Infrastructure
  • IoT gateways
  • Residential getaways
  • Machine vision equipment
  • Robotics
  • Fitness/outdoor equipment

Features

  • Powered by NXP i.MX RT application processor
  • Core clock up to 600MHz
  • 512kB on-chip RAM memory
  • 256Mb (32MB) SDRAM memory
  • 128Mb (16MB) QuadSPI Flash memory
  • Power-efficient and cost-optimized solution
  • Ideal for industrial IoT and embedded applications
  • FreeRTOS support

Pictures of SOM versions

Version Photo
RAM&QSPI
VisionSOM-RT-ram-top-bottom.png
QSPI
VisionSOM-RT-QSPI-top-bottom.png

Ordering info

SLSN2CpuType_Clock_RamSize_FlashSize_SF_TEMP_V
SLSProduct type
SLS - System on Module
NSOM Name
1 - VisionSOM SODIMM200
2CPU Family
2 - i.MX RT
CpuTypeCPU Type
RT52 - i.MX RT 1052
RT62 - i.MX RT 1062
ClockCPU Clock Speed
528C - 528MHz
RamSizeRAM Size
0R - No RAM
32R - 32MB
FlashSizeFlash Size Type and Density
4QSPI - 4MB QSPI Flash
16QSPI - 16MB QSPI Flash
SFSpecial Features
0SF - No Special Features
TEMPOperating Temperature
C - Consumer: 0 to +70 C
I - Industrial: -40 to +85 C
VSOM Version
A - Version 1.2

Block Diagram

VisionSOM-RT-block diagram.jpg

Operating ranges

Parameter Value Unit Comment
Power Supply
5.0
V
 Connected to +5VIN SODIMM pin
Input GPIO voltage
3.3
V
 -
Environment temperature1
-40…+85
 oC Industrial range
0…+70
 Consumer range

Note:
1. Maximum MPU junction temperature is +105oC (industrial version) or +95oC (consumer version).

Electrical parameters

SOM
signal name 		Parameter Value Units
Min. Typ. Max.
+5VIN Supply Voltage 4.0 5.0 5.5 V
- Total Supply Current1 x x x A
VGPIO GPIO Input Voltage 0 3.3 3.62 V
+3.3VOUT SOM Internal LDO
Output Current 		- - 0.5 A
USB-OTGx-VBUS USB Supply 4.40 - 5.5 V
VDD-COIN-3V SNVS Backup
Battery Supply 		2.66 - 3.6 V
- ADC Inputs Voltage 0 - 3.3 V

Notes:
1. Excluding external load connected to +3.3VOUT lines.
2. Applying the maximum voltage 3.6V results in shorten lifetime. Recommended value is smaller than 3.5V.


Pinout

^ SODIMM pin ^ "Functional ^ | domain" | "Function | | name" | "i.MX-RT | | Pad Name" | "Description | | (refer to i.MX-RT manuals for details)" | | 1 | Power | GND | - | - | | 2 | Power | GND | - | - | | 3 | Ctrl | PMIC-STBY-REQ | CCM_PMIC_STBY_REQ | Output 

leave open if not used. |

| 4 | Ctrl | POR-B | - | External warm reset input 

active L. |

| 5 | Ctrl | PMIC-ON-REQ | SNVS_PMIC_ON_REQ | Output 

leave open if not used. |

| 6 | Power | VDD-SNVS-3V3 | VDD_SNVS_IN | "SNVS backup power supply must be held between 2.9V and 3.3V if the system requires keeping real time and other data on OFF state. | | Internally connected to +3.3V 

leave open." |

| 7 | BOOT | BOOT-MODE1 | GPIO_AD_B0_05 | BOOT1 configuration line or multifunction GPIO with 3.3V logic levels. | | 8 | Power | VDD-COIN-3V | VDD_SNVS_IN | "Optional external coin battery for SNVS power domain 

must be held between 2.9V and 3.3V if the system requires keeping real time and other data on OFF state. |

| Leave open if not used." | | 9 | BOOT | BOOT-MODE0 | GPIO_AD_B0_04 | "BOOT1 configuration line or multifunction GPIO with 3.3V logic levels. | | Pin shared with GPIO-4 line." | | 10 | NC | - | - | Not internally connected. | | 11 | USB | USB-OTG2-VBUS | USB_OTG2_VBUS | +5V USB bus. Leave open if not used. | | 12 | NC | - | - | Not internally connected. | | 13 | USB | USB-OTG1-VBUS | USB_OTG1_VBUS | +5V USB bus. Leave open if not used. | | 14 | Ctrl | ONOFF | ONOFF | Input for power interrupt generation. Leave open if not used. | | 15 | Power | GND | - | - | | 16 | Ctrl | POR-B | POR_B | "Cold reset negative logic input resets all modules and logic in the IC. | | May be used in addition to internally generated power on reset signal (logical AND 

both internal |

| and external signals are considered active low)." | | 17 | Power | GND | - | - | | 18 | NC | - | - | Not internally connected. | | 19 | USB | USB-OTG2-DP | USB_OTG2_DP | Leave open if not used. | | 20 | Power | GND | - | - | | 21 | USB | USB-OTG2-DN | USB_OTG2_DN | Leave open if not used. | | 22 | Power | GND | - | - | | 23 | Power | GND | - | - | | 24 | NC | - | - | Not internally connected. | | 25 | USB | USB-OTG1-DP | USB_OTG1_DP | Leave open if not used. | | 26 | Power | GND | - | - | | 27 | USB | USB-OTG1-DN | USB_OTG1_DN | Leave open if not used. | | 28 | Power | GND | - | - | | 29 | Power | GND | - | - | | 30 | NC | - | - | Not internally connected. | | 31 | USB | nUSB-OTG-CHD | USB_OTG1_CHD_B | Leave open if not used. | | 32 | - | - | - | Not internally connected. | | 33 | JTAG | JTAG-MOD | GPIO_AD_B0_08 | "JTAG mode selector. | | multifunction GPIO with 3.3V levels. | | Leave open if not used (bulit-in 4.7k pull-down resistor)." | | 34 | - | - | - | Not internally connected. | | 35 | Power | GND | - | - | | 36 | - | - | - | Not internally connected. | | 37 |   | CLK1-N | CCM_CLK1_N | "General purpose differential high speed clock input/output. | | Leave open if not used." | | 38 | Power | GND | - | - | | 39 | | CLK1-P | CCM_CLK1_P | "General purpose differential high speed clock input/output. | | Leave open if not used." | | 40 | Power | GND | - | - | | 41 | Power | GND | - | - | | 42 | NC | - | - | Not internally connected. | | 43 | JTAG | JTAG-TDI | GPIO_AD_B0_09 | "JTAG TDI input line. | | Multifunction GPIO with 3.3V logic levels." | | 44 | NC | - | - | Not internally connected. | | 45 | GPIO | GPIO-B1-09 | GPIO_AD_B1_09 | Multifunction GPIO with 3.3V logic levels. | | 46 | JTAG | JTAG-TMS | GPIO_AD_B0_06 | "JTAG TMS input line. | | Multifunction GPIO with 3.3V logic levels." | | 47 | GPIO | GPIO-4 | GPIO_AD_B0_04 | "Multifunction GPIO with 3.3V logic levels. | | Pin shared with BOOT-MODE0 line." | | 48 | JTAG | JTAG-nTRST | GPIO_AD_B0_11 | "JTAG nTRST input line. | | Multifunction GPIO with 3.3V logic levels." | | 49 | GPIO | GPIO-B1-11 | GPIO_AD_B1_11 | Multifunction GPIO with 3.3V logic levels. | | 50 | Power | GND | - | - | | 51 | Power | GND | - | - | | 52 | JTAG | JTAG-TDO | GPIO_AD_B0_10 | "JTAG TDO ouput line. | | Multifunction GPIO with 3.3V logic levels." | | 53 | GPIO | ENET-MDC | GPIO_EMC_40 | Multifunction GPIO with 3.3V logic levels. | | 54 | JTAG | JTAG-TCK | GPIO_AD_B0_07 | "JTAG TCK input line. | | Multifunction GPIO with 3.3V logic levels." | | 55 | GPIO | GPIO-3 | GPIO_AD_B0_03 | Multifunction GPIO with 3.3V logic levels. | | 56 | GPIO | GPIO-B1-14 | GPIO_AD_B1_14 | Multifunction GPIO with 3.3V logic levels. | | 57 | COM-GPIO | UART1-TXD | GPIO_AD_B0_12 | "UART1 TxD output | | or multifunction GPIO with 3.3V logic levels." | | 58 | GPIO | GPIO-2 | GPIO_AD_B0_02 | Multifunction GPIO with 3.3V logic levels. | | 59 | Power | GND | - | - | | 60 | Power | GND | - | - | | 61 | GPIO | ENET-MDIO | GPIO_EMC_41 | Multifunction GPIO with 3.3V logic levels. | | 62 | GPIO | GPIO-1 | GPIO_AD_B0_01 | Multifunction GPIO with 3.3V logic levels. | | 63 | COM-GPIO | UART1-RXD | GPIO_AD_B0_13 | "UART1 RxD input | | or multifunction GPIO with 3.3V logic levels." | | 64 | GPIO | GPIO-0 | GPIO_AD_B0_00 | Multifunction GPIO with 3.3V logic levels. | | 65 | COM-GPIO | UART2-TXD | GPIO_AD_B1_02 | "UART2 TxD output | | or multifunction GPIO with 3.3V logic levels." | | 66 | COM-GPIO | UART1-CTS | GPIO_AD_B0_14 | "UART1 CTS output | | or multifunction GPIO with 3.3V logic levels." | | 67 | COM-GPIO | UART2-RXD | GPIO_AD_B1_03 | "UART2 RxD input | | or multifunction GPIO with 3.3V logic levels." | | 68 | COM-GPIO | UART5-RXD | GPIO_B1_13 | "UART5 RxD input | | or multifunction GPIO with 3.3V logic levels." | | 69 | COM-GPIO | UART3-TXD | GPIO_AD_B1_06 | "UART3 TxD input | | or multifunction GPIO with 3.3V logic levels." | | 70 | Power | GND | - | - | | 71 | Power | GND | - | - | | 72 | COM-GPIO | UART2-CTS | GPIO_AD_B1_00 | "UART2 CTS output | | or multifunction GPIO with 3.3V logic levels." | | 73 | COM-GPIO | UART3-RXD | GPIO_AD_B1_07 | "UART3 RxD input | | or multifunction GPIO with 3.3V logic levels." | | 74 | COM-GPIO | UART1-RTS | GPIO_AD_B0_15 | "UART1 RTS input | | or multifunction GPIO with 3.3V logic levels." | | 75 | NC | - | - | Not internally connected. | | 76 | COM-GPIO | UART3-CTS | GPIO_AD_B1_04 | "UART3 CTS output | | or multifunction GPIO with 3.3V logic levels." | | 77 | NC | - | - | Not internally connected. | | 78 | COM-GPIO | UART2-RTS | GPIO_AD_B1_01 | "UART2 RTS input | | or multifunction GPIO with 3.3V logic levels." | | 79 | COM-GPIO | UART5-TXD | GPIO_B1_12 | "UART5 TxD output | | or multifunction GPIO with 3.3V logic levels." | | 80 | COM-GPIO | UART3-RTS | GPIO_AD_B1_05 | "UART3 RTS input | | or multifunction GPIO with 3.3V logic levels." | | 81 | Power | GND | - | - | | 82 | Power | GND | - | - | | 83 | NC | - | - | Not internally connected. | | 84 | Power | GND | - | - | | 85 | Power | +3.3VOUT | - | +3.3V generated by SOM's LDO. | | 86 | NC | - | - | Not internally connected. | | 87 | Power | +3.3VOUT | - | +3.3V generated by SOM's LDO. | | 88 | Power | +3.3VOUT | - | +3.3V generated by SOM's LDO. | | 89 | Power | +3.3VOUT | - | +3.3V generated by SOM's LDO. | | 90 | Power | +3.3VOUT | - | +3.3V generated by SOM's LDO. | | 91 | Power | +3.3VOUT | - | +3.3V generated by SOM's LDO. | | 92 | Power | +3.3VOUT | - | +3.3V generated by SOM's LDO. | | 93 | Power | +3.3VOUT | - | +3.3V generated by SOM's LDO. | | 94 | NC | - | - | Not internally connected. | | 95 | NC | - | - | Not internally connected. | | 96 | Power | +5VIN | - | +4.0-5.5V input power supply. | | 97 | Ethernet | ENET1-RXD0 | GPIO_B1_04 | Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels. | | 98 | Power | +5VIN | - | +4.0-5.5V input power supply. | | 99 | Ethernet | ENET1-RXD1 | GPIO_B1_05 | Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels. | | 100 | Power | +5VIN | - | +4.0-5.5V input power supply. | | 101 | Ethernet | ENET1-CRS-DV | GPIO_B1_06 | Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels. | | 102 | Power | +5VIN | | +4.0-5.5V input power supply. | | 103 | Power | GND | - | - | | 104 | Power | +5VIN | | +4.0-5.5V input power supply. | | 105 | NC | - | - | Not internally connected. | | 106 | Power | +5VIN | | +4.0-5.5V input power supply. | | 107 | Power | GND | - | - | | 108 | Power | +5VIN | | +4.0-5.5V input power supply. | | 109 | NC | - | - | Not internally connected. | | 110 | Power | +5VIN | - | +4.0-5.5V input power supply. | | 111 | Ethernet | ENET2-RXD0 | GPIO_AD_B1_14 | Ethernet MAC2-PHY interface signal or multifunction GPIO with 3.3V logic levels. | | 112 | Power | +5VIN | - | +4.0-5.5V input power supply. | | 113 | NC | - | - | Not internally connected. | | 114 | Ethernet | ENET1-TXEN | GPIO_B1_09 | Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels. | | 115 | Power | GND | - | - | | 116 | Power | GND | - | - | | 117 | Ethernet | ENET2-CRS-DV | GPIO_AD_B1_15 | Ethernet MAC2-PHY interface signal or multifunction GPIO with 3.3V logic levels. | | 118 | Ethernet | ENET1-TX-CLK | GPIO_B1_10 | "Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels. | | In series is connected 10R resistor." | | 119 | Ethernet | ENET2-TXD1 | GPIO_AD_B1_13 | Ethernet MAC2-PHY interface signal or multifunction GPIO with 3.3V logic levels. | | 120 | Power | GND | - | - | | 121 | Ethernet | ENET2-TXEN | GPIO_AD_B1_12 | Ethernet MAC2-PHY interface signal or multifunction GPIO with 3.3V logic levels. | | 122 | Ethernet | ENET1-TXD0 | GPIO_B1_07 | Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels. | | 123 | Ethernet | ENET2-TXD0 | GPIO_B1_15 | Ethernet MAC2-PHY interface signal or multifunction GPIO with 3.3V logic levels. | | 124 | Ethernet | ENET1-TXD1 | GPIO_B1_08 | Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels. | | 125 | Power | GND | - | - | | 126 | Ethernet | ENET1-RXER | GPIO_B1_11 | Ethernet MAC1-PHY interface signal or multifunction GPIO with 3.3V logic levels. | | 127 | Power | GND | - | - | | 128 | Power | GND | - | - | | 129 | LCD | LCD-DATA21 | GPIO_B1_01 | LCD interface signal or multifunction GPIO with 3.3V logic levels. | | 130 | Power | GND | - | - | | 131 | LCD | LCD-DATA22 | GPIO_B1_02 | LCD interface signal or multifunction GPIO with 3.3V logic levels. | | 132 | Power | GND | - | - | | 133 | LCD | LCD-DATA17 | GND | Internally connected to GND. | | 134 | LCD | LCD-DATA23 | GPIO_B1_03 | LCD interface signal or multifunction GPIO with 3.3V logic levels. | | 135 | Power | GND | - | - | | 136 | Power | GND | - | - | | 137 | LCD | LCD_DATA18 | GND | Internally connected to GND. | | 138 | LCD | LCD-DATA19 | GPIO_B0_15 | LCD interface signal or multifunction GPIO with 3.3V logic levels. | | 139 | LCD | LCD-DATA13 | GPIO_B0_12 | LCD interface signal or multifunction GPIO with 3.3V logic levels. | | 140 | LCD | LCD-DATA20 | GPIO_B1_00 | LCD interface signal or multifunction GPIO with 3.3V logic levels. | | 141 | LCD | LCD-DATA14 | GPIO_B0_13 | LCD interface signal or multifunction GPIO with 3.3V logic levels. | | 142 | LCD | LCD-DATA15 | GPIO_B0_14 | LCD interface signal or multifunction GPIO with 3.3V logic levels. | | 143 | LCD | LCD_DATA8 | GND | Internally connected to GND. | | 144 | LCD | LCD-DATA16 | GND | Internally connected to GND. | | 145 | LCD | LCD-DATA9 | GND | Internally connected to GND. | | 146 | Power | GND | - | - | | 147 | Power | GND | - | - | | 148 | LCD | LCD-DATA11 | GPIO_B0_10 | LCD interface signal or multifunction GPIO with 3.3V logic levels. | | 149 | LCD | LCD-DATA5 | GPIO_B0_06 | LCD interface signal or multifunction GPIO with 3.3V logic levels. | | 150 | LCD | LCD-DATA12 | GPIO_B0_11 | LCD interface signal or multifunction GPIO with 3.3V logic levels. | | 151 | LCD | LCD-DATA6 | GPIO_B0_07 | LCD interface signal or multifunction GPIO with 3.3V logic levels. | | 152 | LCD | LCD-DATA10 | GPIO_B0_09 | LCD interface signal or multifunction GPIO with 3.3V logic levels. | | 153 | LCD | LCD-DATA0 | GND | Internally connected to GND. | | 154 | LCD | LCD-DATA3 | GPIO_B0_04 | LCD interface signal or multifunction GPIO with 3.3V logic levels. | | 155 | LCD | LCD-DATA1 | GND | Internally connected to GND. | | 156 | Power | GND | - | - | | 157 | LCD | LCD-RESET | GPIO_AD_B1_08 | LCD interface signal or multifunction GPIO with 3.3V logic levels. | | 158 | LCD | LCD-DATA4 | GPIO_B0_05 | LCD interface signal or multifunction GPIO with 3.3V logic levels. | | 159 | Power | GND | - | - | | 160 | LCD | LCD-HSYNC | GPIO_B0_02 | LCD interface signal or multifunction GPIO with 3.3V logic levels. | | 161 | LCD | LCD-CLK | GPIO_B0_00 | LCD interface signal or multifunction GPIO with 3.3V logic levels. | | 162 | LCD | LCD-VSYNC | GPIO_B0_03 | LCD interface signal or multifunction GPIO with 3.3V logic levels. | | 163 | LCD | LCD-ENABLE | GPIO_B0_01 | LCD interface signal or multifunction GPIO with 3.3V logic levels. | | 164 | LCD | LCD-DATA2 | GND | Internally connected to GND. | | 165 | Power | GND | - | - | | 166 | LCD | LCD-DATA7 | GPIO_B0_08 | LCD interface signal or multifunction GPIO with 3.3V logic levels. | | 167 | SDIO | SDIO1-D0 | GPIO_SD_B0_02 | SDIO interface signal or multifunction GPIO with 3.3V logic levels. | | 168 | NC | - | - | Not internally connected. | | 169 | SDIO | SDIO1-D3 | GPIO_SD_B0_05 | SDIO interface signal or multifunction GPIO with 3.3V logic levels. | | 170 | NC | - | - | Not internally connected. | | 171 | SDIO | SDIO1-D1 | GPIO_SD_B0_03 | SDIO interface signal or multifunction GPIO with 3.3V logic levels. | | 172 | NC | - | - | Not internally connected. | | 173 | SDIO | SDIO1-CMD | GPIO_SD_B0_00 | SDIO interface signal or multifunction GPIO with 3.3V logic levels. | | 174 | NC | - | - | Not internally connected. | | 175 | SDIO | SDIO1-D2 | GPIO_SD_B0_04 | SDIO interface signal or multifunction GPIO with 3.3V logic levels. | | 176 | NC | - | - | Not internally connected. | | 177 | Power | GND | - | - | | 178 | NC | - | - | Not internally connected. | | 179 | SDIO | SDIO1-CLK | GPIO_SD_B0_01 | SDIO interface signal or multifunction GPIO with 3.3V logic levels. | | 180 | NC | - | - | Not internally connected. | | 181 | Power | GND | - | - | | 182 | NC | - | - | Not internally connected. | | 183 | NC | - | - | Not internally connected. | | 184 | Power | GND | - | - | | 185 | Power | GND | - | - | | 186 | NC | | - | Not internally connected. | | 187 | NC | | - | Not internally connected. | | 188 | NC | - | - | Not internally connected. | | 189 | Power | GND | - | - | | 190 | NC | - | - | Not internally connected. | | 191 | NC | - | - | Not internally connected. | | 192 | NC | - | - | Not internally connected. | | 193 | NC | - | - | Not internally connected. | | 194 | NC | - | - | Not internally connected. | | 195 | NC | - | - | Not internally connected. | | 196 | NC | - | - | Not internally connected. | | 197 | NC | - | - | Not internally connected. | | 198 | NC | - | - | Not internally connected. | | 199 | Power | GND | - | - | | 200 | Power | GND | - | - |

Dimensions

VisionSOM-RT Dimensions.png
Retrieved from "https://wiki.somlabs.com/index.php?title=VisionSOM-RT_Datasheet_and_Pinout&oldid=1263"
NXP Partner ST Partner Renesas Partner