Personal tools

Difference between revisions of "VisionSOM-V2L Datasheet and Pinout"

From SomLabs Wiki

Jump to: navigation, search
(→‎Features)
(→‎SoM pinout)
 
(33 intermediate revisions by the same user not shown)
Line 28: Line 28:
  
 
== Features ==
 
== Features ==
−
*Powered by dual core Renesas RZ/V2L application processor
+
*Powered by dual core Renesas RZ/V2L application processor (R9A07G054L27GBG)
 
*Dual ARM Cortex-A55 core at speed up to 1.2GHz
 
*Dual ARM Cortex-A55 core at speed up to 1.2GHz
−
*ARM Cortex-M3 core at speed up to 200MHz
+
*ARM Cortex-M33 core at speed up to 200MHz
 
*Integrated Machine-Learning (ML) and Artificial Intelligence (AI) AI Accelerator (DRP-AI)
 
*Integrated Machine-Learning (ML) and Artificial Intelligence (AI) AI Accelerator (DRP-AI)
 +
*Integrated 3D GPU (ARM Mali-G31 @500MHz)
 
*1GB RAM (DDR4)
 
*1GB RAM (DDR4)
 
*Up to 32GB eMMC memory
 
*Up to 32GB eMMC memory
 
*Optional Murata radio module 2.4GHz Wi-Fi and Bluetooth v5.1
 
*Optional Murata radio module 2.4GHz Wi-Fi and Bluetooth v5.1
 
*Built-in dual USB 2.0 interface
 
*Built-in dual USB 2.0 interface
 +
*Built-in 2xCAN-FD interfaces
 
*Built-in MIPI-DSI display interface
 
*Built-in MIPI-DSI display interface
 +
*Built-in MIPI-CSI camera interface
 
*Power-efficient and cost-optimized solution
 
*Power-efficient and cost-optimized solution
 
*Ideal for industrial IoT and embedded applications
 
*Ideal for industrial IoT and embedded applications
Line 47: Line 50:
 
|-
 
|-
 
| eMMC ||  
 
| eMMC ||  
−
[[File:SpaceSOM-8Mplus-eMMC-top.jpg|center|thumb]]
+
[[File:VisionSOM-x2L-eMMC-top.png|center|thumb]]
−
[[File:SpaceSOM-8Mplus-eMMC-bottom.jpg|center|thumb]]
+
[[File:VisionSOM-x2L-eMMC-bottom.png|center|thumb]]
 
|-
 
|-
 
|}
 
|}
Line 54: Line 57:
 
{| class="frame-green"
 
{| class="frame-green"
 
|-
 
|-
−
| WiFi/BT module is available for all memory variants configurations.
+
| WiFi/BT module is available for all memory configurations.
 
|}
 
|}
  
Line 74: Line 77:
 
       "name" : "SOM Name",
 
       "name" : "SOM Name",
 
       "type" : "selector",
 
       "type" : "selector",
−
       "symbol" : "3",
+
       "symbol" : "2",
 
       "values" : [
 
       "values" : [
−
                     {"value" : "3",
+
                     {"value" : "2",
−
                     "description" : "High Performance SpaceSOM SODIM260 module"}
+
                     "description" : "High Performance VisionSOM SODIM200 module"}
 
                 ]
 
                 ]
 
     },
 
     },
Line 83: Line 86:
 
       "name" : "CPU Family",
 
       "name" : "CPU Family",
 
       "type" : "selector",
 
       "type" : "selector",
−
       "symbol" : "5",
+
       "symbol" : "2",
 
       "values" : [
 
       "values" : [
−
                     {"value" : "5",
+
                     {"value" : "2",
−
                     "description" : "i.MX 8M plus"}
+
                     "description" : "Renesas RZ/V2L family"}
 
                 ]
 
                 ]
 
     },
 
     },
Line 94: Line 97:
 
       "symbol" : "CpuType",
 
       "symbol" : "CpuType",
 
       "values" : [
 
       "values" : [
−
                     {"value" : "X8MPQC", "description" : "i.MX 8M plus Quad Core"}
+
                     {"value" : "RV2LDC", "description" : "RZ/V2L dual Cortex-A55 + Cortex-M33 + DRP-AI"}
 
                 ]
 
                 ]
 
     },
 
     },
Line 106: Line 109:
 
       "symbol" : "Clock",
 
       "symbol" : "Clock",
 
       "values" : [
 
       "values" : [
−
                     {"value" : "1600C", "description" : "1.6GHz (Industrial temperature range)"},
+
                     {"value" : "1200C", "description" : "1.2GHz"}
−
                    {"value" : "1800C", "description" : "1.8GHz (Commercial temperature range)"}
 
 
                 ]
 
                 ]
 
     },
 
     },
Line 115: Line 117:
 
     },
 
     },
 
     {
 
     {
−
       "name" : "LPDDR4 RAM Size",
+
       "name" : "DDR4 RAM Size",
 
       "type" : "selector",
 
       "type" : "selector",
 
       "symbol" : "RamSize",
 
       "symbol" : "RamSize",
 
       "values" : [
 
       "values" : [
−
                     {"value" : "01GR", "description" : "1GB (1024MB)"},
+
                     {"value" : "01GR", "description" : "1GB (1024MB)"}
−
                    {"value" : "02GR", "description" : "2GB (2048MB)"},
 
−
                    {"value" : "04GR", "description" : "4GB (4096MB)"}
 
 
                 ]
 
                 ]
 
     },
 
     },
Line 149: Line 149:
 
       "values" : [
 
       "values" : [
 
                     {"value" : "0SF", "description" : "No Special Features"},
 
                     {"value" : "0SF", "description" : "No Special Features"},
−
                     {"value" : "1WB", "description" : "Built-in dual-band Wi-Fi and Bluetooth v5.1"}
+
                     {"value" : "1WB", "description" : "Built-in 2.4GHz Wi-Fi and Bluetooth v5.1"}
 
                 ]
 
                 ]
 
     },
 
     },
Line 161: Line 161:
 
       "symbol" : "TEMP",
 
       "symbol" : "TEMP",
 
       "values" : [
 
       "values" : [
−
                    {"value" : "C", "description" : "Consumer: 0 to +70 C "},
 
 
                     {"value" : "E", "description" : "Extended: -25 to +70 C"},
 
                     {"value" : "E", "description" : "Extended: -25 to +70 C"},
 
                     {"value" : "I", "description" : "Industrial: -40 to +85 C"}
 
                     {"value" : "I", "description" : "Industrial: -40 to +85 C"}
Line 171: Line 170:
  
 
== Block Diagram ==
 
== Block Diagram ==
−
[[File:SpaceSOM-8Mplus-blokowy.png|250px|center]]
+
[[File:VisionSOM-V2L-blokowy.png|250px|center]]
  
 
== Operating ranges ==
 
== Operating ranges ==
Line 183: Line 182:
 
| <center>5.0</center>
 
| <center>5.0</center>
 
| <center>V</center>
 
| <center>V</center>
−
| Connected to VDD 5V SODIM260 pins
+
| Connected to VDD-5V0 SODIM200 pins
 
|-
 
|-
 
| Max. input GPIO voltage
 
| Max. input GPIO voltage
−
| <center>1.8/3.3</center>
+
| <center>3.3</center>
 
| <center>V</center>
 
| <center>V</center>
−
| -
+
| In 3.3V power domain
 +
|-
 +
| Max. input GPIO voltage
 +
| <center>1.8</center>
 +
| <center>V</center>
 +
| In 1.8V power domain
 
|-
 
|-
−
| rowspan="3" | Environment temperature<sup>1</sup>
+
| rowspan="3" | Environment temperature
 
| <center>-40…+85</center>
 
| <center>-40…+85</center>
 
| rowspan="3" | <sup>o</sup>C
 
| rowspan="3" | <sup>o</sup>C
 
| Industrial range w/o WiFi module
 
| Industrial range w/o WiFi module
 
|-
 
|-
−
| <center>-30…+85</center>
+
| <center>-25…+70</center>
 
| Industrial range with WiFi module
 
| Industrial range with WiFi module
 
|-
 
|-
Line 201: Line 205:
 
| Consumer range
 
| Consumer range
 
|}
 
|}
−
Note: <br />
 
−
1. Maximum MPU junction temperature is +105<sup>o</sup>C.<br />
 
−
2. Junction temperature determines MPU lifetime. Details: NXP AN13214 Application Note.
 
  
 
== Electrical parameters ==
 
== Electrical parameters ==
Line 216: Line 217:
 
| Max.
 
| Max.
 
|-
 
|-
−
| VDD-5V || Supply Voltage (Input) || 4.0 || 5.0 || 5.25 || V
+
| VDD-5V || Supply Voltage (Input) || 4.0 || 5.0 || 5.5 || V
 
|-
 
|-
−
| SD1-NVCC || Output power supply for external 1.8/3.3V accesories || - || - || 0.08 || A
+
| VDD-1V8 || Output power supply for external 1.8V accesories || - || - || 0.3<sup>1</sup> || A
 
|-
 
|-
−
| VDD-1V8 || Output power supply for external 1.8V accesories || - || - || 0.4 || A
+
| VDD-3V3 || Output power supply for external 3.3V accesories || - || - || 0.3<sup>2</sup> || A
−
|-
 
−
| VDD-3V3 || Output power supply for external 3.3V accesories || - || - || 0.3<sup>1</sup> || A
 
 
|-
 
|-
 
| VGPIO @1V8 || GPIO Input Voltage || 0 || - || 2.05 || V
 
| VGPIO @1V8 || GPIO Input Voltage || 0 || - || 2.05 || V
Line 228: Line 227:
 
| VGPIO @3V3 || GPIO Input Voltage || 0 || - || 3.6<sup>2</sup> || V
 
| VGPIO @3V3 || GPIO Input Voltage || 0 || - || 3.6<sup>2</sup> || V
 
|-
 
|-
−
| V<sub>USB_VBUS</sub> || USB VBUS Input Voltage || 0 || - || 3.95<sup>3</sup> || V
+
| V<sub>USB0-VBUS</sub> || USB VBUS Input Voltage || 0 || - || 5.25<sup>3</sup> || V
 +
|-
 +
| V<sub>ETH0</sub> || I/O voltage for Ethernet 0 || 0 || - || 1.8 || V
 +
|-
 +
| V<sub>ETH1</sub> || I/O voltage for Ethernet 1 || 0 || - || 1.8 or 3.3<sup>4</sup> || V
 +
|-
 +
| V<sub>JTAG</sub> || I/O voltage for Ethernet 1 || 0 || - || 1.8<sup>5</sup> || V
 +
|-
 +
| V<sub>ADC-IN</sub> || Input voltage for ADC-CHx<sup>6</sup> || 0 || - || 1.8 || V
 
|}
 
|}
 
Notes:<br />
 
Notes:<br />
 +
1. Total current on both VDD-1V8 outputs.<br />
 
1. Total current on both VDD-3V3 outputs.<br />
 
1. Total current on both VDD-3V3 outputs.<br />
−
2. Applying the maximum voltage 3.6V results in shorten lifetime. Recommended value is smaller than 3.45V.<br />
+
3. Input current is limited by 1+1,8kOhm resistors (voltage divider) connected in series.<br />
−
3. Input current is limited by 30k resistor connected in series.<br />
+
4. Depends on logic state on ET1-VDD-SEL (ET1-VDD-SEL='0' -> V=1.8V, ET1-VDD-SEL='1' or left open -> V=3.3V, internally pull-up'ed.).<br />
 +
5. JTAG/SWD interface lines are 1.8V compatible.<br />
 +
6. "x" means 0...7.<br />
  
 
== SoM pinout ==
 
== SoM pinout ==
 
Important notes:
 
Important notes:
−
<br />1. Detail pin configurations description you can find, edit and arrange in dedicated MEX file (with free "iMX PinTool" configurational tool).
+
<br />1. Detail pin configurations description you can find, edit and arrange in dedicated SCFG file (with free "Smart Configurator" tool).
−
<br />2. JTAG-MOD (ball G2) is permanently connected to GND
+
<br />2. On-board eMMC memory is connected to SDIO0 interface.
−
<br />3. BOOT-MODE0 – RECOVERY line 0 -> BOOT-MODE0=1
+
<br />3. Optional on-board QSPI Flash memory is connected to QSPI0 interface.
−
<br />4. BOOT-MODE1...MODE3 are premanently connected to GND
+
<br />4. SDIO1 interface is used to communication with Murata 1DX radio module.
−
<br />5. SDIO2 interface is used to communication with Murata 1ZM radio module
+
<br />5. UART2 is used to communication with BT-BLE interatted with Murata 1DX radio module.
−
<br />6. eMMC memory is connected to SDIO3 interface
+
<br />6. I2C3 is used to communication with on-board PMIC.
  
  
 
{| class="wikitable"  
 
{| class="wikitable"  
 
|-
 
|-
−
! <br />SOM pin number
+
! SOM pin number
−
! <br />Default function
+
! Default function
−
! <br />GPIO
+
! GPIO
−
! <br />FCBGA548 ball
+
! BGA456 ball
−
! <br />Notes
+
! Notes
 
|-
 
|-
−
| <br />1
+
| 1
−
| <br />GND
+
| GND
−
| <br />-
+
| Power
−
| <br />-
+
| -
−
| <br />
+
|  
 
|-
 
|-
−
| <br />2
+
| 2
−
| <br />GND
+
| GND
−
| <br />-
+
| Power
−
| <br />-
+
| -
−
| <br />
+
|  
 
|-
 
|-
−
| <br />3
+
| 3
−
| <br />JTAG-TMS
+
| ET0-PHY-RST
−
| <br />-
+
| P47-1
−
| <br />G14
+
| A20
−
| <br />3.3V  power domain
+
| 1.8V Power Domain<br />     GPIO mode not allowed
 
|-
 
|-
−
| <br />4
+
| 4
−
| <br />UART4-TXD
+
| PWR-GOOD
−
| <br />GPIO5.29
+
| Output
−
| <br />AH5
+
|  
−
| <br />3.3V  power domain
+
| PMIC power-good signalling for external devices
 
|-
 
|-
−
| <br />5
+
| 5
−
| <br />JTAG-TCK
+
| ET0-INT
−
| <br />-
+
| P47-0
−
| <br />G18
+
| B20
−
| <br />3.3V   power domain
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />6
+
| 6
−
| <br />UART4-RXD
+
| PWR-ON
−
| <br />GPIO5.28
+
| Input
−
| <br />AJ5
+
|
−
| <br />3.3V   power domain
+
| PMIC PWRON input (on-off  function)<br />     Internal pull-down<br />     Connect to GND if not used<br />     Connect to VDD-3V3 with external pull-up resistor (4.7kOhm) and pushbutton   to GND if used
 
|-
 
|-
−
| <br />7
+
| 7
−
| <br />JTAG-TDO
+
| ET0-MDIO
−
| <br />-
+
| I/O
−
| <br />F14
+
| U1
−
| <br />3.3V  power domain
+
| 1.8V Power Domain<br />     GPIO mode not allowed
 
|-
 
|-
−
| <br />8
+
| 8
−
| <br />CAN1-TX
+
| PWR-FAIL
−
| <br />GPIO5.03
+
| Input
−
| <br />AE18
+
|  
−
| <br />3.3V  power domain
+
| PMIC enable-input:<br />     PWR-FAIL='0' -> SOM power supply is off<br />     PWR-FAIL='1' or left open -> SOM power supply is on<br />     Can bue used as cold-reset input (active low)
 
|-
 
|-
−
| <br />9
+
| 9
−
| <br />JTAG-TDI
+
| ET0-MDC
−
| <br />-
+
| I/O
−
| <br />G16
+
| U2
−
| <br />3.3V  power domain
+
| 1.8V Power Domain<br />     GPIO mode not allowed
 
|-
 
|-
−
| <br />10
+
| 10
−
| <br />CAN1-RX
+
| RESET-OUT
−
| <br />GPIO5.04
+
| Output
−
| <br />AD18
+
|  
−
| <br />3.3V  power domain
+
| RESET output for external peripherals
 
|-
 
|-
−
| <br />11
+
| 11
−
| <br />VDD-3V3
+
| GND
−
| <br />-
+
| Power
−
| <br />-
+
| -
−
| <br />3.3V  power supply output for external accesories, load max. 300mA
+
|  
 
|-
 
|-
−
| <br />12
+
| 12
−
| <br />CAN2-TX
+
| RESET-IN
−
| <br />GPIO4.26
+
| Input
−
| <br />AH16
+
|  
−
| <br />3.3V  power domain
+
| MPU reset input, active low
 
|-
 
|-
−
| <br />13
+
| 13
−
| <br />I2C2-SDA
+
| ET0-RXC
−
| <br />GPIO5.17
+
| I/O
−
| <br />AE8
+
| P2
−
| <br />3.3V  power domain
+
| 1.8V Power Domain<br />     GPIO mode not allowed
 
|-
 
|-
−
| <br />14
+
| 14
−
| <br />CAN2-RX
+
| GND
−
| <br />GPIO4.27
+
| Power
−
| <br />AJ15
+
| -
−
| <br />3.3V  power domain
+
|  
 
|-
 
|-
−
| <br />15
+
| 15
−
| <br />I2C2-SCL
+
| ET0-RX-CTL
−
| <br />GPIO5.16
+
| I/O
−
| <br />AH6
+
| P1
−
| <br />3.3V  power domain
+
| 1.8V Power Domain<br />     GPIO mode not allowed
 
|-
 
|-
−
| <br />16
+
| 16
−
| <br />GPIO5.05
+
| UART0-RXD
−
| <br />-
+
| P38-1
−
| <br />AC18
+
| B15
−
| <br />3.3V   power domain
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />17
+
| 17
−
| <br />GND
+
| ET0-RXD0
−
| <br />-
+
| I/O
−
| <br />-
+
| R2
−
| <br />
+
| 1.8V Power Domain<br />     GPIO mode not allowed
 
|-
 
|-
−
| <br />18
+
| 18
−
| <br />GPIO5.23
+
| UART0-TXD
−
| <br />-
+
| P38-0
−
| <br />AJ3
+
| A15
−
| <br />3.3V   power domain
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />19
+
| 19
−
| <br />SAI3-MCLK
+
| ET0-RXD1
−
| <br />GPIO5.02
+
| I/O
−
| <br />AJ20
+
| R1
−
| <br />3.3V  power domain
+
| 1.8V Power Domain<br />     GPIO mode not allowed
 
|-
 
|-
−
| <br />20
+
| 20
−
| <br />GPIO5.22
+
| UART1-CTS
−
| <br />-
+
| P41-0
−
| <br />AD6
+
| E17
−
| <br />3.3V   power domain
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />21
+
| 21
−
| <br />GND
+
| ET0-RXD2
−
| <br />-
+
| I/O
−
| <br />-
+
| T2
−
| <br />
+
| 1.8V Power Domain<br />     GPIO mode not allowed
 
|-
 
|-
−
| <br />22
+
| 22
−
| <br />NC
+
| UART1-RTS
−
| <br />-
+
| P41-1
−
| <br />-
+
| A18
−
| <br />
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />23
+
| 23
−
| <br />SAI3-TXD
+
| ET0-RXD3
−
| <br />GPIO5.01
+
| I/O
−
| <br />AH18
+
| T1
−
| <br />3.3V  power domain
+
| 1.8V Power Domain<br />     GPIO mode not allowed
 
|-
 
|-
−
| <br />24
+
| 24
−
| <br />NC
+
| UART1-RXD
−
| <br />-
+
| P40-0
−
| <br />-
+
| C17
−
| <br />
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />25
+
| 25
−
| <br />SAI3-TXC
+
| GND
−
| <br />GPIO5.00
+
| Power
−
| <br />AH19
+
| -
−
| <br />3.3V  power domain
+
|  
 
|-
 
|-
−
| <br />26
+
| 26
−
| <br />UART3-RXD
+
| UART1-TXD
−
| <br />GPIO5.26
+
| P40-1
−
| <br />AE6
+
| B17
−
| <br />3.3V   power domain
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />27
+
| 27
−
| <br />SAI3-TXFS
+
| ET0-TX-CTL
−
| <br />GPIO4.31
+
| I/O
−
| <br />AC16
+
| N2
−
| <br />3.3V  power domain
+
| 1.8V Power Domain<br />     GPIO mode not allowed
 
|-
 
|-
−
| <br />28
+
| 28
−
| <br />UART3-TXD
+
| UART4-RXD
−
| <br />GPIO5.27
+
| P2-1
−
| <br />AJ4
+
| A13
−
| <br />3.3V   power domain
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />29
+
| 29
−
| <br />SAI3-RXD
+
| ET0-TXC
−
| <br />GPIO4.30
+
| I/O
−
| <br />AF18
+
| N1
−
| <br />3.3V  power domain
+
| 1.8V Power Domain<br />     GPIO mode not allowed
 
|-
 
|-
−
| <br />30
+
| 30
−
| <br />UART2-RXD
+
| UART4-TXD
−
| <br />GPIO5.24
+
| P2-0
−
| <br />AF6
+
| B13
−
| <br />3.3V   power domain
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />31
+
| 31
−
| <br />SAI3-RXC
+
| ET0-TXD3
−
| <br />GPIO4.29
+
| I/O
−
| <br />AJ18
+
| N1
−
| <br />3.3V  power domain
+
| 1.8V Power Domain<br />     GPIO mode not allowed
 
|-
 
|-
−
| <br />32
+
| 32
−
| <br />UART2-TXD
+
| UART3-RXD
−
| <br />GPIO5.25
+
| P0-1
−
| <br />AH4
+
| B12
−
| <br />3V3  power domain
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />33
+
| 33
−
| <br />SAI3-RXFS
+
| ET0-TXD2
−
| <br />GPIO4.28
+
| I/O
−
| <br />AJ19
+
| L2
−
| <br />3.3V  power domain
+
| 1.8V Power Domain<br />     GPIO mode not allowed
 
|-
 
|-
−
| <br />34
+
| 34
−
| <br />I2C3-SCL
+
| UART3-TXD
−
| <br />GPIO5.18
+
| P0-0
−
| <br />AJ7
+
| A11
−
| <br />3.3V   power domain
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />35
+
| 35
−
| <br />GND
+
| ET0-TXD1
−
| <br />-
+
| I/O
−
| <br />-
+
| M2
−
| <br />
+
| 1.8V Power Domain<br />     GPIO mode not allowed
 
|-
 
|-
−
| <br />36
+
| 36
−
| <br />I2C3-SDA
+
| VBAT-RTC
−
| <br />GPIO5.19
+
| Power
−
| <br />AJ6
+
| -
−
| <br />3.3V   power domain
+
| RTC 3V battery
 
|-
 
|-
−
| <br />37
+
| 37
−
| <br />DDC-SDA
+
| ET0-TXD0
−
| <br />GPIO3.27
+
| I/O
−
| <br />AF22
+
| M1
−
| <br />
+
| 1.8V Power Domain<br />     GPIO mode not allowed
 
|-
 
|-
−
| <br />38
+
| 38
−
| <br />GND
+
| GND
−
| <br />-
+
| Power
−
| <br />-
+
| -
−
| <br />
+
|  
 
|-
 
|-
−
| <br />39
+
| 39
−
| <br />DDC-SCL
+
| VDD-1V8
−
| <br />GPIO3.26
+
| Power
−
| <br />AC22
+
|  
−
| <br />I2C5-SCL
+
| 1.8V output for external devices, max. 300 mA
 
|-
 
|-
−
| <br />40
+
| 40
−
| <br />SPI2-CS0
+
| VDD-1V8
−
| <br />GPIO5.13
+
| Power
−
| <br />AJ22
+
|  
−
| <br />3.3V  power domain
+
| 1.8V output for external devices, max. 300 mA
 
|-
 
|-
−
| <br />41
+
| 41
−
| <br />HDMI-HPD
+
| VDD-5V0
−
| <br />GPIO3.29
+
| Power
−
| <br />AE22
+
|  
−
| <br />
+
| External power supply
 
|-
 
|-
−
| <br />42
+
| 42
−
| <br />SPI2-SCLK
+
| VDD-5V0
−
| <br />GPIO5.10
+
| Power
−
| <br />AH21
+
|  
−
| <br />3.3V  power domain
+
| External power supply
 
|-
 
|-
−
| <br />43
+
| 43
−
| <br />HDMI-EARC-AUX
+
| VDD-5V0
−
| <br />-
+
| Power
−
| <br />AH23
+
|  
−
| <br />Dedicated  HDMI interface line
+
| External power supply
 
|-
 
|-
−
| <br />44
+
| 44
−
| <br />SPI2-MISO
+
| VDD-5V0
−
| <br />GPIO5.12
+
| Power
−
| <br />AH20
+
|  
−
| <br />3.3V  power domain
+
| External power supply
 
|-
 
|-
−
| <br />45
+
| 45
−
| <br />HDMI-EARC_N
+
| VDD-5V0
−
| <br />-
+
| Power
−
| <br />AH22
+
|  
−
| <br />Dedicated  HDMI interface line
+
| External power supply
 
|-
 
|-
−
| <br />46
+
| 46
−
| <br />SPI2-MOSI
+
| VDD-5V0
−
| <br />GPIO5.11
+
| Power
−
| <br />AJ21
+
|  
−
| <br />3.3V  power domain
+
| External power supply
 
|-
 
|-
−
| <br />47
+
| 47
−
| <br />HDMI-EARC_P
+
| VDD-5V0
−
| <br />-
+
| Power
−
| <br />AJ23
+
|  
−
| <br />Dedicated  HDMI interface line
+
| External power supply
 
|-
 
|-
−
| <br />48
+
| 48
−
| <br />SPI1-CS0
+
| VDD-5V0
−
| <br />GPIO5.09
+
| Power
−
| <br />AE20
+
|  
−
| <br />3.3V  power domain
+
| External power supply
 
|-
 
|-
−
| <br />49
+
| 49
−
| <br />HDMI-CEC
+
| VDD-5V0
−
| <br />GPIO3.28
+
| Power
−
| <br />AD22
+
|  
−
| <br />
+
| External power supply
 
|-
 
|-
−
| <br />50
+
| 50
−
| <br />SPI1-SCLK
+
| VDD-5V0
−
| <br />GPIO5.06
+
| Power
−
| <br />AF20
+
|  
−
| <br />3.3V  power domain
+
| External power supply
 
|-
 
|-
−
| <br />51
+
| 51
−
| <br />GND
+
| NC
−
| <br />-
+
| Not Connected
−
| <br />-
+
| -
−
| <br />
+
|  
 
|-
 
|-
−
| <br />52
+
| 52
−
| <br />SPI1-MISO
+
| NC
−
| <br />GPIO5.08
+
| Not Connected
−
| <br />AD20
+
| -
−
| <br />3.3V  power domain
+
|  
 
|-
 
|-
−
| <br />53
+
| 53
−
| <br />HDMI-CK_N
+
| VDD-3V3
−
| <br />-
+
| Power
−
| <br />AJ24
+
|  
−
| <br />Dedicated  HDMI interface line
+
| 3.3V output for external devices, max. 300mA
 
|-
 
|-
−
| <br />54
+
| 54
−
| <br />SPI1-MOSI
+
| VDD-3V3
−
| <br />GPIO5.07
+
| Power
−
| <br />AC20
+
| -
−
| <br />3.3V   power domain
+
| 3.3V output for external devices, max. 300mA
 
|-
 
|-
−
| <br />55
+
| 55
−
| <br />HDMI-CK_P
+
| GND
−
| <br />-
+
| Power
−
| <br />AH24
+
| -
−
| <br />Dedicated  HDMI interface line
+
|  
 
|-
 
|-
−
| <br />56
+
| 56
−
| <br />GND
+
| SYSLED
−
| <br />-
+
| P42-0
−
| <br />-
+
| AG4
−
| <br />
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />57
+
| 57
−
| <br />GND
+
| VPROG
−
| <br />-
+
| NC
−
| <br />-
+
| -
−
| <br />
+
| For SoMLabs purposes only, leave unconnected
 
|-
 
|-
−
| <br />58
+
| 58
−
| <br />LVDS0-DATA3_P
+
| GND
−
| <br />-
+
| Power
−
| <br />C29
+
| -
−
| <br />Dedicated  LVDS interface line
+
|  
 
|-
 
|-
−
| <br />59
+
| 59
−
| <br />HDMI-D0_N
+
| BOOT-RECOVERY
−
| <br />-
+
| Input
−
| <br />AJ25
+
| colspan="2" | BOOT input, active low   during reset
−
| <br />Dedicated   HDMI interface line
 
 
|-
 
|-
−
| <br />60
+
| 60
−
| <br />LVDS0-DATA3_N
+
| SSI-MCLK
−
| <br />-
+
| AUDIO_CLK1
−
| <br />D28
+
| E12
−
| <br />Dedicated  LVDS interface line
+
| -
 +
 
 
|-
 
|-
−
| <br />61
+
| 61
−
| <br />HDMI-D0_P
+
| GND
−
| <br />-
+
| Power
−
| <br />AH25
+
| -
−
| <br />Dedicated  HDMI interface line
+
|  
 
|-
 
|-
−
| <br />62
+
| 62
−
| <br />GND
+
| SSI0-RXD
−
| <br />-
+
| P7-1
−
| <br />-
+
| AH28
−
| <br />
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />63
+
| 63
−
| <br />HDMI-D1_N
+
| ET1-VDD-SEL
−
| <br />-
+
| Input
−
| <br />AJ26
+
|  
−
| <br />Dedicated  HDMI interface line
+
| Ethernet 1 (ET1) interface  voltage selection:<br />     ET1-VDD-SEL='0' -> V=1.8V<br />     ET1-VDD-SEL='1' or left open -> V=3.3V<br />     The line has internal pull-up.
 
|-
 
|-
−
| <br />64
+
| 64
−
| <br />LVDS0-CLK_P
+
| SSI0-TXD
−
| <br />-
+
| P7-0
−
| <br />A28
+
| AJ28
−
| <br />Dedicated  LVDS interface line
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />65
+
| 65
−
| <br />HDMI-D1_P
+
| ET1-PHY-RST
−
| <br />-
+
| P47-3
−
| <br />AH26
+
| B21
−
| <br />Dedicated  HDMI interface line
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />66
+
| 66
−
| <br />LVDS0-CLK_N
+
| SSI0-RCK
−
| <br />-
+
| P6-1
−
| <br />B28
+
| AH27
−
| <br />Dedicated  LVDS interface line
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />67
+
| 67
−
| <br />HDMI-D2_N
+
| ET1-INT
−
| <br />-
+
| P47-2
−
| <br />AJ27
+
| A21
−
| <br />Dedicated  HDMI interface line
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />68
+
| 68
−
| <br />GND
+
| SSI0-BCK
−
| <br />-
+
| P6-0
−
| <br />-
+
| AJ27
−
| <br />
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />69
+
| 69
−
| <br />HDMI-D2_P
+
| ET1-MDIO
−
| <br />-
+
| P37-1
−
| <br />AH27
+
| W1
−
| <br />Dedicated  HDMI interface line
+
| 1.8V or 3.3V Power Domain  selected by ET1-VDD-SEL<br />     GPIO allowed only for 3.3V.
 
|-
 
|-
−
| <br />70
+
| 70
−
| <br />LVDS0-DATA2_P
+
| GND
−
| <br />-
+
| Power
−
| <br />B29
+
| -
−
| <br />Dedicated  LVDS interface line
+
|  
 
|-
 
|-
−
| <br />71
+
| 71
−
| <br />GND
+
| ET1-MDC
−
| <br />-
+
| P37-0
−
| <br />-
+
| W2
−
| <br />
+
| 1.8V or 3.3V Power Domain  selected by ET1-VDD-SEL<br />     GPIO allowed only for 3.3V.
 
|-
 
|-
−
| <br />72
+
| 72
−
| <br />LVDS0-DATA2_N
+
| CAN1-RX
−
| <br />-
+
| P13-0
−
| <br />C28
+
| AF23
−
| <br />Dedicated  LVDS interface line
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />73
+
| 73
−
| <br />SD1-DQS
+
| GND
−
| <br />GPIO2.11
+
| Power
−
| <br />W26
+
| -
−
| <br />1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT)
+
|  
 
|-
 
|-
−
| <br />74
+
| 74
−
| <br />LVDS0-DATA1_P
+
| CAN1-TX
−
| <br />-
+
| P12-1
−
| <br />A27
+
| AE23
−
| <br />Dedicated  LVDS interface line
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />75
+
| 75
−
| <br />SD1-CD
+
| ET1-RXC
−
| <br />GPIO2.10
+
| P33-1
−
| <br />W25
+
| AC1
−
| <br />1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT)
+
| 1.8V or 3.3V Power Domain  selected by ET1-VDD-SEL<br />     GPIO allowed only for 3.3V.
 
|-
 
|-
−
| <br />76
+
| 76
−
| <br />LVDS0-DATA1_N
+
| CAN0-RX
−
| <br />-
+
| P42-2
−
| <br />B27
+
| AJ3
−
| <br />Dedicated  LVDS interface line
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />77
+
| 77
−
| <br />SD1-DATA7
+
| ET1-RX-CTL
−
| <br />GPIO2.09
+
| P34-0
−
| <br />U25
+
| AC2
−
| <br />1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT)
+
| 1.8V or 3.3V Power Domain  selected by ET1-VDD-SEL<br />     GPIO allowed only for 3.3V.
 
|-
 
|-
−
| <br />78
+
| 78
−
| <br />LVDS0-DATA0_P
+
| CAN0-TX
−
| <br />-
+
| P42-1
−
| <br />A26
+
| AE7
−
| <br />Dedicated  LVDS interface line
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />79
+
| 79
−
| <br />SD1-DATA6
+
| ET1-RXD0
−
| <br />GPIO2.08
+
| P34-1
−
| <br />AA28
+
| AC3
−
| <br />1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT)
+
| 1.8V or 3.3V Power Domain  selected by ET1-VDD-SEL<br />     GPIO allowed only for 3.3V.
 
|-
 
|-
−
| <br />80
+
| 80
−
| <br />LVDS0-DATA0_N
+
| GND
−
| <br />-
+
| Power
−
| <br />B26
+
| -
−
| <br />Dedicated  LVDS interface line
+
|  
 
|-
 
|-
−
| <br />81
+
| 81
−
| <br />SD1-DATA5
+
| ET1-RXD1
−
| <br />GPIO2.07
+
| P35-0
−
| <br />AA29
+
| AC4
−
| <br />1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT)
+
| 1.8V or 3.3V Power Domain  selected by ET1-VDD-SEL<br />     GPIO allowed only for 3.3V.
 
|-
 
|-
−
| <br />82
+
| 82
−
| <br />GND
+
| I2C3-SCL-EXT
−
| <br />-
+
| P46-3
−
| <br />-
+
| D13
−
| <br />
+
| I2C interface used for on-board  PMIC configuration<br />     Built-in pull-up resistor 2.2kOhm connected to 3.3V<br />     3.3V Power Domain
 
|-
 
|-
−
| <br />83
+
| 83
−
| <br />SD1-DATA4
+
| ET1-RXD2
−
| <br />GPIO2.06
+
| P35-1
−
| <br />U26
+
| AB4
−
| <br />1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT)
+
| 1.8V or 3.3V Power Domain  selected by ET1-VDD-SEL<br />     GPIO allowed only for 3.3V.
 
|-
 
|-
−
| <br />84
+
| 84
−
| <br />LVDS1-DATA3_P
+
| I2C3-SDA-EXT
−
| <br />-
+
| P46-2
−
| <br />C29
+
| C12
−
| <br />Dedicated  LVDS interface line
+
| I2C interface used for on-board  PMIC configuration<br />     Built-in pull-up resistor 2.2kOhm connected to 3.3V<br />     3.3V Power Domain
 
|-
 
|-
−
| <br />85
+
| 85
−
| <br />SD1-DATA1
+
| ET1-RXD3
−
| <br />GPIO2.03
+
| P36-0
−
| <br />Y28
+
| AB3
−
| <br />1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT)
+
| 1.8V or 3.3V Power Domain  selected by ET1-VDD-SEL<br />     GPIO allowed only for 3.3V.
 
|-
 
|-
−
| <br />86
+
| 86
−
| <br />LVDS1-DATA3_N
+
| I2C2-SCL
−
| <br />-
+
| P42-4
−
| <br />D28
+
| AC5
−
| <br />Dedicated  LVDS interface line
+
| Built-in pull-up resistor 2.2kOhm connected to 3.3V
 
|-
 
|-
−
| <br />87
+
| 87
−
| <br />SD1-DATA0
+
| GND
−
| <br />GPIO2.02
+
| Power
−
| <br />Y29
+
| -
−
| <br />1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT)
+
|  
 
|-
 
|-
−
| <br />88
+
| 88
−
| <br />GND
+
| I2C2-SDA
−
| <br />-
+
| P42-3
−
| <br />-
+
| AH3
−
| <br />
+
| Built-in pull-up resistor 2.2kOhm connected to 3.3V
 
|-
 
|-
−
| <br />89
+
| 89
−
| <br />GND
+
| ET1-TX-CTL
−
| <br />-
+
| P29-1
−
| <br />-
+
| Y1
−
| <br />
+
| 1.8V or 3.3V Power Domain  selected by ET1-VDD-SEL<br />     GPIO allowed only for 3.3V.
 
|-
 
|-
−
| <br />90
+
| 90
−
| <br />LVDS1-CLK_P
+
| P19-0
−
| <br />-
+
| P19-0
−
| <br />A28
+
| B1
−
| <br />Dedicated  LVDS interface line
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />91
+
| 91
−
| <br />SD1-CLK
+
| ET1-TXC
−
| <br />GPIO2.00
+
| P29-0
−
| <br />W28
+
| AB2
−
| <br />1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT)
+
| 1.8V or 3.3V Power Domain  selected by ET1-VDD-SEL<br />     GPIO allowed only for 3.3V.
 
|-
 
|-
−
| <br />92
+
| 92
−
| <br />LVDS1-CLK_N
+
| P18-0
−
| <br />-
+
| P18-0
−
| <br />B28
+
| C2
−
| <br />Dedicated  LVDS interface line
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />93
+
| 93
−
| <br />SD1-CMD
+
| ET1-TXD3
−
| <br />GPIO2.01
+
| P31-1
−
| <br />W29
+
| Y2
−
| <br />1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT)
+
| 1.8V or 3.3V Power Domain  selected by ET1-VDD-SEL<br />     GPIO allowed only for 3.3V.
 
|-
 
|-
−
| <br />94
+
| 94
−
| <br />GND
+
| GND
−
| <br />-
+
| Power
−
| <br />-
+
| -
−
| <br />
+
|  
 
|-
 
|-
−
| <br />95
+
| 95
−
| <br />SD1-DATA3
+
| ET1-TXD2
−
| <br />GPIO2.05
+
| P31-0
−
| <br />V28
+
| AA1
−
| <br />1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT)
+
| 1.8V or 3.3V Power Domain  selected by ET1-VDD-SEL<br />     GPIO allowed only for 3.3V.
 
|-
 
|-
−
| <br />96
+
| 96
−
| <br />LVDS1-DATA2_P
+
| P18-1
−
| <br />-
+
| P18-1
−
| <br />B29
+
| D3
−
| <br />Dedicated  LVDS interface line
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />97
+
| 97
−
| <br />SD1-DATA2
+
| ET1-TXD1
−
| <br />GPIO2.04
+
| P30-1
−
| <br />V29
+
| AA2
−
| <br />1.8/3.3V IO voltage standard (controlled by SDIO-VSELECT)
+
| 1.8V or 3.3V Power Domain  selected by ET1-VDD-SEL<br />     GPIO allowed only for 3.3V.
 
|-
 
|-
−
| <br />98
+
| 98
−
| <br />LVDS1-DATA2_N
+
| P45-0
−
| <br />-
+
| P45-0
−
| <br />C28
+
| A8
−
| <br />Dedicated  LVDS interface line
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />99
+
| 99
−
| <br />SD1-NVCC
+
| ET1-TXD0
−
| <br />-
+
| P30-0
−
| <br />-
+
| AB1
−
| <br />SD1 1.8/3.3V power supply output (controlled by SDIO-VSELECT),  load max. 80 mA
+
| 1.8V or 3.3V Power Domain  selected by ET1-VDD-SEL<br />     GPIO allowed only for 3.3V.
 
|-
 
|-
−
| <br />100
+
| 100
−
| <br />LVDS1-DATA1_P
+
| P45-2
−
| <br />-
+
| P45-2
−
| <br />A27
+
| A9
−
| <br />Dedicated  LVDS interface line
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />101
+
| 101
−
| <br />VDD-3V3
+
| GND
−
| <br />-
+
| Power
−
| <br />-
+
| -
−
| <br />3.3V  power supply output for external accesories, load max. 300mA
+
|  
 
|-
 
|-
−
| <br />102
+
| 102
−
| <br />LVDS1-DATA1_N
+
| P45-3
−
| <br />-
+
| P45-3
−
| <br />B27
+
| B9
−
| <br />Dedicated  LVDS interface line
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />103
+
| 103
−
| <br />USB2-VBUS-OC
+
| USB1-D_N
−
| <br />GPIO1.15
+
| Analog I/O
−
| <br />B5
+
| -
−
| <br />3.3V  power domain
+
|  
 
|-
 
|-
−
| <br />104
+
| 104
−
| <br />LVDS1-DATA0_P
+
| P46-0
−
| <br />-
+
| P46-0
−
| <br />A26
+
| B10
−
| <br />Dedicated  LVDS interface line
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />105
+
| 105
−
| <br />USB2-VBUS
+
| USB1-D_P
−
| <br />
+
| Analog I/O
−
| <br />D12
+
| -
−
| <br />
+
|  
 
|-
 
|-
−
| <br />106
+
| 106
−
| <br />LVDS1-DATA0_N
+
| P46-1
−
| <br />-
+
| P46-1
−
| <br />C26
+
| A10
−
| <br />Dedicated  LVDS interface line
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />107
+
| 107
−
| <br />USB2-VBUS-EN
+
| USB1-OC
−
| <br />GPIO1.14
+
| P8-1
−
| <br />A4
+
| AJ20
−
| <br />3.3V   power domain
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />108
+
| 108
−
| <br />GND
+
| P45-1
−
| <br />-
+
| P45-1
−
| <br />-
+
| D12
−
| <br />
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />109
+
| 109
−
| <br />USB2-D_P
+
| USB1-EN
−
| <br />-
+
| P8-0
−
| <br />D14
+
| AH19
−
| <br />Dedicated  USB2.0 interface line
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />110
+
| 110
−
| <br />PCIe-CLK_P
+
| P1-1
−
| <br />-
+
| P1-1
−
| <br />D16
+
| A12
−
| <br />CLKp  line of PCIe interface (serial 100nF is necessary)
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />111
+
| 111
−
| <br />USB2-D_N
+
| GND
−
| <br />-
+
| Power
−
| <br />E14
+
| -
−
| <br />Dedicated  USB2.0 interface line
+
|  
 
|-
 
|-
−
| <br />112
+
| 112
−
| <br />PCIe-CLK_N
+
| P3-1
−
| <br />-
+
| P3-1
−
| <br />E16
+
| B14
−
| <br />CLKn  line of PCIe interface (serial 100nF is necessary)
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />113
+
| 113
−
| <br />USB2-ID
+
| USB0-OC
−
| <br />
+
| P5-0
−
| <br />E12
+
| AJ4
−
| <br />Dedicated  USB2.0 interface line
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />114
+
| 114
−
| <br />GND
+
| P1-0
−
| <br />-
+
| P1-0
−
| <br />-
+
| C13
−
| <br />
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />115
+
| 115
−
| <br />USB2-SS-RX_P
+
| USB0-EN
−
| <br />-
+
| P4-0
−
| <br />A12
+
| AJ5
−
| <br />Dedicated  USB3.0 interface line
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />116
+
| 116
−
| <br />PCIe-TXN_P
+
| GND
−
| <br />-
+
| Power
−
| <br />A15
+
| -
−
| <br />TXp  line of PCIe interface (serial 100nF is necessary)
+
|  
 
|-
 
|-
−
| <br />117
+
| 117
−
| <br />USB2-SS-RX_N
+
| USB0-ID
−
| <br />-
+
| P5-1
−
| <br />B12
+
| AH4
−
| <br />Dedicated  USB3.0 interface line
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />118
+
| 118
−
| <br />PCIe-TXN_N
+
| P3-0
−
| <br />-
+
| P3-0
−
| <br />B15
+
| A14
−
| <br />TXn  line of PCIe interface (serial 100nF is necessary)
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />119
+
| 119
−
| <br />USB2-SS-TX_N
+
| USB0-D_N
−
| <br />-
+
| Analog I/O
−
| <br />B13
+
| -
−
| <br />Dedicated  USB3.0 interface line
+
|  
 
|-
 
|-
−
| <br />120
+
| 120
−
| <br />GND
+
| P48-2
−
| <br />-
+
| P48-2
−
| <br />-
+
| A22
−
| <br />
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />121
+
| 121
−
| <br />USB2-SS-TX_P
+
| USB0-D_P
−
| <br />-
+
| Analog I/O
−
| <br />A13
+
| -
−
| <br />Dedicated  USB3.0 interface line
+
|  
 
|-
 
|-
−
| <br />122
+
| 122
−
| <br />PCIe-RXN_P
+
| P4-1
−
| <br />-
+
| P4-1
−
| <br />A14
+
| AH6
−
| <br />TXn  line of PCIe interface
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />123
+
| 123
−
| <br />GND
+
| USB0-VBUS
−
| <br />-
+
| Dedicated input
−
| <br />-
+
| AH10
−
| <br />
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />124
+
| 124
−
| <br />PCIe-RXN_N
+
| P7-2
−
| <br />-
+
| P7-2
−
| <br />B14
+
| AJ19
−
| <br />TXn  line of PCIe interface
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />125
+
| 125
−
| <br />USB1-VBUS-OC
+
| GND
−
| <br />GPIO1.13
+
| Power
−
| <br />A6
+
| -
−
| <br />3.3V  power domain
+
|  
 
|-
 
|-
−
| <br />126
+
| 126
−
| <br />GND
+
| GND
−
| <br />-
+
| Power
−
| <br />-
+
| -
−
| <br />
+
|  
 
|-
 
|-
−
| <br />127
+
| 127
−
| <br />USB1-VBUS
+
| P11-1
−
| <br />-
+
| P11-1
−
| <br />A11
+
| AF22
−
| <br />Dedicated  USB2.0 interface line
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />128
+
| 128
−
| <br />GPIO1.08
+
| P11-0
−
| <br />GPIO1.08
+
| P11-0
−
| <br />A8
+
| AG22
−
| <br />3.3V   power domain
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />129
+
| 129
−
| <br />USB1-VBUS-EN
+
| P8-2
−
| <br />GPIO1.12
+
| P8-2
−
| <br />A5
+
| AH20
−
| <br />3.3V   power domain
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />130
+
| 130
−
| <br />GPIO1.09
+
| P12-0
−
| <br />GPIO1.09
+
| P12-0
−
| <br />B8
+
| AE22
−
| <br />3.3V   power domain
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />131
+
| 131
−
| <br />USB1-D_P
+
| P9-1
−
| <br />-
+
| P9-1
−
| <br />D10
+
| AH21
−
| <br />Dedicated  USB2.0 interface line
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />132
+
| 132
−
| <br />GPIO1.00
+
| P13-1
−
| <br />-
+
| P13-1
−
| <br />A7
+
| AG23
−
| <br />3.3V   power domain
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />133
+
| 133
−
| <br />USB1-D_N
+
| P9-0
−
| <br />-
+
| P9-0
−
| <br />E10
+
| AJ21
−
| <br />Dedicated  USB2.0 interface line
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />134
+
| 134
−
| <br />GPIO1.10
+
| SPI1-SSL
−
| <br />-
+
| P44-3
−
| <br />B7
+
| B19
−
| <br />3.3V   power domain
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />135
+
| 135
−
| <br />USB1-ID
+
| SPI0-SSL
−
| <br />-
+
| P43-3
−
| <br />B11
+
| B19
−
| <br />Dedicated  USB2.0 interface line
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />136
+
| 136
−
| <br />GPIO1.01
+
| SPI1-MISO
−
| <br />-
+
| P44-2
−
| <br />E8
+
| D18
−
| <br />3.3V   power domain
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />137
+
| 137
−
| <br />USB1-SS-RX_P
+
| SPI0-MISO
−
| <br />-
+
| P43-2
−
| <br />A9
+
| E18
−
| <br />Dedicated  USB3.0 interface line
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />138
+
| 138
−
| <br />GPIO1.11
+
| SPI1-MOSI
−
| <br />-
+
| P44-1
−
| <br />D8
+
| F17
−
| <br />3.3V   power domain
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />139
+
| 139
−
| <br />USB1-SS-RX_N
+
| SPI0-MOSI
−
| <br />-
+
| P43-1
−
| <br />B9
+
| D17
−
| <br />Dedicated  USB3.0 interface line
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />140
+
| 140
−
| <br />GPIO1.07
+
| SPI1-CLK
−
| <br />-
+
| P44-0
−
| <br />F6
+
| A19
−
| <br />3.3V   power domain
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />141
+
| 141
−
| <br />USB1-SS-TX_N
+
| SPI0-CLK
−
| <br />-
+
| P43-0
−
| <br />C10
+
| B18
−
| <br />Dedicated  USB3.0 interface line
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />142
+
| 142
−
| <br />GPIO1.03
+
| GND
−
| <br />-
+
| Power
−
| <br />D6
+
| -
−
| <br />3.3V  power domain
+
|  
 
|-
 
|-
−
| <br />143
+
| 143
−
| <br />USB1-SS-TX_P
+
| GND
−
| <br />-
+
| Power
−
| <br />A10
+
| -
−
| <br />Dedicated  USB3.0 interface line
+
|  
 
|-
 
|-
−
| <br />144
+
| 144
−
| <br />GPIO1.04
+
| I2C1-SCL
−
| <br />-
+
| Dedicated I2C line
−
| <br />E6
+
| C23
−
| <br />3.3V   power domain
+
| RIIC1_SCL<br />     Built-in pull-up resistor 2.2kOhm connected to 3.3V
 
|-
 
|-
−
| <br />145
+
| 145
−
| <br />GND
+
| P14-0
−
| <br />-
+
| P14-0
−
| <br />-
+
| AF27
−
| <br />
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />146
+
| 146
−
| <br />GPIO1.05
+
| I2C1-SDA
−
| <br />-
+
| Dedicated I2C line
−
| <br />B4
+
| A24
−
| <br />3.3V   power domain
+
| RIIC1_SDA<br />     Built-in pull-up resistor 2.2kOhm connected to 3.3V
 
|-
 
|-
−
| <br />147
+
| 147
−
| <br />ENET2-INT
+
| P10-1
−
| <br />GPIO4.19
+
| P10-1
−
| <br />AJ13
+
| AH22
−
| <br />1.8V power domain
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />148
+
| 148
−
| <br />GPIO1.06
+
| I2C0-SCL
−
| <br />-
+
| Dedicated I2C line
−
| <br />A3
+
| B24
−
| <br />3.3V   power domain
+
| RIIC0_SCL<br />     Built-in pull-up resistor 2.2kOhm connected to 3.3V
 
|-
 
|-
−
| <br />149
+
| 149
−
| <br />ENET2-RXC
+
| P10-0
−
| <br />GPIO4.11
+
| P10-0
−
| <br />AJ12
+
| AJ22
−
| <br />1.8V power domain
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />150
+
| 150
−
| <br />SYS-LED
+
| I2C0-SDA
−
| <br />GPIO4.27
+
| Dedicated I2C line
−
| <br />AH15
+
| A25
−
| <br />3.3V   power domain
+
| RIIC0_SDA<br />     Built-in pull-up resistor 2.2kOhm connected to 3.3V
 
|-
 
|-
−
| <br />151
+
| 151
−
| <br />ENET2-RX-CTL
+
| P15-0
−
| <br />GPIO4.10
+
| P15-0
−
| <br />AF12
+
| AH23
−
| <br />1.8V power domain
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />152
+
| 152
−
| <br />RECOVERY
+
| GND
−
| <br />-
+
| Power
−
| <br />G10
+
| -
−
| <br />Recovery  input (BOOT-MODE0):<br />  <br />=0  during reset – start eMMC recovering<br />  <br />=1  or NC – normal operation
+
|  
 
|-
 
|-
−
| <br />153
+
| 153
−
| <br />ENET2-RXD0
+
| P14-1
−
| <br />GPIO4.06
+
| P14-1
−
| <br />AD10
+
| AJ23
−
| <br />1.8V power domain
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />154
+
| 154
−
| <br />I2C4-SCL
+
| ADC-CH7
−
| <br />GPIO5.20
+
| colspan="2" | Dedicated analog input
−
| <br />AF8
+
| 12-bit ADC, max. 1.8V on input
−
| <br />3.3V  power domain
 
 
|-
 
|-
−
| <br />155
+
| 155
−
| <br />ENET2-RXD1
+
| P16-0
−
| <br />GPIO4.07
+
| P16-0
−
| <br />AE10
+
| AH24
−
| <br />1.8V power domain
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />156
+
| 156
−
| <br />I2C4-SDA
+
| ADC-CH6
−
| <br />GPIO5.21
+
| colspan="2" | Dedicated analog input
−
| <br />AD8
+
| 12-bit ADC, max. 1.8V on input
−
| <br />3.3V  power domain
 
 
|-
 
|-
−
| <br />157
+
| 157
−
| <br />ENET2-RXD2
+
| P15-1
−
| <br />GPIO4.04
+
| P15-1
−
| <br />AH9
+
| AJ24
−
| <br />1.8V power domain
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />158
+
| 158
−
| <br />I2C1-SCL
+
| ADC-CH5
−
| <br />GPIO5.14
+
| colspan="2" | Dedicated analog input
−
| <br />AC8
+
| 12-bit ADC, max. 1.8V on input
−
| <br />3.3V  power domain
 
 
|-
 
|-
−
| <br />159
+
| 159
−
| <br />ENET2-RXD3
+
| P17-0
−
| <br />GPIO4.05
+
| P17-0
−
| <br />AJ8
+
| AH25
−
| <br />1.8V power domain
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />160
+
| 160
−
| <br />I2C1-SDA
+
| ADC-CH4
−
| <br />GPIO5.15
+
| colspan="2" | Dedicated analog input
−
| <br />AH7
+
| 12-bit ADC, max. 1.8V on input
−
| <br />3.3V  power domain
 
 
|-
 
|-
−
| <br />161
+
| 160
−
| <br />GND
+
| SSI-MCLK
−
| <br />-
+
| AUDIO-CLK
−
| <br />-
+
| E12
−
| <br />
+
| Reference clock output (for audio codec)
 
|-
 
|-
−
| <br />162
+
| 161
−
| <br />GND
+
| P16-1
−
| <br />-
+
| P16-1
−
| <br />-
+
| AJ25
−
| <br />
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />163
+
| 162
−
| <br />ENET2-TXC
+
| ADC-CH3
−
| <br />GPIO4.17
+
| colspan="2" | Dedicated analog input
−
| <br />AH14
+
| 12-bit ADC, max. 1.8V on input
−
| <br />1.8V power domain
 
 
|-
 
|-
−
| <br />164
+
| 163
−
| <br />CSI2-DATA3_P
+
| P17-2
−
| <br />-
+
| P17-2
−
| <br />A21
+
| AH26
−
| <br />MIPI-CSI  video input channel
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />165
+
| 164
−
| <br />ENET2-TX-CTL
+
| ADC-CH2
−
| <br />GPIO4.16
+
| colspan="2" | Dedicated analog input
−
| <br />AH13
+
| 12-bit ADC, max. 1.8V on input
−
| <br />1.8V power domain
 
 
|-
 
|-
−
| <br />166
+
| 165
−
| <br />CSI2-DATA3_N
+
| P17-1
−
| <br />-
+
| P17-1
−
| <br />B21
+
| AJ26
−
| <br />MIPI-CSI  video input channel
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />167
+
| 166
−
| <br />ENET2-TXD0
+
| ADC-CH1
−
| <br />GPIO4.12
+
| colspan="2" | Dedicated analog input
−
| <br />AJ11
+
| 12-bit ADC, max. 1.8V on input
−
| <br />1.8V power domain
 
 
|-
 
|-
−
| <br />168
+
| 167
−
| <br />CSI2-DATA2_P
+
| P13-2
−
| <br />-
+
| P13-2
−
| <br />A22
+
| AG26
−
| <br />MIPI-CSI  video input channel
+
| 3.3V Power Domain
 
|-
 
|-
−
| <br />169
+
| 168
−
| <br />ENET2-TXD1
+
| ADC-CH0
−
| <br />GPIO4.13
+
| colspan="2" | Dedicated analog input
−
| <br />AJ10
+
| 12-bit ADC, max. 1.8V on input
−
| <br />1.8V power domain
 
 
|-
 
|-
−
| <br />170
+
| 169
−
| <br />CSI2-DATA2_N
+
| GND
−
| <br />-
+
| Power
−
| <br />B22
+
| -
−
| <br />MIPI-CSI  video input channel
+
|  
 
|-
 
|-
−
| <br />171
+
| 170
−
| <br />ENET2-TXD2
+
| GND
−
| <br />GPIO4.14
+
| Power
−
| <br />AH11
+
| -
−
| <br />1.8V power domain
+
|  
 
|-
 
|-
−
| <br />172
+
| 171
−
| <br />CSI2-DATA1_P
+
| DSI-DATA3_P
−
| <br />-
+
| Analog I/O
−
| <br />A24
+
| AH18
−
| <br />MIPI-CSI  video input channel
+
| MIPI-DSI line
 
|-
 
|-
−
| <br />173
+
| 172
−
| <br />ENET2-TXD3
+
| CSI-DATA3_N
−
| <br />GPIO4.15
+
| Analog I/O
−
| <br />AD12
+
| AH11
−
| <br />1.8V power domain
+
| MIPI-CSI line
 
|-
 
|-
−
| <br />174
+
| 173
−
| <br />CSI2-DATA1_N
+
| DSI-DATA3_N
−
| <br />-
+
| Analog I/O
−
| <br />B24
+
| AJ18
−
| <br />MIPI-CSI  video input channel
+
| MIPI-DSI line
 
|-
 
|-
−
| <br />175
+
| 174
−
| <br />ENET2-MDIO
+
| CSI-DATA3_P
−
| <br />GPIO4.05
+
| Analog I/O
−
| <br />AJ8
+
| AJ11
−
| <br />1.8V power domain
+
| MIPI-CSI line
 
|-
 
|-
−
| <br />176
+
| 175
−
| <br />CSI2-DATA0_P
+
| GND
−
| <br />-
+
| Power
−
| <br />A25
+
| -
−
| <br />MIPI-CSI  video input channel
+
|  
 
|-
 
|-
−
| <br />177
+
| 176
−
| <br />ENET2-MDC
+
| GND
−
| <br />GPIO4.04
+
| Power
−
| <br />AH9
+
| -
−
| <br />1.8V power domain
+
|  
 
|-
 
|-
−
| <br />178
+
| 177
−
| <br />CSI2-DATA0_N
+
| DSI-DATA2_P
−
| <br />-
+
| Analog I/O
−
| <br />B25
+
| AH15
−
| <br />MIPI-CSI  video input channel
+
| MIPI-DSI line
 
|-
 
|-
−
| <br />179
+
| 178
−
| <br />ENET2-RST
+
| CSI-DATA2_N
−
| <br />GPIO4.18
+
| Analog I/O
−
| <br />AC12
+
| AH14
−
| <br />1.8V power domain
+
| MIPI-CSI line
 
|-
 
|-
−
| <br />180
+
| 179
−
| <br />GND
+
| DSI-DATA2_N
−
| <br />-
+
| Analog I/O
−
| <br />-
+
| AJ15
−
| <br />
+
| MIPI-DSI line
 
|-
 
|-
−
| <br />181
+
| 180
−
| <br />ENET2-EV1-OUT
+
| CSI-DATA2_P
−
| <br />GPIO4.03
+
| Analog I/O
−
| <br />AF10
+
| AJ14
−
| <br />1.8V power domain
+
| MIPI-CSI line
 
|-
 
|-
−
| <br />182
+
| 181
−
| <br />CSI2-CLK_P
+
| GND
−
| <br />-
+
| Power
−
| <br />A23
+
| -
−
| <br />MIPI-CSI  video input channel
+
|  
 
|-
 
|-
−
| <br />183
+
| 182
−
| <br />ENET2-EV1-IN
+
| GND
−
| <br />GPIO4.02
+
| Power
−
| <br />AC10
+
| -
−
| <br />1.8V power domain
+
|  
 
|-
 
|-
−
| <br />184
+
| 183
−
| <br />CSI2-CLK_N
+
| DSI-CLK_P
−
| <br />-
+
| Analog I/O
−
| <br />B23
+
| AG17
−
| <br />MIPI-CSI  video input channel
+
| MIPI-DSI line
 
|-
 
|-
−
| <br />185
+
| 184
−
| <br />ENET2-EV0-OUT
+
| CSI-CLK_N
−
| <br />GPIO4.01
+
| Analog I/O
−
| <br />AH8
+
| AG12
−
| <br />1.8V power domain
+
| MIPI-CSI line
 
|-
 
|-
−
| <br />186
+
| 185
−
| <br />GND
+
| DSI-CLK_N
−
| <br />-
+
| Analog I/O
−
| <br />-
+
| AG18
−
| <br />
+
| MIPI-DSI line
 
|-
 
|-
−
| <br />187
+
| 186
−
| <br />ENET2-EV0-IN
+
| CSI-CLK_P
−
| <br />GPIO4.00
+
| Analog I/O
−
| <br />AJ9
+
| AG13
−
| <br />1.8V power domain
+
| MIPI-CSI line
 
|-
 
|-
−
| <br />188
+
| 187
−
| <br />CSI1-DATA3_N
+
| GND
−
| <br />-
+
| Power
−
| <br />E26
+
| -
−
| <br />MIPI-CSI  video input channel
+
|  
 
|-
 
|-
−
| <br />189
+
| 188
−
| <br />VDD-1V8
+
| GND
−
| <br />-
+
| Power
−
| <br />-
+
| -
−
| <br />1.8V voltage output for external accesories, load max. 400 mA
+
|  
 
|-
 
|-
−
| <br />190
+
| 189
−
| <br />CSI1-DATA3_P
+
| DSI-DATA1_P
−
| <br />-
+
| Analog I/O
−
| <br />D26
+
| AH17
−
| <br />MIPI-CSI  video input channel
+
| MIPI-DSI line
 
|-
 
|-
−
| <br />191
+
| 190
−
| <br />GND
+
| CSI-DATA1_N
−
| <br />-
+
| Analog I/O
−
| <br />-
+
| AH12
−
| <br />
+
| MIPI-CSI line
 
|-
 
|-
−
| <br />192
+
| 191
−
| <br />CSI1-DATA2_N
+
| DSI-DATA1_N
−
| <br />-
+
| Analog I/O
−
| <br />E24
+
| AJ17
−
| <br />MIPI-CSI  video input channel
+
| MIPI-DSI line
 
|-
 
|-
−
| <br />193
+
| 192
−
| <br />ENET1-INT
+
| CSI-DATA1_P
−
| <br />GPIO4.20
+
| Analog I/O
−
| <br />AE12
+
| AJ12
−
| <br />1.8V power domain
+
| MIPI-CSI line
 
|-
 
|-
−
| <br />194
+
| 193
−
| <br />CSI1-DATA2_P
+
| GND
−
| <br />-
+
| Power
−
| <br />D24
+
| -
−
| <br />MIPI-CSI  video input channel
+
|  
 
|-
 
|-
−
| <br />195
+
| 194
−
| <br />ENET1-RXC
+
| GND
−
| <br />GPIO1.25
+
| Power
−
| <br />AE29
+
| -
−
| <br />1.8V power domain
+
|  
 
|-
 
|-
−
| <br />196
+
| 195
−
| <br />CSI1-DATA1_N
+
| DSI-DATA0_P
−
| <br />-
+
| Analog I/O
−
| <br />E20
+
| AH16
−
| <br />MIPI-CSI  video input channel
+
| MIPI-DSI line
 
|-
 
|-
−
| <br />197
+
| 196
−
| <br />ENET1-RX-CTL
+
| CSI-DATA0_N
−
| <br />GPIO1.24
+
| Analog I/O
−
| <br />AE28
+
| AH13
−
| <br />1.8V power domain
+
| MIPI-CSI line
 
|-
 
|-
−
| <br />198
+
| 197
−
| <br />CSI1-DATA1_P
+
| DSI-DATA0_N
−
| <br />-
+
| Analog I/O
−
| <br />D20
+
| AJ16
−
| <br />MIPI-CSI  video input channel
+
| MIPI-DSI line
 
|-
 
|-
−
| <br />199
+
| 198
−
| <br />ENET1-RXD0
+
| CSI-DATA0_P
−
| <br />GPIO1.26
+
| Analog I/O
−
| <br />AG29
+
| AJ13
−
| <br />1.8V power domain
+
| MIPI-CSI line
 
|-
 
|-
−
| <br />200
+
| 199
−
| <br />CSI1-DATA0_N
+
| GND
−
| <br />-
+
| Power
−
| <br />E18
+
| -
−
| <br />MIPI-CSI  video input channel
+
|  
 
|-
 
|-
−
| <br />201
+
| 200
−
| <br />ENET1-RXD1
+
| GND
−
| <br />GPIO1.27
+
| Power
−
| <br />AG28
+
| -
−
| <br />1.8V power domain
+
|  
 
|-
 
|-
−
| <br />202
+
| -
−
| <br />CSI1-DATA0_P
+
| WLAN-ENABLE
−
| <br />-
+
| P40-2
−
| <br />D18
+
| A17
−
| <br />MIPI-CSI  video input channel
+
| 1DX radio module line  (WiFi)<br />     Not available externally
 
|-
 
|-
−
| <br />203
+
| -
−
| <br />ENET1-RXD2
+
| WLAN-H-WAKE
−
| <br />GPIO1.28
+
| P19-1
−
| <br />AF29
+
| B2
−
| <br />1.8V power domain
+
| 1DX radio module line  (WiFi)<br />     Not available externally
 
|-
 
|-
−
| <br />204
+
| -
−
| <br />GND
+
| SD1-CLK
−
| <br />-
+
| -
−
| <br />-
+
| H3
−
| <br />
+
| 1DX radio module line  (WiFi)<br />     Not available externally
 
|-
 
|-
−
| <br />205
+
| -
−
| <br />ENET1-RXD3
+
| SD1-CMD
−
| <br />GPIO1.29
+
| -
−
| <br />AF28
+
| J2
−
| <br />1.8V power domain
+
| 1DX radio module line  (WiFi)<br />     Not available externally
 
|-
 
|-
−
| <br />206
+
| -
−
| <br />CSI1-CLK_N
+
| SD1-DATA0
−
| <br />-
+
| -
−
| <br />E22
+
| H1
−
| <br />MIPI-CSI  video input channel
+
| 1DX radio module line  (WiFi)<br />     Not available externally
 
|-
 
|-
−
| <br />207
+
| -
−
| <br />GND
+
| SD1-DATA1
−
| <br />-
+
| -
−
| <br />-
+
| H2
−
| <br />
+
| 1DX radio module line  (WiFi)<br />     Not available externally
 
|-
 
|-
−
| <br />208
+
| -
−
| <br />CSI1-CLK_P
+
| SD1-DATA2
−
| <br />-
+
| -
−
| <br />D22
+
| K2
−
| <br />MIPI-CSI  video input channel
+
| 1DX radio module line  (WiFi)<br />     Not available externally
 
|-
 
|-
−
| <br />209
+
| -
−
| <br />ENET1-TXC
+
| SD1-DATA3
−
| <br />GPIO1.23
+
| -
−
| <br />AE24
+
| J1
−
| <br />1.8V power domain
+
| 1DX radio module line  (WiFi)<br />     Not available externally
 
|-
 
|-
−
| <br />210
+
| -
−
| <br />GND
+
| UART2-RXD
−
| <br />-
+
| P48-1
−
| <br />-
+
| B23
−
| <br />
+
| 1DX radio module line  (BLE)<br />     Not available externally
 
|-
 
|-
−
| <br />211
+
| -
−
| <br />ENET1-TX-CTL
+
| UART2-TXD
−
| <br />GPIO1.22
+
| P48-0
−
| <br />AF24
+
| B22
−
| <br />1.8V  power domain
+
| 1DX radio module line  (BLE)<br />     Not available externally
 
|-
 
|-
−
| <br />212
+
| -
−
| <br />DSI-CLK_P
+
| UART2-RTS
−
| <br />-
+
| P48-4
−
| <br />A18
+
| B23
−
| <br />DSI1  video output channel
+
| 1DX radio module line  (BLE)<br />     Not available externally
 
|-
 
|-
−
| <br />213
+
| -
−
| <br />ENET1-TXD0
+
| UART2-CTS
−
| <br />GPIO1.25
+
| P48-3
−
| <br />AC25
+
| C22
−
| <br />1.8V power domain
+
| 1DX radio module line  (BLE)<br />     Not available externally
 
|-
 
|-
−
| <br />214
+
| -
−
| <br />DSI-CLK_N
+
| BT-DEV-WAKE
−
| <br />-
+
| P39-0
−
| <br />B18
+
| A16
−
| <br />DSI1  video output channel
+
| 1DX radio module line  (BLE)<br />     Not available externally
 
|-
 
|-
−
| <br />215
+
| -
−
| <br />ENET1-TXD1
+
| BT-HOST-WAKE
−
| <br />GPIO1.20
+
| P39-1
−
| <br />AE26
+
| C15
−
| <br />1.8V power domain
+
| 1DX radio module line  (BLE)<br />     Not available externally
 
|-
 
|-
−
| <br />216
+
| -
−
| <br />GND
+
| BT-REG-ON
−
| <br />-
+
| P39-3
−
| <br />-
+
| B16
−
| <br />
+
| 1DX radio module line  (BLE)<br />     Not available externally
 
|-
 
|-
−
| <br />217
+
| -
−
| <br />ENET1-TXD2
+
| JTAG-TMS
−
| <br />GPIO1.19
+
|  
−
| <br />AF26
+
| AD2
−
| <br />1.8V power domain
+
| JTAG interface<br />     1.8V Power Domain
 
|-
 
|-
−
| <br />218
+
| -
−
| <br />DSI-DATA0_P
+
| JTAG-TCK
−
| <br />-
+
|  
−
| <br />A16
+
| AE1
−
| <br />DSI1  video output channel
+
| JTAG interface<br />     1.8V Power Domain
 
|-
 
|-
−
| <br />219
+
| -
−
| <br />ENET1-TXD3
+
| JTAG-TDO
−
| <br />GPIO1.18
+
|  
−
| <br />AD24
+
| AE2
−
| <br />1.8V power domain
+
| JTAG interface<br />     1.8V Power Domain
 
|-
 
|-
−
| <br />220
+
| -
−
| <br />DSI-DATA0_N
+
| JTAG-TDI
−
| <br />-
+
|  
−
| <br />B16
+
| AF1
−
| <br />DSI1  video output channel
+
| JTAG interface<br />     1.8V Power Domain
 
|-
 
|-
−
| <br />221
+
| -
−
| <br />ENET1-MDIO
+
| JTAG-TRST
−
| <br />GPIO1.17
+
|  
−
| <br />AH29
+
| AF2
−
| <br />1.8V power domain
+
| JTAG interface<br />     1.8V Power Domain
 
|-
 
|-
−
| <br />222
+
| -
−
| <br />DSI-DATA1_P
+
| QSPI-CLK
−
| <br />-
+
|  
−
| <br />A17
+
| C4
−
| <br />DSI1   video output channel
+
| Optional on-board QSPI Flash   (W25Q128FWPIG)
 
|-
 
|-
−
| <br />223
+
| -
−
| <br />ENET1-MDC
+
| QSPI-IO0
−
| <br />GPIO1.16
+
|  
−
| <br />AH28
+
| A3
−
| <br />1.8V power domain
+
| Optional on-board QSPI Flash  (W25Q128FWPIG)
 
|-
 
|-
−
| <br />224
+
| -
−
| <br />DSI-DATA1_N
+
| QSPI-IO1
−
| <br />-
+
|  
−
| <br />B17
+
| B3
−
| <br />DSI1   video output channel
+
| Optional on-board QSPI Flash   (W25Q128FWPIG)
 
|-
 
|-
−
| <br />225
+
| -
−
| <br />ENET1-RST
+
| QSPI-IO2
−
| <br />
+
|  
−
| <br />T28
+
| A4
−
| <br />1.8V power domain
+
| Optional on-board QSPI Flash  (W25Q128FWPIG)
 
|-
 
|-
−
| <br />226
+
| -
−
| <br />DSI-DATA2_P
+
| QSPI-IO3
−
| <br />-
+
|  
−
| <br />A19
+
| B4
−
| <br />DSI1   video output channel
+
| Optional on-board QSPI Flash   (W25Q128FWPIG)
 
|-
 
|-
−
| <br />227
+
| -
−
| <br />GPIO3.24
+
| QSPI-SS
−
| <br />-
+
|
−
| <br />AE14
+
| A2
−
| <br />1.8V power domain
+
| Optional on-board QSPI Flash  (W25Q128FWPIG)
 +
|}
 +
 
 +
== JTAG Connector ==
 +
[[File:VisionSOM-x2L-JTAG-Connector.jpg|650px|center]]
 +
 
 +
{| class="wikitable"
 
|-
 
|-
−
| <br />228
+
! Connector pin number
−
| <br />DSI-DATA2_N
+
! Default function
−
| <br />-
+
! GPIO
−
| <br />B19
+
! BGA456 ball
−
| <br />DSI1  video output channel
+
! Notes
 
|-
 
|-
−
| <br />229
+
| JTAG-CONN-1
−
| <br />GPIO3.23
+
| VDD-1V8
−
| <br />-
+
| -
−
| <br />AF16
+
| -
−
| <br />1.8V power domain
+
|  
 
|-
 
|-
−
| <br />230
+
| JTAG-CONN-2
−
| <br />DSI-DATA3_P
+
| TMS (SWDIO)
−
| <br />-
+
| -
−
| <br />A20
+
| AD2
−
| <br />DSI1  video output channel
+
| 10kOhm pull-up
 
|-
 
|-
−
| <br />231
+
| JTAG-CONN-3
−
| <br />GPIO3.22
+
| TCK (SWDCLK)
−
| <br />-
+
| -
−
| <br />AD16
+
| AE1
−
| <br />1.8V power domain
+
| 10kOhm pull-up
 
|-
 
|-
−
| <br />232
+
| JTAG-CONN-4
−
| <br />DSI-DATA3_N
+
| TDO
−
| <br />-
+
| -
−
| <br />B20
+
| AE2
−
| <br />DSI1  video output channel
+
| 10kOhm pull-up
 
|-
 
|-
−
| <br />233
+
| JTAG-CONN-5
−
| <br />NC
+
| TDI
−
| <br />-
+
| -
−
| <br />-
+
| AF1
−
| <br />
+
| 10kOhm pull-up
 
|-
 
|-
−
| <br />234
+
| JTAG-CONN-6
−
| <br />GND
+
| TRST
−
| <br />-
+
| -
−
| <br />-
+
| AF2
−
| <br />
+
| 10kOhm pull-up
 
|-
 
|-
−
| <br />235
+
| JTAG-CONN-7
−
| <br />NC
+
| DEBUG EN
−
| <br />-
+
| -
−
| <br />-
+
| AE18
−
| <br />
+
| 10kOhm pull-down
 
|-
 
|-
−
| <br />236
+
| JTAG-CONN-8
−
| <br />NC
+
| GND
−
| <br />-
+
| -
−
| <br />-
+
| -
−
| <br />
+
| -
−
|-
 
−
| <br />237
 
−
| <br />NC
 
−
| <br />-
 
−
| <br />-
 
−
| <br />
 
−
|-
 
−
| <br />238
 
−
| <br />NC
 
−
| <br />-
 
−
| <br />-
 
−
| <br />
 
−
|-
 
−
| <br />239
 
−
| <br />GND
 
−
| <br />-
 
−
| <br />-
 
−
| <br />
 
−
|-
 
−
| <br />240
 
−
| <br />PWR-ON
 
−
| <br />-
 
−
| <br />G22
 
−
| <br />ONOFF MPU input<br />  <br />1.8V power domain
 
−
|-
 
−
| <br />241
 
−
| <br />I2C6-SCL
 
−
| <br />GPIO3.19
 
−
| <br />AC14
 
−
| <br />I2C6  is used to communication with PMIC PCA9450CHN with internal 1V8 pull-ups. <br />  <br />Externally  compatible with 3.3V logic standards.
 
−
|-
 
−
| <br />242
 
−
| <br />SYS-RST
 
−
| <br />-
 
−
| <br />J29
 
−
| <br />Buffered,  open-drain POR-B output
 
−
|-
 
−
| <br />243
 
−
| <br />I2C6-SDA
 
−
| <br />GPIO3.20
 
−
| <br />AD14
 
−
| <br />I2C6  is used to communication with PMIC PCA9450CHN with internal 1V8 pull-ups. <br />  <br />Externally  compatible with 3.3V logic standards.
 
−
|-
 
−
| <br />244
 
−
| <br />RST-IN
 
−
| <br />-
 
−
| <br />-
 
−
| <br />PMIC_RST_B  input (system reset generated by PMIC)
 
−
|-
 
−
| <br />245
 
−
| <br />VDD5V
 
−
| <br />-
 
−
| <br />-
 
−
| <br />External  5V input
 
−
|-
 
−
| <br />246
 
−
| <br />GND
 
−
| <br />-
 
−
| <br />-
 
−
| <br />
 
−
|-
 
−
| <br />247
 
−
| <br />VDD5V
 
−
| <br />-
 
−
| <br />-
 
−
| <br />External  5V input
 
−
|-
 
−
| <br />248
 
−
| <br />GND
 
−
| <br />-
 
−
| <br />-
 
−
| <br />
 
−
|-
 
−
| <br />249
 
−
| <br />VDD5V
 
−
| <br />-
 
−
| <br />-
 
−
| <br />External  5V input
 
−
|-
 
−
| <br />250
 
−
| <br />GND
 
−
| <br />-
 
−
| <br />-
 
−
| <br />
 
−
|-
 
−
| <br />251
 
−
| <br />VDD5V
 
−
| <br />-
 
−
| <br />-
 
−
| <br />External  5V input
 
−
|-
 
−
| <br />252
 
−
| <br />GND
 
−
| <br />-
 
−
| <br />-
 
−
| <br />
 
−
|-
 
−
| <br />253
 
−
| <br />VDD5V
 
−
| <br />-
 
−
| <br />-
 
−
| <br />External  5V input
 
−
|-
 
−
| <br />254
 
−
| <br />GND
 
−
| <br />-
 
−
| <br />-
 
−
| <br />
 
−
|-
 
−
| <br />255
 
−
| <br />VDD5V
 
−
| <br />-
 
−
| <br />-
 
−
| <br />External  5V input
 
−
|-
 
−
| <br />256
 
−
| <br />GND
 
−
| <br />-
 
−
| <br />-
 
−
| <br />
 
−
|-
 
−
| <br />257
 
−
| <br />VDD5V
 
−
| <br />-
 
−
| <br />-
 
−
| <br />External  5V input
 
−
|-
 
−
| <br />258
 
−
| <br />GND
 
−
| <br />-
 
−
| <br />-
 
−
| <br />
 
−
|-
 
−
| <br />259
 
−
| <br />VDD5V
 
−
| <br />-
 
−
| <br />-
 
−
| <br />External  5V input
 
−
|-
 
−
| <br />260
 
−
| <br />GND
 
−
| <br />-
 
−
| <br />-
 
−
| <br />
 
−
|-
 
−
| <br />-
 
−
| <br />PMIC-INT
 
−
| <br />GPIO3.25
 
−
| <br />AF14
 
−
| <br />Interrupt  line connected to IRQ_B PMIC PCA9450CHN
 
−
|-
 
−
| <br />-
 
−
| <br />SDIO-VSELECT
 
−
| <br />GPIO3.21
 
−
| <br />AE16
 
−
| <br />Control  line for SDIO1 power supply voltage (LDO5 in PMIC PCA9450CHN, SDIO-VSELECT)
 
−
|-
 
−
| <br />-
 
−
| <br />GPIO1.02
 
−
| <br />-
 
−
| <br />B6
 
−
| <br />WDOG-B
 
−
|-
 
−
| <br />-
 
−
| <br />BT-CTS
 
−
| <br />-
 
−
| <br />AJ14
 
−
| <br />1ZM  Bluetooth module line (UART1)
 
−
|-
 
−
| <br />-
 
−
| <br />BT-TXD
 
−
| <br />-
 
−
| <br />AH17
 
−
| <br />1ZM  Bluetooth module line (UART1)
 
−
|-
 
−
| <br />-
 
−
| <br />BT-RTS
 
−
| <br />-
 
−
| <br />AJ17
 
−
| <br />1ZM  Bluetooth module line (UART1)
 
−
|-
 
−
| <br />-
 
−
| <br />BT-RXD
 
−
| <br />-
 
−
| <br />AJ16
 
−
| <br />1ZM  Bluetooth module line (UART1)
 
−
|-
 
−
| <br />-
 
−
| <br />BT-H-WAKE
 
−
| <br />GPIO2.20
 
−
| <br />AC26
 
−
| <br />1ZM  Bluetooth module line
 
−
|-
 
−
| <br />-
 
−
| <br />NAND_D0
 
−
| <br />QSPI-D0
 
−
| <br />R25
 
−
| <br />Connection  for optional QSPI NOR Flash
 
−
|-
 
−
| <br />-
 
−
| <br />NAND_D1
 
−
| <br />QSPI-D1
 
−
| <br />L25
 
−
| <br />Connection  for optional QSPI NOR Flash
 
−
|-
 
−
| <br />-
 
−
| <br />NAND_D2
 
−
| <br />QSPI-D2
 
−
| <br />L24
 
−
| <br />Connection  for optional QSPI NOR Flash
 
−
|-
 
−
| <br />-
 
−
| <br />NAND_D3
 
−
| <br />QSPI-D3
 
−
| <br />N24
 
−
| <br />Connection  for optional QSPI NOR Flash
 
−
|-
 
−
| <br />-
 
−
| <br />NAND_ALE
 
−
| <br />QSPI-CLK
 
−
| <br />N25
 
−
| <br />Connection  for optional QSPI NOR Flash
 
−
|-
 
−
| <br />-
 
−
| <br />NAND_CE0_B
 
−
| <br />QSPI-CS
 
−
| <br />L26
 
−
| <br />Connection  for optional QSPI NOR Flash
 
−
|-
 
−
| <br />-
 
−
| <br />WLAN-H-WAKE
 
−
| <br />GPIO2.19
 
−
| <br />AD28
 
−
| <br />1ZM  WiFi module line
 
−
|-
 
−
| <br />-
 
−
| <br />WLAN-ENABLE
 
−
| <br />GPIO2.12
 
−
| <br />AD29
 
−
| <br />1ZM  WiFi module line
 
 
|}
 
|}
  
 
== Dimensions ==
 
== Dimensions ==
−
[[File:SpaceSOM-8Mplus-dimensions.png|650px|center]]
+
[[File:visionsom-x2l-dimensions.png|650px|center]]

Latest revision as of 11:14, 4 January 2024

VisionSOM-V2L Datasheet and Pinout

General description

VisionSOM-V2L intro.jpg

The VisionSOM-V2L family is a SODIMM-sized SoM based on the Renesas dual core RZ/V2L application processor which features an advanced implementation of DRP-AI (ML+AI) coprocessor. The VisionSOM-V2L family offers energy efficient dual ARM Cortex-A55 cores (at speed up to 1.2GHz) and ARM Cortex-M33 core (at speed up to 200MHz) as well as a 3D Graphics Processing Unit (ARM Mali-G31 GPU @500MHz, 1920x1080 @60fps) with Open GL 3.2ES/OpenCL 2.0 (Full Profile) capabilities and Video Codec Processor (VCP) with 1920x1080 @30fps.

The VisionSOM-V2L is a multimedia and video oriented, highly integrated SoM (System on Module) featuring high computation power, optinally integrated 2.4GHz Wi-Fi and Bluetooth v5.1 connectivity. The option of integrated, fully certified Wi-Fi and Bluetooth module simplifies the carrier board design and is ideally suited for wireless application. The VisionSOM-V2L provides a variety memory configuration, including 1GB of fast and efficient DDR4 and eMMC Flash that meets our customers requirements.

The SoM supports connections to a variety of interfaces: two high-speed USB 2.0 with integrated PHY, dual Ethernet 1Gbit, audio, MIPI-DSI display output with optional touch panel, MIPI-CSI camera input with scaling processor, serial communication interfaces including 2xCAN. In addition, the system supports industrial grade embedded applications.

SoMLabs also provides a complete hardware and software development board for the SoM in the form of a carrier board and optional TFT display and touch panel.


Applications

  • IoT Edge Devices
  • IoT gateways
  • Machine vision equipment
  • AI+ML Decision/Recognition Systems
  • Robotics
  • Human-machine Interfaces (HMI)
  • IP Cameras
  • Home Appliances
  • Home Automation – Smart Home
  • Residential gateways
  • Industrial embedded Linux computer
  • Fitness/outdoor equipment

Features

  • Powered by dual core Renesas RZ/V2L application processor (R9A07G054L27GBG)
  • Dual ARM Cortex-A55 core at speed up to 1.2GHz
  • ARM Cortex-M33 core at speed up to 200MHz
  • Integrated Machine-Learning (ML) and Artificial Intelligence (AI) AI Accelerator (DRP-AI)
  • Integrated 3D GPU (ARM Mali-G31 @500MHz)
  • 1GB RAM (DDR4)
  • Up to 32GB eMMC memory
  • Optional Murata radio module 2.4GHz Wi-Fi and Bluetooth v5.1
  • Built-in dual USB 2.0 interface
  • Built-in 2xCAN-FD interfaces
  • Built-in MIPI-DSI display interface
  • Built-in MIPI-CSI camera interface
  • Power-efficient and cost-optimized solution
  • Ideal for industrial IoT and embedded applications
  • Integrated security features

Pictures of SOM versions

Version Photo
eMMC
VisionSOM-x2L-eMMC-top.png
VisionSOM-x2L-eMMC-bottom.png
WiFi/BT module is available for all memory configurations.

Ordering info

SLS22CpuType_Clock_RamSize_FlashSize_SF_TEMP
SLSProduct type
SLS - System on Module
2SOM Name
2 - High Performance VisionSOM SODIM200 module
2CPU Family
2 - Renesas RZ/V2L family
CpuTypeCPU Type
RV2LDC - RZ/V2L dual Cortex-A55 + Cortex-M33 + DRP-AI
ClockCPU Clock Speed
1200C - 1.2GHz
RamSizeDDR4 RAM Size
01GR - 1GB (1024MB)
FlashSizeeMMC Memory Size
04GE - 4GB eMMC
08GE - 8GB eMMC
16GE - 16GB eMMC
32GE - 32GB eMMC
SFSpecial Features
0SF - No Special Features
1WB - Built-in 2.4GHz Wi-Fi and Bluetooth v5.1
TEMPOperating Temperature
E - Extended: -25 to +70 C
I - Industrial: -40 to +85 C

Block Diagram

VisionSOM-V2L-blokowy.png

Operating ranges

Parameter Value Unit Comment
Power Supply
5.0
V
 Connected to VDD-5V0 SODIM200 pins
Max. input GPIO voltage
3.3
V
 In 3.3V power domain
Max. input GPIO voltage
1.8
V
 In 1.8V power domain
Environment temperature
-40…+85
 oC Industrial range w/o WiFi module
-25…+70
 Industrial range with WiFi module
0…+70
 Consumer range

Electrical parameters

SOM
signal name 		Parameter Value Unit
Min. Typ. Max.
VDD-5V Supply Voltage (Input) 4.0 5.0 5.5 V
VDD-1V8 Output power supply for external 1.8V accesories - - 0.31 A
VDD-3V3 Output power supply for external 3.3V accesories - - 0.32 A
VGPIO @1V8 GPIO Input Voltage 0 - 2.05 V
VGPIO @3V3 GPIO Input Voltage 0 - 3.62 V
VUSB0-VBUS USB VBUS Input Voltage 0 - 5.253 V
VETH0 I/O voltage for Ethernet 0 0 - 1.8 V
VETH1 I/O voltage for Ethernet 1 0 - 1.8 or 3.34 V
VJTAG I/O voltage for Ethernet 1 0 - 1.85 V
VADC-IN Input voltage for ADC-CHx6 0 - 1.8 V

Notes:
1. Total current on both VDD-1V8 outputs.
1. Total current on both VDD-3V3 outputs.
3. Input current is limited by 1+1,8kOhm resistors (voltage divider) connected in series.
4. Depends on logic state on ET1-VDD-SEL (ET1-VDD-SEL='0' -> V=1.8V, ET1-VDD-SEL='1' or left open -> V=3.3V, internally pull-up'ed.).
5. JTAG/SWD interface lines are 1.8V compatible.
6. "x" means 0...7.

SoM pinout

Important notes:
1. Detail pin configurations description you can find, edit and arrange in dedicated SCFG file (with free "Smart Configurator" tool).
2. On-board eMMC memory is connected to SDIO0 interface.
3. Optional on-board QSPI Flash memory is connected to QSPI0 interface.
4. SDIO1 interface is used to communication with Murata 1DX radio module.
5. UART2 is used to communication with BT-BLE interatted with Murata 1DX radio module.
6. I2C3 is used to communication with on-board PMIC.


SOM pin number Default function GPIO BGA456 ball Notes
1 GND Power -
2 GND Power -
3 ET0-PHY-RST P47-1 A20 1.8V Power Domain
GPIO mode not allowed
4 PWR-GOOD Output PMIC power-good signalling for external devices
5 ET0-INT P47-0 B20 3.3V Power Domain
6 PWR-ON Input PMIC PWRON input (on-off function)
Internal pull-down
Connect to GND if not used
Connect to VDD-3V3 with external pull-up resistor (4.7kOhm) and pushbutton to GND if used
7 ET0-MDIO I/O U1 1.8V Power Domain
GPIO mode not allowed
8 PWR-FAIL Input PMIC enable-input:
PWR-FAIL='0' -> SOM power supply is off
PWR-FAIL='1' or left open -> SOM power supply is on
Can bue used as cold-reset input (active low)
9 ET0-MDC I/O U2 1.8V Power Domain
GPIO mode not allowed
10 RESET-OUT Output RESET output for external peripherals
11 GND Power -
12 RESET-IN Input MPU reset input, active low
13 ET0-RXC I/O P2 1.8V Power Domain
GPIO mode not allowed
14 GND Power -
15 ET0-RX-CTL I/O P1 1.8V Power Domain
GPIO mode not allowed
16 UART0-RXD P38-1 B15 3.3V Power Domain
17 ET0-RXD0 I/O R2 1.8V Power Domain
GPIO mode not allowed
18 UART0-TXD P38-0 A15 3.3V Power Domain
19 ET0-RXD1 I/O R1 1.8V Power Domain
GPIO mode not allowed
20 UART1-CTS P41-0 E17 3.3V Power Domain
21 ET0-RXD2 I/O T2 1.8V Power Domain
GPIO mode not allowed
22 UART1-RTS P41-1 A18 3.3V Power Domain
23 ET0-RXD3 I/O T1 1.8V Power Domain
GPIO mode not allowed
24 UART1-RXD P40-0 C17 3.3V Power Domain
25 GND Power -
26 UART1-TXD P40-1 B17 3.3V Power Domain
27 ET0-TX-CTL I/O N2 1.8V Power Domain
GPIO mode not allowed
28 UART4-RXD P2-1 A13 3.3V Power Domain
29 ET0-TXC I/O N1 1.8V Power Domain
GPIO mode not allowed
30 UART4-TXD P2-0 B13 3.3V Power Domain
31 ET0-TXD3 I/O N1 1.8V Power Domain
GPIO mode not allowed
32 UART3-RXD P0-1 B12 3.3V Power Domain
33 ET0-TXD2 I/O L2 1.8V Power Domain
GPIO mode not allowed
34 UART3-TXD P0-0 A11 3.3V Power Domain
35 ET0-TXD1 I/O M2 1.8V Power Domain
GPIO mode not allowed
36 VBAT-RTC Power - RTC 3V battery
37 ET0-TXD0 I/O M1 1.8V Power Domain
GPIO mode not allowed
38 GND Power -
39 VDD-1V8 Power 1.8V output for external devices, max. 300 mA
40 VDD-1V8 Power 1.8V output for external devices, max. 300 mA
41 VDD-5V0 Power External power supply
42 VDD-5V0 Power External power supply
43 VDD-5V0 Power External power supply
44 VDD-5V0 Power External power supply
45 VDD-5V0 Power External power supply
46 VDD-5V0 Power External power supply
47 VDD-5V0 Power External power supply
48 VDD-5V0 Power External power supply
49 VDD-5V0 Power External power supply
50 VDD-5V0 Power External power supply
51 NC Not Connected -
52 NC Not Connected -
53 VDD-3V3 Power 3.3V output for external devices, max. 300mA
54 VDD-3V3 Power - 3.3V output for external devices, max. 300mA
55 GND Power -
56 SYSLED P42-0 AG4 3.3V Power Domain
57 VPROG NC - For SoMLabs purposes only, leave unconnected
58 GND Power -
59 BOOT-RECOVERY Input BOOT input, active low during reset
60 SSI-MCLK AUDIO_CLK1 E12 -
61 GND Power -
62 SSI0-RXD P7-1 AH28 3.3V Power Domain
63 ET1-VDD-SEL Input Ethernet 1 (ET1) interface voltage selection:
ET1-VDD-SEL='0' -> V=1.8V
ET1-VDD-SEL='1' or left open -> V=3.3V
The line has internal pull-up.
64 SSI0-TXD P7-0 AJ28 3.3V Power Domain
65 ET1-PHY-RST P47-3 B21 3.3V Power Domain
66 SSI0-RCK P6-1 AH27 3.3V Power Domain
67 ET1-INT P47-2 A21 3.3V Power Domain
68 SSI0-BCK P6-0 AJ27 3.3V Power Domain
69 ET1-MDIO P37-1 W1 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
70 GND Power -
71 ET1-MDC P37-0 W2 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
72 CAN1-RX P13-0 AF23 3.3V Power Domain
73 GND Power -
74 CAN1-TX P12-1 AE23 3.3V Power Domain
75 ET1-RXC P33-1 AC1 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
76 CAN0-RX P42-2 AJ3 3.3V Power Domain
77 ET1-RX-CTL P34-0 AC2 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
78 CAN0-TX P42-1 AE7 3.3V Power Domain
79 ET1-RXD0 P34-1 AC3 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
80 GND Power -
81 ET1-RXD1 P35-0 AC4 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
82 I2C3-SCL-EXT P46-3 D13 I2C interface used for on-board PMIC configuration
Built-in pull-up resistor 2.2kOhm connected to 3.3V
3.3V Power Domain
83 ET1-RXD2 P35-1 AB4 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
84 I2C3-SDA-EXT P46-2 C12 I2C interface used for on-board PMIC configuration
Built-in pull-up resistor 2.2kOhm connected to 3.3V
3.3V Power Domain
85 ET1-RXD3 P36-0 AB3 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
86 I2C2-SCL P42-4 AC5 Built-in pull-up resistor 2.2kOhm connected to 3.3V
87 GND Power -
88 I2C2-SDA P42-3 AH3 Built-in pull-up resistor 2.2kOhm connected to 3.3V
89 ET1-TX-CTL P29-1 Y1 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
90 P19-0 P19-0 B1 3.3V Power Domain
91 ET1-TXC P29-0 AB2 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
92 P18-0 P18-0 C2 3.3V Power Domain
93 ET1-TXD3 P31-1 Y2 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
94 GND Power -
95 ET1-TXD2 P31-0 AA1 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
96 P18-1 P18-1 D3 3.3V Power Domain
97 ET1-TXD1 P30-1 AA2 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
98 P45-0 P45-0 A8 3.3V Power Domain
99 ET1-TXD0 P30-0 AB1 1.8V or 3.3V Power Domain selected by ET1-VDD-SEL
GPIO allowed only for 3.3V.
100 P45-2 P45-2 A9 3.3V Power Domain
101 GND Power -
102 P45-3 P45-3 B9 3.3V Power Domain
103 USB1-D_N Analog I/O -
104 P46-0 P46-0 B10 3.3V Power Domain
105 USB1-D_P Analog I/O -
106 P46-1 P46-1 A10 3.3V Power Domain
107 USB1-OC P8-1 AJ20 3.3V Power Domain
108 P45-1 P45-1 D12 3.3V Power Domain
109 USB1-EN P8-0 AH19 3.3V Power Domain
110 P1-1 P1-1 A12 3.3V Power Domain
111 GND Power -
112 P3-1 P3-1 B14 3.3V Power Domain
113 USB0-OC P5-0 AJ4 3.3V Power Domain
114 P1-0 P1-0 C13 3.3V Power Domain
115 USB0-EN P4-0 AJ5 3.3V Power Domain
116 GND Power -
117 USB0-ID P5-1 AH4 3.3V Power Domain
118 P3-0 P3-0 A14 3.3V Power Domain
119 USB0-D_N Analog I/O -
120 P48-2 P48-2 A22 3.3V Power Domain
121 USB0-D_P Analog I/O -
122 P4-1 P4-1 AH6 3.3V Power Domain
123 USB0-VBUS Dedicated input AH10 3.3V Power Domain
124 P7-2 P7-2 AJ19 3.3V Power Domain
125 GND Power -
126 GND Power -
127 P11-1 P11-1 AF22 3.3V Power Domain
128 P11-0 P11-0 AG22 3.3V Power Domain
129 P8-2 P8-2 AH20 3.3V Power Domain
130 P12-0 P12-0 AE22 3.3V Power Domain
131 P9-1 P9-1 AH21 3.3V Power Domain
132 P13-1 P13-1 AG23 3.3V Power Domain
133 P9-0 P9-0 AJ21 3.3V Power Domain
134 SPI1-SSL P44-3 B19 3.3V Power Domain
135 SPI0-SSL P43-3 B19 3.3V Power Domain
136 SPI1-MISO P44-2 D18 3.3V Power Domain
137 SPI0-MISO P43-2 E18 3.3V Power Domain
138 SPI1-MOSI P44-1 F17 3.3V Power Domain
139 SPI0-MOSI P43-1 D17 3.3V Power Domain
140 SPI1-CLK P44-0 A19 3.3V Power Domain
141 SPI0-CLK P43-0 B18 3.3V Power Domain
142 GND Power -
143 GND Power -
144 I2C1-SCL Dedicated I2C line C23 RIIC1_SCL
Built-in pull-up resistor 2.2kOhm connected to 3.3V
145 P14-0 P14-0 AF27 3.3V Power Domain
146 I2C1-SDA Dedicated I2C line A24 RIIC1_SDA
Built-in pull-up resistor 2.2kOhm connected to 3.3V
147 P10-1 P10-1 AH22 3.3V Power Domain
148 I2C0-SCL Dedicated I2C line B24 RIIC0_SCL
Built-in pull-up resistor 2.2kOhm connected to 3.3V
149 P10-0 P10-0 AJ22 3.3V Power Domain
150 I2C0-SDA Dedicated I2C line A25 RIIC0_SDA
Built-in pull-up resistor 2.2kOhm connected to 3.3V
151 P15-0 P15-0 AH23 3.3V Power Domain
152 GND Power -
153 P14-1 P14-1 AJ23 3.3V Power Domain
154 ADC-CH7 Dedicated analog input 12-bit ADC, max. 1.8V on input
155 P16-0 P16-0 AH24 3.3V Power Domain
156 ADC-CH6 Dedicated analog input 12-bit ADC, max. 1.8V on input
157 P15-1 P15-1 AJ24 3.3V Power Domain
158 ADC-CH5 Dedicated analog input 12-bit ADC, max. 1.8V on input
159 P17-0 P17-0 AH25 3.3V Power Domain
160 ADC-CH4 Dedicated analog input 12-bit ADC, max. 1.8V on input
160 SSI-MCLK AUDIO-CLK E12 Reference clock output (for audio codec)
161 P16-1 P16-1 AJ25 3.3V Power Domain
162 ADC-CH3 Dedicated analog input 12-bit ADC, max. 1.8V on input
163 P17-2 P17-2 AH26 3.3V Power Domain
164 ADC-CH2 Dedicated analog input 12-bit ADC, max. 1.8V on input
165 P17-1 P17-1 AJ26 3.3V Power Domain
166 ADC-CH1 Dedicated analog input 12-bit ADC, max. 1.8V on input
167 P13-2 P13-2 AG26 3.3V Power Domain
168 ADC-CH0 Dedicated analog input 12-bit ADC, max. 1.8V on input
169 GND Power -
170 GND Power -
171 DSI-DATA3_P Analog I/O AH18 MIPI-DSI line
172 CSI-DATA3_N Analog I/O AH11 MIPI-CSI line
173 DSI-DATA3_N Analog I/O AJ18 MIPI-DSI line
174 CSI-DATA3_P Analog I/O AJ11 MIPI-CSI line
175 GND Power -
176 GND Power -
177 DSI-DATA2_P Analog I/O AH15 MIPI-DSI line
178 CSI-DATA2_N Analog I/O AH14 MIPI-CSI line
179 DSI-DATA2_N Analog I/O AJ15 MIPI-DSI line
180 CSI-DATA2_P Analog I/O AJ14 MIPI-CSI line
181 GND Power -
182 GND Power -
183 DSI-CLK_P Analog I/O AG17 MIPI-DSI line
184 CSI-CLK_N Analog I/O AG12 MIPI-CSI line
185 DSI-CLK_N Analog I/O AG18 MIPI-DSI line
186 CSI-CLK_P Analog I/O AG13 MIPI-CSI line
187 GND Power -
188 GND Power -
189 DSI-DATA1_P Analog I/O AH17 MIPI-DSI line
190 CSI-DATA1_N Analog I/O AH12 MIPI-CSI line
191 DSI-DATA1_N Analog I/O AJ17 MIPI-DSI line
192 CSI-DATA1_P Analog I/O AJ12 MIPI-CSI line
193 GND Power -
194 GND Power -
195 DSI-DATA0_P Analog I/O AH16 MIPI-DSI line
196 CSI-DATA0_N Analog I/O AH13 MIPI-CSI line
197 DSI-DATA0_N Analog I/O AJ16 MIPI-DSI line
198 CSI-DATA0_P Analog I/O AJ13 MIPI-CSI line
199 GND Power -
200 GND Power -
- WLAN-ENABLE P40-2 A17 1DX radio module line (WiFi)
Not available externally
- WLAN-H-WAKE P19-1 B2 1DX radio module line (WiFi)
Not available externally
- SD1-CLK - H3 1DX radio module line (WiFi)
Not available externally
- SD1-CMD - J2 1DX radio module line (WiFi)
Not available externally
- SD1-DATA0 - H1 1DX radio module line (WiFi)
Not available externally
- SD1-DATA1 - H2 1DX radio module line (WiFi)
Not available externally
- SD1-DATA2 - K2 1DX radio module line (WiFi)
Not available externally
- SD1-DATA3 - J1 1DX radio module line (WiFi)
Not available externally
- UART2-RXD P48-1 B23 1DX radio module line (BLE)
Not available externally
- UART2-TXD P48-0 B22 1DX radio module line (BLE)
Not available externally
- UART2-RTS P48-4 B23 1DX radio module line (BLE)
Not available externally
- UART2-CTS P48-3 C22 1DX radio module line (BLE)
Not available externally
- BT-DEV-WAKE P39-0 A16 1DX radio module line (BLE)
Not available externally
- BT-HOST-WAKE P39-1 C15 1DX radio module line (BLE)
Not available externally
- BT-REG-ON P39-3 B16 1DX radio module line (BLE)
Not available externally
- JTAG-TMS AD2 JTAG interface
1.8V Power Domain
- JTAG-TCK AE1 JTAG interface
1.8V Power Domain
- JTAG-TDO AE2 JTAG interface
1.8V Power Domain
- JTAG-TDI AF1 JTAG interface
1.8V Power Domain
- JTAG-TRST AF2 JTAG interface
1.8V Power Domain
- QSPI-CLK C4 Optional on-board QSPI Flash (W25Q128FWPIG)
- QSPI-IO0 A3 Optional on-board QSPI Flash (W25Q128FWPIG)
- QSPI-IO1 B3 Optional on-board QSPI Flash (W25Q128FWPIG)
- QSPI-IO2 A4 Optional on-board QSPI Flash (W25Q128FWPIG)
- QSPI-IO3 B4 Optional on-board QSPI Flash (W25Q128FWPIG)
- QSPI-SS A2 Optional on-board QSPI Flash (W25Q128FWPIG)

JTAG Connector

VisionSOM-x2L-JTAG-Connector.jpg
Connector pin number Default function GPIO BGA456 ball Notes
JTAG-CONN-1 VDD-1V8 - -
JTAG-CONN-2 TMS (SWDIO) - AD2 10kOhm pull-up
JTAG-CONN-3 TCK (SWDCLK) - AE1 10kOhm pull-up
JTAG-CONN-4 TDO - AE2 10kOhm pull-up
JTAG-CONN-5 TDI - AF1 10kOhm pull-up
JTAG-CONN-6 TRST - AF2 10kOhm pull-up
JTAG-CONN-7 DEBUG EN - AE18 10kOhm pull-down
JTAG-CONN-8 GND - - -

Dimensions

Visionsom-x2l-dimensions.png
Retrieved from "https://wiki.somlabs.com/index.php?title=VisionSOM-V2L_Datasheet_and_Pinout&oldid=3768"
NXP Partner ST Partner Renesas Partner