Personal tools

SL-MIPI-CSI-OV5640 Datasheet and Pinout

From SomLabs Wiki

Jump to: navigation, search

SL-MIPI-CSI-OV5640 5Mpx camera module with MIPI-CSI interface and OV5640 video sensor Datasheet and Pinout


General description

SL-MIPI-CSI-OV5640-1.png


SL-MIPI-CSI-OV5640 is the 5 Mpx color camera module. Module is equipped with MIPI-CSI interface and FPC30 connector therefore SL-MIPI-CSI-OV5640 module is matched to the SoMLabs carrier boards.
The SL-MIPI-CSI-OV5640 is equipped with OV5640 hi-res HD 5 Mpx CMOS video sensor. Video interface is dual lane MIPI-CSI interface and module supports electronic shutter mode: rolling shutter/frame exposure.
As a result of using advanced PMIC – SL1 – developed by SoMLabs, the SL-MIPI-CSI-OV5640 module is powered from single +3.3V line available in FPC connector.
The SL-MIPI-CSI-OV5640 is fully compatible with SoMLabs carrier boards equipped with MIPI-CSI connectors. By default SL-MIPI-CSI-OV5640 module is equipped with fish-eye (120º) lens.

Features

  • Based on OV5640 CMOS video chip
  • Resolution 2592 x 1944 px
  • Fish-eye lens (120º)
  • Output formats: 8/10-b RGB RAW
  • MIPI-CSI interface (2 lanes)
  • Typical frame rates:
  • QSXGA (2592×1944): 15 fps
    • 1080p: 30 fps
    • 1280×960: 45 fps
    • 720p: 60 fps
    • VGA (640×480): 90 fps
    • QVGA (320×240): 120 fps
  • Shutter: rolling/frame exposure
  • Single rail +3.3V power supply
  • Configuration via I2C
  • Operating temperature -30÷+70°C
  • Fully compatible with SoMLabs carrier boards equippped with MIPI-CSI interface (FPC30 connector)
  • Built-in clock source
  • Built-in SL1 PMIC (developed by SoMLabs)
  • Connection with carrier board using FPC30 cable



Note: fish-eye camera lens distorts the picture perspective. Example below.


Fish-eye-view.jpg

Pictures

SL-MIPI-CSI-OV5640-2.jpg

SL-MIPI-CSI-OV5640-3.jpg

SL-MIPI-CSI-OV5640-4.jpg

SL-MIPI-CSI-OV5640-5.jpg

Ordering info

SL-MIPI-CSI-OV5640 - FPC 30-pin flat cable (A-A) is included.

Operating ranges

Parameter Value Unit Comment
Power Supply
3.3
V
Powered from carrier board
Current
0.16
A
Maximum peak value
Working temperature
-30…+70
oC -

Electrical parameters

Signal name Parameter Value Units
Min. Typ. Max.
+3.3V Supply Voltage 3.2 3.3 3.35 V
I3.3V Supply Current (3.3V) 0.11 .16 - mA
tPWRSEQ PMIC power-up time - 150 - ms
VIO I2C, RES, PWDN Input Voltage 0 3.3 3.5 V
fI2C I2C Controller Speed - - 400 kHz
RI2C I2C IOs Pull-up Resistance - 10 -
RPWDN Serial resistors voltage divider connected between FPC30 pin and PWDN input of OV5640 sensor - 2x10 -

MIPI-CSI (output) Pinout


SL-MIPI-CSI-OV5640-conn.png



FPC30 connector pin Function name Description
1 GND -
2 - -
3 - -
4 - -
5 - -
6 +3.3V Power supply
7 +3.3V Power supply
8 GND -
9 - -
10 PWDN OV5640 - Power Down input (active high, internal pull-down)
11 RESET OV5640 - Reset input (active low, internal pull-up)
12 GND -
13 SIOD_C SDA line of configuration I2C interface (internal pull-up)
14 SIO_D SCL line of configuration I2C interface (internal pull-up)
15 GND -
16 - -
17 - -
18 GND -
19 - -
20 - -
21 GND -
22 MDN1 CSI_DATA1_n
23 MDP1 CSI_DATA1_p
24 GND -
25 MDN0 CSI_DATA0_n
26 MDP0 CSI_DATA0_p
27 GND -
28 MCN CSI_CLK_n
29 MCP CSI_CLK_p
30 GND -

Dimensions


SL-MIPI-CSI-OV5640-dimension.png
NXP Partner ST Partner