StarSBC-6ULL

StarSBC-6ULL

StarSBC-6ULL

The StarSBC-6ULL is a complete, small-size, energy efficient computer (Single Board Computer, SBC). The StarSBC-6ULL is equipped with NXP i.MX6ULL application CPU, single Ethernet 10/100 interface with PHY, dual USB interface (host and OTG) and many communication interfaces (I2C, SPI, CAN, UART). The StarSBC-6ULL is an ideal solution for embedded projects, specially sensor hubs and similar IoT applications. The StarSOM-6ULL can often trim 8-12 months from design cycle and can be easy adapted to existing projects or can be used together with a dedicated expander boards (hats) with customized peripherals. For sensor hub application we offer dedicated expander ("hat" - SLH2-comm) for StarSBC-6ULL, equipped with 2xRS485, 2xRS232 and 2xCAN interfaces.

Documentation

• Datasheet and Pinout
• StarSBC-6ULL-STEP3D
• StarSBC-6ULL-SLC2-pin-config
• i.MX 6ULL Fact Sheet

How to

Embedded Linux Developer Guide

• Writing system image to eMMC memory
• Extending rootfs partition
• Connecting to WiFi network
• Using CAN bus on StarSBC-6ULL
• Using RS485 on StarSBC-6ULL
• Using RS232 on StarSBC-6ULL
• Setting MAC address on iMX6ULL

Yocto

Yocto Developer Guide

• iMX Yocto Mickledore meta-layer for StarSBC-6ULL by SoMLabs
• iMX Yocto Kirkstone meta-layer for StarSBC-6ULL by SoMLabs
• iMX Yocto Honister meta-layer for StarSBC-6ULL by SoMLabs
• iMX Yocto Hardknott meta-layer for StarSBC-6ULL by SoMLabs

Specifications

CPU	NXP i.MX6ULL Cortex-A7 32-bit processor (CPU clock up to 900MHz)
Memory	up to 1GB DDR3L
Storage	up to 32GB eMMC
Network	Wi-Fi 802.11b/g/n, Bluetooth BLE 1 x Ethernet: 10/100 (single PHY10/100 on-board)
RTC	built-in with external battery
I2C	up to 4 channels
SPI	up to 4 channels
CAN	up to 2 FlexCAN
UART	up to 8 channels
USB	2 x USB2.0 OTG Host/Device
Audio	Stereo MQS
Security	AES-128, ARM TrustZone, RNG
Temperature Range	0 to 70°C, -30 to +70°C (with WiFi/BLE module), -40 to +85°C
Dimensions	46mm x 60mm x 17mm module equipped with 2x26 pin 2,54 mm connectors