Personal tools


From SomLabs Wiki

Jump to: navigation, search
VisionCB-STM32MP1-STD VisionCB-STM32MP1-STD is a carrier board for the VisionSOM-STM32MP1 family of computer-on-modules which are powered by STMicroelectronics SOC STM32MP1 (dual core ARM Cortex-A7 + single Cortex-M4). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.

The carrier board connects with the SoM via a standard SODIMM connector. VisionCB-STM32MP1-STD is equipped with ST-Link/v2-1 SWD debugger and Linux serial console port on USB vCOM.

SOM compatibilityVisionSOM-STM32P1 module with STMicroelectronics STM32MP15x processor
SOM socketSODIMM200
Display connector24-bit RGB parallel interface (FPC50)
1 lane MIPI-DSI interface (FPC30)
Network1x Ethernet 10/100Mbit/s, RJ45
USBUSB 2.0 host x1
USB-OTG 2.0 x1
DebuggerBuilt-in ST-Link/v2-1 compatible (SWD)
Console interfaceUSB/UART
Switches2+1 (reset)
LEDs3+2 (3.3 and 5V power)
ConnectorsRaspberry Pi compatible (40 pins, 2,54mm)
Universal GPIO header (40 pins, 2,54mm)
MicroSD socket
RTC BackupBattery CR1220 socket
Power supplyExternal 9-12V DC
Temperature Range0 to +70°C
Dimensions160mm x 100mm x 17mm
NXP Partner ST Partner Renesas Partner