View source for SL-MIPI-CSI-OV5640 Datasheet and Pinout

{{PageHeader|SL-MIPI-CSI-OV5640 5Mpx camera module with MIPI-CSI interface and OV5640 video sensor Datasheet and Pinout}} __toc__
__jzpdf__
== General description ==
[[File:SL-MIPI-CSI-OV5640-1.png|800px|center]]
<br> 
SL-MIPI-CSI-OV5640 is the 5 Mpx color camera module. Module is equipped with MIPI-CSI interface and FPC30 connector  therefore SL-MIPI-CSI-OV5640 module is matched to the SoMLabs carrier boards.<br>The SL-MIPI-CSI-OV5640 is equipped with OV5640 hi-res HD 5 Mpx CMOS video sensor. Video interface is dual lane MIPI-CSI interface and module supports electronic shutter mode: rolling shutter/frame exposure.<br>As a result of  using advanced PMIC – SL1 – developed by SoMLabs, the SL-MIPI-CSI-OV5640 module is powered from single +3.3V line available in FPC connector.<br>
The SL-MIPI-CSI-OV5640 is fully compatible with SoMLabs carrier boards equipped with MIPI-CSI connectors. By default SL-MIPI-CSI-OV5640 module is equipped with fish-eye (120º) lens.

== Features ==
* Based on OV5640 CMOS video chip
* Resolution 2592 x 1944 px
* Fish-eye lens (120º)
* Output formats: 8/10-b RGB RAW
* MIPI-CSI interface (2 lanes)
* Typical frame rates:
* QSXGA (2592×1944): 15 fps
** 1080p: 30 fps
** 1280×960: 45 fps
** 720p: 60 fps
** VGA (640×480): 90 fps
** QVGA (320×240): 120 fps
* Shutter: rolling/frame exposure
* Single rail +3.3V power supply
* Configuration via I2C
* Operating temperature -30÷+70°C
* Fully compatible with SoMLabs carrier boards equippped with MIPI-CSI interface (FPC30 connector)
* Built-in clock source
* Built-in SL1 PMIC (developed by SoMLabs)
* Connection with carrier board using FPC30 cable


<br>Note: fish-eye camera lens distorts the picture perspective. Example below.
<br>[[File:fish-eye-view.jpg|900px|center]]

== Pictures ==
[[File:SL-MIPI-CSI-OV5640-2.jpg|800px|center]]<br>
[[File:SL-MIPI-CSI-OV5640-3.jpg|800px|center]]<br>
[[File:SL-MIPI-CSI-OV5640-4.jpg|800px|center]]<br>
[[File:SL-MIPI-CSI-OV5640-5.jpg|800px|center]]<br>

== Ordering info ==
'''SL-MIPI-CSI-OV5640''' - FPC 30-pin flat cable (A-A) is included.

== Operating ranges ==
{| class="wikitable"
! Parameter
! Value
! Unit
! Comment
|-
| Power Supply
| <center>3.3</center>
| <center>V</center>
| Powered from carrier board
|-
| Current
| <center>0.16</center>
| <center>A</center>
| Maximum peak value
|- 
|Working temperature
|<center>-30…+70</center>
|<sup>o</sup>C
| -
|}

== Electrical parameters ==
{| class="wikitable"
! rowspan="2" | Signal name
! rowspan="2" | Parameter
! colspan="3" | Value
! rowspan="2" | Units
|-
| Min.
| Typ.
| Max.
|-
| +3.3V
| Supply Voltage
| 3.2
| 3.3
| 3.35
| V
|-
| I<sub>3.3V</sub>
| Supply Current (3.3V)
| 0.11
| .16
| -
| mA
|-
| t<sub>PWRSEQ</sub>
| PMIC power-up time
| -
| 150
| -
| ms

|-
| VIO
| I2C, RES, PWDN Input Voltage 
| 0
| 3.3
| 3.5
| V
|-
| f<sub>I2C</sub>
| I2C Controller Speed
| -
| -
| 400
| kHz
|-
| R<sub>I2C</sub>
| I2C IOs Pull-up Resistance
| -
| 10
| -
| kΩ
|-
| R<sub>PWDN</sub>
| Serial resistors voltage divider connected between FPC30 pin and PWDN input of OV5640 sensor
| -
| 2x10
| -
| kΩ
|}

== MIPI-CSI (output) Pinout ==
<br>
[[File:SL-MIPI-CSI-OV5640-conn.png|center]]
<br />
<br>
{| class="wikitable"
! style="text-align: center; font-weight: bold;" | FPC30 connector pin
! style="text-align: center; font-weight: bold;" | Function name
! style="text-align: center; font-weight: bold;" | Description
|-
| 1
| GND
| -
|-
| 2
| -
| -
|-
| 3
| -
| -
|-
| 4
| -
| -
|-
| 5
| -
| -
|-
| 6
| +3.3V
| Power supply
|-
| 7
| +3.3V
| Power supply
|-
| 8
| GND
| -
|-
| 9
| -
| -
|-
| 10
| PWDN
| OV5640 - Power Down input (active high, internal pull-down)
|-
| 11
| RESET
| OV5640 - Reset input (active low, internal pull-up)
|-
| 12
| GND
| -
|-
| 13
| SIOD_C
| SCL line of configuration I2C interface (internal pull-up)
|-
| 14
| SIO_D
| SDA line of configuration I2C interface (internal pull-up)
|-
| 15
| GND
| -
|-
| 16
| -
| -
|-
| 17
| -
| -
|-
| 18
| GND
| -
|-
| 19
| -
| -
|-
| 20
| -
| -
|-
| 21
| GND
| -
|-
| 22
| MDN1
| CSI_DATA1_n
|-
| 23
| MDP1
| CSI_DATA1_p
|-
| 24
| GND
| -
|-
| 25
| MDN0
| CSI_DATA0_n
|-
| 26
| MDP0
| CSI_DATA0_p
|-
| 27
| GND
| -
|-
| 28
| MCN
| CSI_CLK_n
|-
| 29
| MCP
| CSI_CLK_p
|-
| 30
| GND
| -
|-
|}

== Dimensions ==
<br>
[[File:SL-MIPI-CSI-OV5640-dimension.png|center]]