VisionCB-6ULL-IND-HDMI v.1.0 Datasheet and Pinout

VisionCB-IND-HDMI Datasheet and Pinout

---

General description

VisionCB-IND-HDMI is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX 6UL or i.MX 6ULL application processors (ARM Cortex-A7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as HDMI video output, USB, Ethernet, additional microSD socket, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.

The carrier board connects with the SoM via a standard SODIMM connector.

Applications

• Industrial embedded Linux computer
• Home Appliances
• Home Automation – Smart Home
• Human-machine Interfaces (HMI)
• Point-of-sales (POS) terminals
• Cash Register
• 2D barcode scanners and printers
• Smart grid Infrastructure
• IoT gateways
• Residential getaways
• Machine vision equipment
• Robotics
• Fitness/outdoor equipment

Features

• Industrial grade Carrier Board (Base Board) compatible with the VisionSOM family of modules based on NXP i.MX 6UL / 6ULL application processors
• Core clock up to 696MHz (VisionSOM-6UL) or up to 900MHz (VisionSOM-6ULL)
• Up to 512MB SDRAM DDR3L (depends on used VisionSOM module)
• Up to 512MB NAND Flash / 32GB eMMC / uSD memory card (depends on used VisionSOM module)
• Optional Murata 802.11b/g/n Wi-Fi and Bluetooth v4.1+EDR module
• SoM Interface: SODIMM200
• Expansion Connectors:
  • 2x25 Pin Headers (Female)
  • microSD Card socket
• Communication Connectors:
  • 1x Ethernet 10/100Mbit/s, RJ45
  • 2x USB Host Type A connectors
  • 1x USB OTG Micro AB connector
• Display Interface: HDMI Connector (1366 x 768 Max. Resolution)
• Embedded Real-Time Clock (RTC) with back-up battery option (CR1220 battery needed)
• Power Supply
  • Terminal block connector: Input Voltage 9-12V DC
• Temperature Range: 0 to +70°C
• Board Size: 98mm x 79mm x 22mm

Pictures of VisionCB-IND-HDMI board

Version	Photo
VisionCB-IND-HDMI board only
VisionCB-IND-HDMI board with VisionSOM-6ULL

Ordering info

VisionCB-IND-HDMI

Block Diagram

Electrical parameters

Parameter	Value			Units	Comment
	Min.	Typ.	Max.
Power Supply (Con100 input)	9.0	11.0	12.0	V	Polarized terminal block connector
Supply current	-	-	0.15	A	Excluding LCD, USB and antoher external loads
Output GPIO voltage (Con1)	0	-	3.3	V	GPIO connector (current limited; max <250mA [RMS])

Onboard LEDs

LED	Color	Description
LED100 (PWR)	Green	Power indicator
LED200 (USB OVR)	Red	USB Overcurrent indicator

2x25 pin header

J504 Pin	Default function name	Description
1	CSI-HSYNC	Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
2	CSI-VSYNC	Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
3	CSI-DATA0	Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
4	CSI-DATA2	Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
5	CSI-DATA1	Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
6	CSI-DATA3	Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
7	CSI-DATA4	Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
8	CSI-DATA5	Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
9	CSI-MCLK	Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
10	CSI-DATA7	Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
11	CSI_PIXCLK	Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
12	CSI-DATA6	Video CMOS sensor signal or universal GPIO with 3.3V logic levels.
13	ENET2_TXD0	Default: ENET2 TXD0 line or universal GPIO with 3.3V logic levels.
14	UART3-RTS	Default: UART3 RTS line or universal GPIO with 3.3V logic levels.
15	ENET2_TXEN	Default: ENET2 TXEN line or universal GPIO with 3.3V logic levels.
16	UART2-RTS	Default: UART2 RTS line or universal GPIO with 3.3V logic levels.
17	ENET2_CRS_DV	Default: ENET2 CRS_DV line or universal GPIO with 3.3V logic levels.
18	UART3-CTS	Default: UART3 CTS line or universal GPIO with 3.3V logic levels.
19	ENET2_RXD1	Default: ENET2 RXD1 line or universal GPIO with 3.3V logic levels.
20	UART1-RTS	Default: UART1 RTS line or universal GPIO with 3.3V logic levels.
21	ENET2_RXER	Default: ENET2 RXER line or universal GPIO with 3.3V logic levels.
22	UART2-CTS	Default: UART2 CTS line or universal GPIO with 3.3V logic levels.
23	ENET2_TX_CLK	Default: ENET2 TX_CLK line or universal GPIO with 3.3V logic levels.
24	UART1-CTS	Default: UART1 CTS line or universal GPIO with 3.3V logic levels.
25	UART4-RXD	Default: UART4 RXD input or universal GPIO with 3.3V logic levels.
26	JTAG-TCK	Default: JTAG TCK input or universal GPIO with 3.3V logic levels.
27	UART4-TXD	Default: UART4 TXD output or universal GPIO with 3.3V logic levels.
28	JTAG-nTRST	JTAG TRST input line (active L).
29	UART3-RXD	Default: UART3 RxD input or universal GPIO with 3.3V logic levels.
30	JTAG-TMS	Default: JTAG TMS output or universal GPIO with 3.3V logic levels.
31	UART2-RXD	Default: UART2 RXD input or universal GPIO with 3.3V logic levels.
32	SNVS-TAMPER2	Tamper input (SNVS power domain) or GPIO 3.3V.
33	UART2-TXD	Default: UART2 TXD input or universal GPIO with 3.3V logic levels.
34	SNVS-TAMPER3	Tamper input (SNVS power domain) or GPIO 3.3V.
35	UART1-RXD	Default: UART1 RXD input or universal GPIO with 3.3V logic levels.
36	SNVS-TAMPER4	Tamper input (SNVS power domain) or GPIO 3.3V.
37	UART1-TXD	Default: UART1 TXD input or universal GPIO with 3.3V logic levels.
38	SNVS-TAMPER5	Tamper input (SNVS power domain) or GPIO 3.3V.
39	SNVS-TAMPER0	Tamper input (SNVS power domain) or GPIO 3.3V.
40	I2C-SCL	Universal GPIO with 3.3V logic levels.
41	SNVS-TAMPER1	Tamper input (SNVS power domain) or GPIO 3.3V.
42	I2C-SDA	Universal GPIO with 3.3V logic levels.
43	GPIO5	Default: General purpose pin GPIO5
44	JTAG-TDI	Default: JTAG TDI input or universal GPIO with 3.3V logic levels.
45	GPIO8	Default: General purpose pin GPIO8
46	GPIO9	Default: General purpose pin GPIO9
47	VCC-3V3	+3.3V generated by internal SOM LDO converter (limited load current, limit: < 250mA [RMS]).
48	GND	Ground
49	VCC-3V3	+3.3V generated by internal SOM LDO converter (limited load current, limit: < 250mA [RMS]).
50	GND	Ground

HDMI connector

Dimensions