Personal tools

SL-MIPI-CSI-OV5640 Datasheet and Pinout: Difference between revisions

From SomLabs Wiki

Jump to: navigation, search
← Older edit
 
(17 intermediate revisions by the same user not shown)
Line 28: Line 28:
* Built-in SL1 PMIC (developed by SoMLabs)
* Built-in SL1 PMIC (developed by SoMLabs)
* Connection with carrier board using FPC30 cable
* Connection with carrier board using FPC30 cable
<br>Note: fish-eye camera lens distorts the picture perspective. Example below.
<br>[[File:fish-eye-view.jpg|900px|center]]


== Pictures ==
== Pictures ==
Line 46: Line 50:
|-
|-
| Power Supply
| Power Supply
| <center>3.3 & 5.0</center>
| <center>3.3</center>
| <center>V</center>
| <center>V</center>
| Powered from carrier board
| Powered from carrier board
|-
|-
| Current
| Current
| <center>0.1</center>
| <center>0.16</center>
| <center>A</center>
| <center>A</center>
| Maximum peak value
| Maximum peak value
|-  
|-  
|Environment temperature
|Working temperature
|<center>-40…+85</center>
|<center>-30…+70</center>
|<sup>o</sup>C
|<sup>o</sup>C
| -
| -
Line 71: Line 75:
| Typ.
| Typ.
| Max.
| Max.
|-
| +5V
| Supply Voltage
| 4.75
| 5.0
| 5.25
| V
|-
|-
| +3.3V
| +3.3V
Line 85: Line 82:
| 3.35
| 3.35
| V
| V
|-
| I<sub>5V</sub>
| Supply Current (5V)
| 40
| 80
| 100
| mA
|-
|-
| I<sub>3.3V</sub>
| I<sub>3.3V</sub>
| Supply Current (3.3V)
| Supply Current (3.3V)
| 1
| 0.11
| 2.2
| .16
| 8
| -
| mA
| mA
|-
|-
| VIO<sub>I2C</sub>
| t<sub>PWRSEQ</sub>
| I2C Input Voltage
| PMIC power-up time
| 0
| -
| 3.3
| 150
| 3.6
| -
| V
| ms
 
|-
|-
| VIO<sub>RES/SPDIF</sub>
| VIO
| RES/SPDIF Input Voltage  
| I2C, RES, PWDN Input Voltage  
| 0
| 0
| 3.3
| 3.3
| 3.6
| 3.5
| V
| V
|-
|-
Line 121: Line 112:
| kHz
| kHz
|-
|-
| R<sub>INT</sub>
| R<sub>I2C</sub>
| Interrupt Output Pull-up Resistance
| I2C IOs Pull-up Resistance
| -
| -
| 4.7
| 10
| -
| -
| kΩ
| kΩ
|-
|-
| R<sub>I2C</sub>
| R<sub>PWDN</sub>
| I2C IOs Pull-up Resistance
| Serial resistors voltage divider connected between FPC30 pin and PWDN input of OV5640 sensor
| -
| -
| 4.7
| 2x10
| -
| -
| kΩ
| kΩ
Line 155: Line 146:
|-
|-
| 3
| 3
| HPD
| -
| HPD line from HDMI (voltage translated to 3.3V)
| -
|-
|-
| 4
| 4
| +5V
| -
| Power supply (input)
| -
|-
|-
| 5
| 5
| +5V
| -
| Power supply (input)
| -
|-
|-
| 6
| 6
| +3.3V
| +3.3V
| Power supply (input)
| Power supply
|-
|-
| 7
| 7
| +3.3V
| +3.3V
| Power supply (input)
| Power supply
|-
|-
| 8
| 8
Line 179: Line 170:
|-
|-
| 9
| 9
| SPDIF-TX
| -
| SPDIF input from SBC
| -
|-
|-
| 10
| 10
| INT
| PWDN
| Interrupt output (voltage translated to 3.3V)
| OV5640 - Power Down input (active high, internal pull-down)
|-
|-
| 11
| 11
| RESET
| RESET
| Reset input (voltage translated to 3.3V)
| OV5640 - Reset input (active low, internal pull-up)
|-
|-
| 12
| 12
Line 195: Line 186:
|-
|-
| 13
| 13
| SDA
| SIOD_C
| I2C SDA line (voltage translated to 3.3V)
| SCL line of configuration I2C interface (internal pull-up)
|-
|-
| 14
| 14
| SCL
| SIO_D
| I2C SCL line (voltage translated to 3.3V)
| SDA line of configuration I2C interface (internal pull-up)
|-
|-
| 15
| 15
Line 207: Line 198:
|-
|-
| 16
| 16
| D3n
| -
| MIPI-DSI lane 3 negative line
| -
|-
|-
| 17
| 17
| D3p
| -
| MIPI-DSI lane 3 positive line
| -
|-
|-
| 18
| 18
Line 219: Line 210:
|-
|-
| 19
| 19
| D2n
| -
| MIPI-DSI lane 2 negative line
| -
|-
|-
| 20
| 20
| D2p
| -
| MIPI-DSI lane 2 positive line
| -
|-
|-
| 21
| 21
Line 231: Line 222:
|-
|-
| 22
| 22
| D1n
| MDN1
| MIPI-DSI lane 1 negative line
| CSI_DATA1_n
|-
|-
| 23
| 23
| D1p
| MDP1
| MIPI-DSI lane 1 positive line
| CSI_DATA1_p
|-
|-
| 24
| 24
Line 243: Line 234:
|-
|-
| 25
| 25
| D0n
| MDN0
| MIPI-DSI lane 0 negative line
| CSI_DATA0_n
|-
|-
| 26
| 26
| D0p
| MDP0
| MIPI-DSI lane 0 positive line
| CSI_DATA0_p
|-
|-
| 27
| 27
Line 255: Line 246:
|-
|-
| 28
| 28
| CLKn
| MCN
| MIPI-DSI clock negative line
| CSI_CLK_n
|-
|-
| 29
| 29
| CLKp
| MCP
| MIPI-DSI clock positive line
| CSI_CLK_p
|-
|-
| 30
| 30
| GND
| GND
| -
| -
|-
|}
|}


== Dimensions ==
== Dimensions ==
<br>
<br>
[[File:sl-mipi-lvds-hdmi-cnv-dimension.png|center]]
[[File:SL-MIPI-CSI-OV5640-dimension.png|center]]

Latest revision as of 13:41, 27 November 2023

SL-MIPI-CSI-OV5640 5Mpx camera module with MIPI-CSI interface and OV5640 video sensor Datasheet and Pinout

General description


SL-MIPI-CSI-OV5640 is the 5 Mpx color camera module. Module is equipped with MIPI-CSI interface and FPC30 connector therefore SL-MIPI-CSI-OV5640 module is matched to the SoMLabs carrier boards.
The SL-MIPI-CSI-OV5640 is equipped with OV5640 hi-res HD 5 Mpx CMOS video sensor. Video interface is dual lane MIPI-CSI interface and module supports electronic shutter mode: rolling shutter/frame exposure.
As a result of using advanced PMIC – SL1 – developed by SoMLabs, the SL-MIPI-CSI-OV5640 module is powered from single +3.3V line available in FPC connector.
The SL-MIPI-CSI-OV5640 is fully compatible with SoMLabs carrier boards equipped with MIPI-CSI connectors. By default SL-MIPI-CSI-OV5640 module is equipped with fish-eye (120º) lens.

Features

  • Based on OV5640 CMOS video chip
  • Resolution 2592 x 1944 px
  • Fish-eye lens (120º)
  • Output formats: 8/10-b RGB RAW
  • MIPI-CSI interface (2 lanes)
  • Typical frame rates:
  • QSXGA (2592×1944): 15 fps
    • 1080p: 30 fps
    • 1280×960: 45 fps
    • 720p: 60 fps
    • VGA (640×480): 90 fps
    • QVGA (320×240): 120 fps
  • Shutter: rolling/frame exposure
  • Single rail +3.3V power supply
  • Configuration via I2C
  • Operating temperature -30÷+70°C
  • Fully compatible with SoMLabs carrier boards equippped with MIPI-CSI interface (FPC30 connector)
  • Built-in clock source
  • Built-in SL1 PMIC (developed by SoMLabs)
  • Connection with carrier board using FPC30 cable



Note: fish-eye camera lens distorts the picture perspective. Example below.


Pictures





Ordering info

SL-MIPI-CSI-OV5640 - FPC 30-pin flat cable (A-A) is included.

Operating ranges

Parameter Value Unit Comment
Power Supply
3.3
V
 Powered from carrier board
Current
0.16
A
 Maximum peak value
Working temperature
-30…+70
 oC -

Electrical parameters

Signal name Parameter Value Units
Min. Typ. Max.
+3.3V Supply Voltage 3.2 3.3 3.35 V
I3.3V Supply Current (3.3V) 0.11 .16 - mA
tPWRSEQ PMIC power-up time - 150 - ms
VIO I2C, RES, PWDN Input Voltage 0 3.3 3.5 V
fI2C I2C Controller Speed - - 400 kHz
RI2C I2C IOs Pull-up Resistance - 10 - kΩ
RPWDN Serial resistors voltage divider connected between FPC30 pin and PWDN input of OV5640 sensor - 2x10 - kΩ

MIPI-CSI (output) Pinout




FPC30 connector pin Function name Description
1 GND -
2 - -
3 - -
4 - -
5 - -
6 +3.3V Power supply
7 +3.3V Power supply
8 GND -
9 - -
10 PWDN OV5640 - Power Down input (active high, internal pull-down)
11 RESET OV5640 - Reset input (active low, internal pull-up)
12 GND -
13 SIOD_C SCL line of configuration I2C interface (internal pull-up)
14 SIO_D SDA line of configuration I2C interface (internal pull-up)
15 GND -
16 - -
17 - -
18 GND -
19 - -
20 - -
21 GND -
22 MDN1 CSI_DATA1_n
23 MDP1 CSI_DATA1_p
24 GND -
25 MDN0 CSI_DATA0_n
26 MDP0 CSI_DATA0_p
27 GND -
28 MCN CSI_CLK_n
29 MCP CSI_CLK_p
30 GND -

Dimensions


Retrieved from "https://wiki.somlabs.com/index.php?title=SL-MIPI-CSI-OV5640_Datasheet_and_Pinout&oldid=3501"