Difference between revisions of "TitanSBC-8Mmini Datasheet and Pinout"
From SomLabs Wiki
(→HDMI output) |
(→Hub USB) |
||
Line 1,012: | Line 1,012: | ||
== Hub USB == | == Hub USB == | ||
The TitanSBC-8Mmini is equipped with on-board 4 channel USB hub, based on GL852G MTT controller. | The TitanSBC-8Mmini is equipped with on-board 4 channel USB hub, based on GL852G MTT controller. | ||
− | [[File:TitanSBC-8Mmini- | + | [[File:TitanSBC-8Mmini-hub-usb.png|center]] |
− | |||
== HDMI output == | == HDMI output == |
Revision as of 18:21, 2 January 2024
TitanSBC-8Mmini Datasheet and Pinout
Contents
General description
The TitanSBC-8Mmini (SLC5) is a new generation single board computer (SBC), based on energy efficient and fast 64-bit quad core industrial, heterogenous MPU NXP i.MX8Mmini, equipped with Cortex-A53 cores.
The main MPU of TitanSBC-8Mmini is equippped with real-time Cortex-M4 core, Gigabit Ethernet interface, video codec (H.265, H.264, VP8, VP9), PCIe 2.0 interface and another communication peripherals often used in industrial applications. Internal GPU offers up to 1080p60 resolution on HDMI interfaces with independent 2D (GC320) and 3D (Vivante GCNano Ultra) GPU engines. The MPU cores run at 1.8GHz without thermal throttling using the stock heat sink allowing a robust and quiet computer. The low-power LPDDR4 RAM memory used by default in TitanSBC-8Mmini computer additionally helps save energy.
The TitanSBC-8Mmini is equipped with on-board 1Gb/s Ethernet interface, half-duplex RS-485 interface, on-board RTC with external battery connector, audio codec (with headphone and microphone Jack connector and external speakers outputs), HDMI, 4 x USB 2.0 host connectors, 1 x USB-OTG connector, MIPI-CSI camera connector, PCIe 2.0 FPC connector (dedicated M.2 adapter available: SL-ADP-PCIe-M2), MicroSD card connector, DC/DC converter adapted to 12V external power supply.
Additionally the TitanSBC-8Mmini SBC is equipped with easy to use 2×20 pin connectors with 28 GPIOs for any use in user application.
The StarSBC-6ULL supports industrial grade embedded applications.
Applications
- Multimedia Interfaces
- Home Control Panels
- Industrial HMI
- Industrial Controls
- Home Security and Surveillance
- Edge Computing
- IoT Sensor Hubs
- Home Appliances
- Home Automation – Smart Home
- Robotic Appliance
- Transport Ticketing
- Smart Lighting
- Point-of-sales (POS) terminals
- Cash Register
- Smart grid infrastructure
- Outdoor equipment
Features
- Powered by quad-core heterogenous NXP i.MX8Mmini (Cortex-A53 + Cortex-M4) application processor
- Core clock up to 1.8GHz
- Up to 4GB LPDDR4
- Up to 32GB eMMC
- HDMI video output (3D + 2D GPUs, full HD resolution)
- Single MIPI-CSI camera input
- Half-duplex RS-485 interface on-board
- 10/100/1000 Ethernet PHY on-board
- 4 x USB 2.0 (host) + USB-OTG interfaces
- PCIe 2.0 connector (FPC, 16 pin, 0.5 mm)
- Stereo audio codec (headphone, microphone and speakres connectors)
- Power-efficient and cost-optimized solution
- Ideal for industrial IoT and embedded applications
- Integrated security features
Pictures of SBC versions
Version | Photo |
---|---|
eMMC |
Ordering info
SLC | Product type SLC - Single Board Computer |
N | Form factor 5 - TitanSBC |
X8MM | CPU Family X8MM - NXP i.MX8Mmini |
CpuType | CPU Type QC - Fully featured: 4 x Cortex-A53, 1 x Cortex-M4, GPU3D, video codec |
Clock | CPU Clock Speed 1600C - 1.6GHz 1800C - 1.8GHz |
RamSize | LPDDR4 RAM Size 01GR - 1GB 02GR - 2GB 04GR - 4GB |
FlashSize | Flash Size Type and Density 04GE - 4GB eMMC 08GE - 8GB eMMC 16GE - 16GB eMMC 32GE - 32GB eMMC |
SF | Special Features 0SF - Fully equipped |
TEMP | Operating Temperature C - Consumer: 0 to +70 C E - Extended: -25 to +70 C I - Industrial: -40 to +85 C |
Block Diagram
Operating ranges
Parameter | Value | Unit | Comment |
---|---|---|---|
USB Power Supply | |
|
Connected to J7001 |
External Power Supply | |
|
Connected to J1502 |
GPIO voltage | |
|
- |
Environment temperature4 | |
oC | Industrial range |
|
Extended range | ||
|
Consumer range |
Note:
1. MicroUSB-OTG connector.
2. Power-jack connector compatible with Wuerth Elektronik 694103304002 (1.35 mm).
3. Only one power source can be active at the time (connected to J700 or to J150).
4. Maximum MPU junction temperature is +105oC (industrial version) or +95oC (consumer version).
Electrical parameters
SBC signal name |
Parameter | Value | Units | ||
---|---|---|---|---|---|
Min. | Typ. | Max. | |||
EXT PWR | SBC external supply voltage1 | 9 | 12 | 14 | V |
USB PWR | SBC supply USB-OTG voltage2 | - | 5 | - | V |
VGPIO | GPIO Input Voltage | 0 | - | 3.63 | V |
VDD-3V3 | Aux power source | 3.2 | 3.3 | 3.35 | V |
VDD-5V0 | Aux power source | 4.65 | 4.85 | 5.0 | V |
I3V3 | Max load of aux power source | 0 | - | 100 | mA |
I5V0 | Max load of aux power source | 0 | - | 100 | mA |
IEXT | Total Supply Current | TBD | TBD | TBD | mA |
I+5V | Total Supply Current | TBD | TBD | TBD | mA |
VBATT | RTC/SNVS Backup Battery Supply |
2.66 | - | 3.6 | V |
Notes:
1. The external voltage connected to J150 connector.
2. The external voltage connected to J700 connector.
3. Applying the maximum voltage 3.6V results in shorten lifetime. Recommended value is smaller than 3.5V.
External GPIOs
Connector pin number | Default SBC function | Default pin name | GPIO | MPU ball number | Notes |
---|---|---|---|---|---|
1 | VDD-3V3 | - | - | - | Power source for external devices (up to 100 mA) |
2 | VDD-5V0 | - | - | - | Power source for external devices (totally up to 100 mA on both VDD-5V0) |
3 | I2C4-SDA | I2C4-SDA | GPIO5-IO21 | E13 | Internally pull-uped with 4.7k connected to 3.3V |
4 | VDD-5V0 | - | - | - | Power source for external devices (totally up to 100 mA on both VDD-5V0) |
5 | I2C4-SCL | I2C4-SCL | GPIO5-IO20 | D13 | Internally pull-uped with 4.7k connected to 3.3V |
6 | GND | - | - | - | - |
7 | GPIO4-IO13 | SAI-TXD1 | GPIO4-IO13 | AF20 | - |
8 | UART2-TXD | UART2-TXD | GPIO5-IO24 | F15 | - |
9 | GND | - | - | - | - |
10 | UART2-RXD | UART2-RXD | GPIO5-IO25 | E15 | - |
11 | GPIO4-IO12 | SAI1-TXD0 | GPIO4-IO12 | AG20 | - |
12 | PWM2 | SPDIF-RX | GPIO5-IO04 | AG9 | - |
13 | GPIO4-IO09 | SAI1-RXD7 | GPIO4-IO09 | AF19 | - |
14 | GND | - | - | - | - |
15 | GPIO4-IO08 | SAI1-RXD6 | GPIO4-IO08 | AG19 | - |
16 | UART1-RXD | SAI1-RXFS | GPIO4-IO21 | AC19 | - |
17 | VDD-3V3 | - | - | - | - |
18 | UART1-TXD | SAI2-RXC | GPIO4-IO22 | AB22 | - |
19 | ECSPI2-MOSI | ECSPI2-MOSI | GPIO5-IO11 | B8 | - |
20 | GND | - | - | - | - |
21 | ECSPI2-MISO | ECSPI2-MISO | GPIO5-IO12 | A8 | - |
22 | GPIO4-IO7 | SAI1-RXD5 | GPIO4-IO07 | AF18 | - |
23 | ECSPI2-SCLK | ECSPI2-SCLK | GPIO5-IO10 | E6 | - |
24 | ECSPI2-SS0 | ECSPI2-SS0 | GPIO5-IO13 | A6 | - |
25 | GND | - | - | - | - |
26 | GPIO4-IO06 | SAI1-RXD4 | GPIO4-IO06 | AG18 | - |
27 | I2C3-SDA | I2C3-SDA | GPIO5-IO19 | F10 | Internally pull-uped with 4.7k connected to 3.3V |
28 | I2C3-SCL | I2C3-SCL | GPIO5-IO18 | E10 | Internally pull-uped with 4.7k connected to 3.3V |
29 | UART1-CTS | SAI2-RXD | GPIO4-IO23 | AC24 | - |
30 | GND | - | - | - | - |
31 | UART1-RTS | SAI2-TXFS | GPIO4-IO24 | AD23 | - |
32 | GPIO4-IO05 | SAI1-RXD3 | GPIO4-IO05 | AF17 | - |
33 | PWM1 | SPDIF-EXT-CLK | GPIO5-IO05 | AF8 | - |
34 | GND | - | - | - | - |
35 | GPIO4-IO01 | SAI1-RXC | GPIO4-IO01 | AF16 | - |
36 | GPIO4-IO04 | SAI1-RXD2 | GPIO4-IO04 | AG17 | - |
37 | GPIO4-IO02 | SAI1-RXD0 | GPIO4-IO02 | AG15 | - |
38 | GPIO4-IO00 | SAI1-RXFS | GPIO4-IO00 | AG16 | - |
39 | GND | - | - | - | - |
40 | GPIO4-IO03 | SAI1-RXD1 | GPIO4-IO03 | AF15 | - |
Note:
1. GPIOs are compatible with TTL-LV/CMOS33 voltage levels.
2. Use of internal MPU pull-up resistors is not recommended (ERR050080, Mask Set Errata for Mask 0N87W, Rev. 2, 6/2022).
Internal GPIO connections
Default SBC function | Default pin name | GPIO | MPU ball number | Description |
---|---|---|---|---|
I2C-18-SCL | I2C2-SCL | GPIO5-IO16 | D10 | PMIC, DSI-HDMI converter, internally pull-uped with 4.7k |
I2C-18-SDA | I2C2-SDA | GPIO5-IO17 | D9 | PMIC, DSI-HDMI converter, internally pull-uped with 4.7k |
SYS-LED | SD1-DATA0 | GPIO2-IO02 | Y27 | System LED (heartbeat) |
UART3-TXEN | SAI1-TXD4 | GPIO4-IO16 | AG22 | RS485 (DE in MAX3485) |
UART3-RXD | UART3-RXD | GPIO5-IO26 | E18 | RS485 |
UART3-TXD | UART3-TXD | GPIO5-IO27 | D18 | RS485 |
CAM-GPIO0 | SD1-CLK | GPIO2-IO00 | V26 | MIPI-CSI (camera input) auxiliary line |
CAM-GPIO1 | SD1-CMD | GPIO2-IO01 | V27 | MIPI-CSI (camera input) auxiliary line |
UART4-RXD | UART4-RXD | GPIO5-IO28 | F19 | Console UART |
UART4-TXD | UART4-TXD | GPIO5-IO29 | F18 | Console UART |
PMIC-INT | GPIO1-IO01 | GPIO1-IO01 | AF14 | PMIC interrupt |
WDOG-B | GPIO1-IO02 | GPIO1-IO02 | AG13 | System watchdog input |
HDMI-DETECT | GPIO1-IO06 | GPIO1-IO06 | AG11 | HDMI detect input |
M2H-INT | GPIO1-IO07 | GPIO1-IO07 | AF11 | HDMI interrupt |
M2H-RESET | GPIO1-IO09 | GPIO1-IO09 | AF10 | HDMI converter reset |
SPDIF-TX | SPDIF-TX | GPIO5-IO03 | AF9 | HDMI audio output |
USB1-VBUS-EN | GPIO1-IO12 | GPIO1-IO12 | AB10 | USB control line |
USB1-VBUS-OC | GPIO1-IO13 | GPIO1-IO13 | AD9 | USB control line |
USB2-VBUS-EN | GPIO1-IO14 | GPIO1-IO14 | AC9 | USB control line |
USB2-VBUS-OC | GPIO1-IO15 | GPIO1-IO15 | AB9 | USB control line |
USB-RESET | SAI3-RXFS | GPIO4-IO28 | AG8 | USB hub reset |
RTC-INT | SAI3-RXC | GPIO4-IO29 | AG7 | RTC interrupt |
I2C-33-SCL | I2C1-SCL | GPIO5-IO14 | E9 | RTC, audio codec, HDMI-DDC, PCIe, MIPI-CSI |
I2C-33-SDA | I2C1-SDA | GPIO5-IO15 | F9 | RTC, audio codec, HDMI-DDC, PCIe, MIPI-CSI |
SAI3-MCLK | SAI3-MCLK | GPIO4-IO02 | AD6 | Audio codec MCLK line |
SAI3-TXC | SAI3-TXC | GPIO5-IO00 | AG6 | Audio codec BCLK line |
SAI3-TXFS | SAI3-TXFS | GPIO4-IO31 | AC6 | Audio codec FS line |
SAI3-TXD | SAI3-TXD | GPIO5-IO01 | AF6 | Audio codec DACIN line |
SAI3-RXD | SAI3-RXD | GPIO4-IO30 | AF7 | Audio codec ADCOUT line |
ENET-INT | ECSPI1-SCLK | GPIO5-IO06 | D6 | Ethernet PHY interrput |
ENET-PHY-RESET | SAI1-TXD2 | GPIO4-IO14 | AG21 | Ethernet PHY reset |
ENET1-RXC | ENET1-RXC | GPIO1-IO25 | AE26 | Ethernet PHY |
ENET1-RX-CTL | ENET1-RX-CTL | GPIO1-IO24 | AF27 | Ethernet PHY |
ENET1-RXD3 | ENET1-RXD3 | GPIO1-IO29 | AC26 | Ethernet PHY |
ENET1-RXD2 | ENET1-RXD2 | GPIO1-IO28 | AD26 | Ethernet PHY |
ENET1-RXD1 | ENET1-RXD1 | GPIO1-IO27 | AD27 | Ethernet PHY |
ENET1-RXD0 | ENET1-RXD0 | GPIO1-IO26 | AE27 | Ethernet PHY |
ENET1-TXC | ENET1-TXC | GPIO1-IO23 | AG24 | Ethernet PHY |
ENET1-TXD3 | ENET1-TXD3 | GPIO1-IO18 | AF25 | Ethernet PHY |
ENET1-TXD2 | ENET1-TXD2 | GPIO1-IO19 | AG25 | Ethernet PHY |
ENET1-TXD1 | ENET1-TXD1 | GPIO1-IO20 | AF26 | Ethernet PHY |
ENET1-TXD0 | ENET1-TXD0 | GPIO1-IO21 | AG26 | Ethernet PHY |
ENET1-TX-CTL | ENET1-TX-CTL | GPIO1-IO22 | AF24 | Ethernet PHY |
ENET1-MDC | ENET1-MDC | GPIO1-IO16 | AC27 | Ethernet PHY |
ENET1-MDIO | ENET1-MDIO | GPIO1-IO17 | AB27 | Ethernet PHY |
SDIO-VSELECT | GPIO1-IO04 | GPIO1-IO04 | AG12 | MicroSD card - NVCC-SD2 voltage selector 1.8/3.3V |
SD2-CLK | SD2-CLK | GPIO2-IO13 | W23 | MicroSD card |
SD2-CMD | SD2-CMD | GPIO2-IO14 | W24 | MicroSD card |
SD2-DATA0 | SD2-DATA0 | GPIO2-IO15 | AB23 | MicroSD card |
SD2-DATA1 | SD2-DATA1 | GPIO2-IO16 | AB24 | MicroSD card |
SD2-DATA2 | SD2-DATA2 | GPIO2-IO17 | V24 | MicroSD card |
SD2-DATA3 | SD2-DATA3 | GPIO2-IO18 | V23 | MicroSD card |
SD2-CD | SD2-CD | GPIO2-IO12 | AA26 | MicroSD card |
Audio codec and amplifiers
The TitanSBC-8Mmini is equipped with 24-bit audio codec (NAU88C22YG). The NAU88C22YG includes drivers for speaker, headphone, and differential or stereo line outputs, and integrates preamps for stereo differential microphones, significantly reducing external component requirements.
Default SBC function | Default pin name | GPIO | MPU ball number | Description |
---|---|---|---|---|
SAI3-MCLK | SAI3-MCLK | GPIO4-IO02 | AD6 | Audio codec MCLK line |
SAI3-TXC | SAI3-TXC | GPIO5-IO00 | AG6 | Audio codec BCLK line |
SAI3-TXFS | SAI3-TXFS | GPIO4-IO31 | AC6 | Audio codec FS line |
SAI3-TXD | SAI3-TXD | GPIO5-IO01 | AF6 | Audio codec DACIN line |
SAI3-RXD | SAI3-RXD | GPIO4-IO30 | AF7 | Audio codec ADCOUT line |
Note:
1. Codec is configured with I2C1 MPU interface.
Hub USB
The TitanSBC-8Mmini is equipped with on-board 4 channel USB hub, based on GL852G MTT controller.
HDMI output
The TitanSBC-8Mmini is equipped with on-board MIPI-CSI to HDMI converter.
Power supply
The TitanSBC-8Mmini has two alternative power supply ports: 9-12VDC (power-jack connector, Wuerth Elektronik 694103304002, 1.35 mm) or 5VDC (USB-OTG).